Menu
EUR

Deutz-Fahr Agrotron 150 tractor parts & technical data

Servicing a Deutz-Fahr Agrotron 150 starts with the right part. This page lists more than 200 of them, among them trailer couplings, lighting and electrics.

241 parts found for Deutz-Fahr Agrotron 150
Show:
GRANIT Water pump with gasket engine
5%
GRANIT
Water pump with gasket engine
€173,57 €143,45 €164,85 €136,24
 
Radiator Deutz-Fahr Agrotron 80-150, 4.70-6.45, MK3, New
5%
Radiator Deutz-Fahr Agrotron 80-150, 4.70-6.45, MK3, New
To fit as: Deutz-Fahr Agrotron 80–150 (incl. MK3, New, 4.xx & 6.xx series)
€758,21 €626,62 €720,25 €595,25
 
Optibelt V-belt single for engine cooling
Optibelt
V-belt single for engine cooling
€36,70 €30,33
 
GRANIT Exhaust gasket exhaust manifold inner Ø 39 mm, hole spacing 64 mm
GRANIT
Exhaust gasket exhaust manifold inner Ø 39 mm, hole spacing 64 mm
Dimensions: innen Ø 39 mm, Lochabstand 64 mm, Schrauben Ø 10 mm.
€3,65 €3,02
 
GRANIT Oil drain valve M18 x 1,5
5%
GRANIT
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
 
GRANIT Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
GRANIT
Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
Version: Thread M8, M10, Length: 72 mm. Thread: M8 / M10. Length: 72 mm.
€23,25 €19,21
 
Stop solenoid switch Deutz-Fahr
5%
Stop solenoid switch Deutz-Fahr
€408,62 €337,70 €388,15 €320,79
 
GRANIT Bolt set 2de steering valve 3x M8 x 130
GRANIT
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€14,95 €12,36
 
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
18%
Walterscheid
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
 
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
21%
Walterscheid
Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 ...
€1.175,21 €971,25 €923,35 €763,10
 
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
18%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.058,75 €875,00 €873,45 €721,86
 
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800...
€1.158,06 €957,07 €909,90 €751,98
 
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
18%
Walterscheid
Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
 
MANN-FILTER Secondary air filter CF400
40%
MANN-FILTER
Secondary air filter CF400
Suitable main filter 565C16400
€60,98 €50,40 €36,30 €30,00
 
MANN-FILTER Fuel filter WK731
MANN-FILTER
Fuel filter WK731
€10,25 €8,47
 
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sl...
€1.214,60 €1.003,80 €954,30 €788,68
 
Walterscheid Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
18%
Walterscheid
Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value (kN): 102 |...
€2.169,53 €1.793,00 €1.789,85 €1.479,21
 
MAHLE Aircon compressor 12 V, pulley Ø 150 mm, 2 grooves
40%
MAHLE
Aircon compressor 12 V, pulley Ø 150 mm, 2 grooves
Fixing: EM | Pulley Ø (mm): 150 | Nominal voltage (V): 12 | Suitable oil: PAG 46...
€740,70 €612,15 €440,85 €364,34
 
WAECO PAG-compressor oil ISO 46, R134a - 250 ml can
WAECO
PAG-compressor oil ISO 46, R134a - 250 ml can
€23,95 €19,79
 
Alternator 14 V / 95 A, flange 56 mm
5%
Alternator 14 V / 95 A, flange 56 mm
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | Pulley Ø (...
€185,86 €153,60 €176,55 €145,91
 
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
20%
HELLA
Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€571,00 €471,90 €459,00 €379,34
 
ZF Planetary carrier Ø 318 mm, inner-Ø 209 mm ZF front axle 4475006044
5%
ZF
Planetary carrier Ø 318 mm, inner-Ø 209 mm ZF front axle 4475006044
€1.941,60 €1.604,63 €1.844,50 €1.524,38
 
GRANIT Radiator copper with frame Deutz-Fahr Agrotron 80-150, 4.70-6.45
5%
GRANIT
Radiator copper with frame Deutz-Fahr Agrotron 80-150, 4.70-6.45
To fit as: Deutz-Fahr Series Agrotron: 80–120, 135, 150; Series Agrotron 4.xx: 4...
€832,23 €687,79 €790,60 €653,39
 
MANN-FILTER Filter set engine oil, fuel, air, air inner
38%
MANN-FILTER
Filter set engine oil, fuel, air, air inner
To fit: Deutz. To fit type: Agrotron. Set consisting of: Engine oil filter, Main...
€142,21 €117,53 €88,85 €73,43
 
Showing 49 - 72 of 241

Deutz-Fahr Agrotron 150 parts

When the engine will not turn over

A slow or silent start on a Deutz-Fahr Agrotron 150 is not always the starter motor. Before you fit a new one, check the battery charge, then the battery terminals and the earth strap between engine and frame. A corroded earth can stop a healthy starter dead. If the starter clicks but does not turn with a good battery, the solenoid or the motor itself is the next suspect. This page has starter motors for the Agrotron 150 among more than 200 parts for this tractor.

Engine, cab and electrics

  • Cylinder head gaskets, including VICTOR REINZ, and air receiver gaskets
  • V-belts
  • Gas struts, for example for the roof window
  • Work lamps and wide-angle mirrors, with HELLA among the brands
  • Rocker switches and connection cables
  • Complete ball joints for the steering

Hitching up

At the rear there are ball drawbars, drawbar frames, Piton Fix rails and adapter plates. Walterscheid and ROCKINGER are among the makers next to GRANIT. When replacing a hitch component, measure the rail width and hole pattern of the parts already on the tractor.

Matching the part to your tractor

Check the type plate to confirm you have an Agrotron 150 and note the serial number. For gaskets, belts and switches, compare the reference number on the old part with the number listed for each item. With gas struts, note where the old one sat, as the roof window and the door each take their own version.

Head gasket work

Coolant that disappears, white smoke or oil in the coolant all point towards the cylinder head gasket. A new gasket only seals on clean, flat faces, so clean the head and block without scoring them and check the head with a straight edge and feeler gauge. Have a warped head skimmed before refitting it. Use new head bolts where the manual calls for them and tighten them in the right order and in stages. Note the thickness marked on the old gasket so the new one matches.

Other Agrotron models

Running more than one Agrotron on the farm? These pages list what fits the Deutz-Fahr Agrotron 85, Deutz-Fahr Agrotron 100, Deutz-Fahr Agrotron 106, Deutz-Fahr Agrotron 115, Deutz-Fahr Agrotron 120 and Deutz-Fahr Agrotron 135. You may also come across the Agrotron 90 and 105, two smaller tractors from this family. Working on a different Deutz-Fahr tractor? Head over to Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart