Menu
EUR

Deutz-Fahr Agrotron 6.30 tractor parts & technical data

See more than 200 parts for the Deutz-Fahr Agrotron 6.30. The range runs from trailer couplings to lighting and electrics, so the right part is quick to find.

203 parts found for Deutz-Fahr Agrotron 6.30
Show:
PROBOSS Passenger seat fabric Deutz
18%
PROBOSS
Passenger seat fabric Deutz
Technical data: High quality Meets all legal requirements . Reference no.: 04429...
€711,78 €588,25 €587,20 €485,29
 
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
5%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€287,19 €237,35 €272,80 €225,45
 
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
5%
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€359,15 €296,82 €341,15 €281,94
 
GRANIT Gas strut door-, for- or rear window 200 N, 505 mm
5%
GRANIT
Gas strut door-, for- or rear window 200 N, 505 mm
suitable for: Tür-, Front- oder Heckscheibe. Newtons: 200. A: 505 mm. B: 365 mm....
€49,90 €41,24 €47,40 €39,17
 
Gas strut steering column adjustment 400 N, 200 mm, stroke 30 mm
5%
Gas strut steering column adjustment 400 N, 200 mm, stroke 30 mm
suitable for: Lenksäulenverstellung. Newtons: 400. A: 200 mm. B: 130 mm. C: 10 m...
€81,14 €67,06 €77,00 €63,64
 
GRANIT Window rubber 26,5 x 16 mm, clamping range 1,5 - 3,5 mm - 5 meter
5%
GRANIT
Window rubber 26,5 x 16 mm, clamping range 1,5 - 3,5 mm - 5 meter
Clamping range: 1,5 - 3,5 mm. Length: 5 m. B: 26,5 mm. H: 16 mm.
€101,56 €83,93 €96,45 €79,71
 
GRANIT Starter switch 12 V / 24 V, 5 blade connections - 2 keys
10%
GRANIT
Starter switch 12 V / 24 V, 5 blade connections - 2 keys
Version: Operating voltage: 12 V/24 V, With 5 blade terminals (6.3 x 0.8) with 2...
€122,91 €101,58 €111,20 €91,90
 
GRANIT Holder luchtinlaatpijp SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
GRANIT
Holder luchtinlaatpijp SAME, Hürlimann, Deutz-Fahr, Lamborghini
€104,87 €86,67 €99,60 €82,31
 
HELLA Switch inserts with symbols light, green
HELLA
Switch inserts with symbols light, green
Version: Green, light. Colour: grün. To fit: HELLA Schalter Serien 4570 und 7832...
€2,94 €2,43
 
MAHLE Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
38%
MAHLE
Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
€670,19 €553,88 €418,85 €346,16
 
Universal joint 30 x 83 mm, bush lubrication
5%
Universal joint 30 x 83 mm, bush lubrication
A: 30 mm. B: 83 mm. Universal joint size: . Lubrication system: Bush lubrication...
€79,21 €65,46 €75,20 €62,15
 
Gas strut door 750 N, 240 mm SAME, Deutz-Fahr, Lamborghini
Gas strut door 750 N, 240 mm SAME, Deutz-Fahr, Lamborghini
suitable for: Tür. Newtons: 750. A: 240 mm. B: 120 mm. C: 10 mm. D: 10 mm. Form:...
€27,10 €22,40
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 148 mm, 2 grooves
10%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 148 mm, 2 grooves
Refrigerant: R 134a | No. of grooves: 2 | Fixing: EM | Nominal voltage (V): 12 |...
€696,16 €575,34 €629,85 €520,54
 
ROCKINGER Drawbar frame 330/25/32, 2000/3000 kg, 84,3 kN
23%
ROCKINGER
Drawbar frame 330/25/32, 2000/3000 kg, 84,3 kN
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, Lamborghini...
€1.387,39 €1.146,60 €1.062,30 €877,93
 
End plate steering valve 210 bar, 140 x 40 x 104 mm
5%
End plate steering valve 210 bar, 140 x 40 x 104 mm
Description: Diese Endsektion ist zum Abschluss einer Wegeventilkombination erfo...
€348,47 €287,99 €331,00 €273,55
 
FEBI Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
14%
FEBI
Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€115,03 €95,07 €98,75 €81,61
 
Ball joint 330 mm, C M22 x 1,5, D M24 x 1,5, taper 24,6 - 28,5 mm
5%
Ball joint 330 mm, C M22 x 1,5, D M24 x 1,5, taper 24,6 - 28,5 mm
A: 330 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6...
€179,85 €148,64 €170,85 €141,20
 
VICTOR REINZ Cylinder head gasket thickness 1,5 mm, 1 bore engine BF6M1013EC
5%
VICTOR REINZ
Cylinder head gasket thickness 1,5 mm, 1 bore engine BF6M1013EC
€125,38 €103,62 €119,10 €98,43
 
Mekra Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
5%
Mekra
Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€44,83 €37,05 €42,55 €35,17
 
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
5%
LUK
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
Dimensions (mm): 20 x 52 x 15
€34,03 €28,12 €32,30 €26,69
 
GRANIT Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
5%
GRANIT
Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø E: 40 mm.
€45,02 €37,21 €42,75 €35,33
 
GRANIT Oil seal drive shaft SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
GRANIT
Oil seal drive shaft SAME, Hürlimann, Deutz-Fahr, Lamborghini
€127,41 €105,30 €121,00 €100,00
 
GRANIT Oil drain valve M18 x 1,5
5%
GRANIT
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
 
GRANIT Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
GRANIT
Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
Version: Thread M8, M10, Length: 72 mm. Thread: M8 / M10. Length: 72 mm.
€23,25 €19,21
 
Showing 1 - 24 of 203

Deutz-Fahr Agrotron 6.30 parts for cab, hitch and engine

A roof hatch that will no longer stay open, a dead work lamp on the cab roof, or a hitch that has developed play after years of hauling. For the Agrotron 6.30 you will find more than 200 parts here, from GRANIT and from HELLA, Scharmüller, ROCKINGER and PROBOSS.

Cab and driver's seat

The cab takes up a good share of this page. There are gas struts for the roof hatch, HELLA work lamps, standard and wide-angle mirrors, rocker switches for the lights and symbols for the switches. For long days in the seat there are tractor seats, including the Maximo Professional, plus an adapter plate that lets a different seat sit on the existing console.

A tip on gas struts: wherever possible, fit them with the piston rod pointing down. That keeps the internal seal bathed in oil and the strut holds its force longer. Do not wait until the hatch drops shut by itself either. A strut that is noticeably weakening is the first thing to give up on a frosty morning.

Hitch and engine

For towing there are drawbars, top drawbars and Piton Fix units from Scharmüller and ROCKINGER. On the engine side you will find cylinder head gaskets, an intake manifold gasket, V-belts and ball joints for the steering.

When the head gasket is replaced, the block face has to be spotless. Remove old gasket material with a plastic scraper rather than an abrasive disc, so no grit ends up in coolant passages or oil drillings. Check the head with a straightedge. If it has warped, a new gasket will only help for a short while. Look at the V-belts during the same job, and if the flanks are cracked or glazed, replace them while everything is accessible.

Matching parts to the 6.30

The type plate gives the exact model. The Agrotron 6 models look much alike from the outside, so trust the plate rather than the bonnet. For a drawbar, the rail width of the existing bracket is the key measurement, so check it before ordering. For gaskets and belts, take the number from the old part as a reference number and compare it with the product details.

The Deutz-Fahr Agrotron 6.45 from the same range has its own page too. Every other tractor from the make is on Deutz-Fahr parts, which helps if an older Deutz or another Agrotron works alongside the 6.30.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart