Menu
EUR

Deutz-Fahr Agrotron 6.30 tractor parts & technical data

See more than 200 parts for the Deutz-Fahr Agrotron 6.30. The range runs from trailer couplings to lighting and electrics, so the right part is quick to find.

203 parts found for Deutz-Fahr Agrotron 6.30
Show:
Knob green for hydraulics, electronic control
Knob green for hydraulics, electronic control
Version: For hydraulics, electronic control.
€39,40 €32,56
 
Centa Elastic clutch 2x 4 bores, size 28 Deutz-Fahr Agrotron
10%
Centa
Elastic clutch 2x 4 bores, size 28 Deutz-Fahr Agrotron
Version: 2x 4 holes Size 28
€819,36 €677,16 €741,30 €612,64
 
Sealing ring Deutz-Fahr Agrotron 4.70 - 165, K 90 - 610
5%
Sealing ring Deutz-Fahr Agrotron 4.70 - 165, K 90 - 610
€71,34 €58,96 €67,75 €55,99
 
AKS-Dasis Condenser 310 x 580 x 22 mm Deutz-Fahr Agrotron
5%
AKS-Dasis
Condenser 310 x 580 x 22 mm Deutz-Fahr Agrotron
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 | Height (...
€768,76 €635,34 €730,30 €603,55
 
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
23%
HELLA
Alternator CA1433IR 14 V / 95 A without belt pulley
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Wit...
€507,13 €419,12 €388,30 €320,91
 
GRANIT Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
GRANIT
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
Dimensions (mm): 20 x 52 x 15
€11,15 €9,21
 
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
38%
MAHLE
Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dus...
€320,94 €265,24 €200,55 €165,74
 
Elring Valve cover gasket inlet manifold Deutz engine BF6M1013
5%
Elring
Valve cover gasket inlet manifold Deutz engine BF6M1013
€49,38 €40,81 €46,90 €38,76
 
FEBI Fuel filter Ø 77,5 mm, height 125 mm, M16 x 1,5
32%
FEBI
Fuel filter Ø 77,5 mm, height 125 mm, M16 x 1,5
€9,76 €8,07 €6,64 €5,49
 
FEBI Cab filter for C55102 and AF26108
72%
FEBI
Cab filter for C55102 and AF26108
€40,38 €33,37 €11,43 €9,45
 
Gaiter for brake linkage foot brake
5%
Gaiter for brake linkage foot brake
€65,94 €54,50 €62,60 €51,74
 
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
5%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
 
GRANIT Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
5%
GRANIT
Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
€65,62 €54,23 €62,30 €51,49
 
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
5%
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth.
€34,50 €28,51 €32,75 €27,07
 
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.682,20 €1.390,25
 
GRANIT Cylinder head gasket 1,6 mm, 2 bores, Deutz-Fahr Agrotron 100-260
5%
GRANIT
Cylinder head gasket 1,6 mm, 2 bores, Deutz-Fahr Agrotron 100-260
€45,29 €37,43 €43,00 €35,54
 
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
Dimensions: 48 x 5 mm.
€4,28 €3,54
 
GRANIT Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
5%
GRANIT
Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
Version: 12 V, Thread M12 x 1.25.
€55,60 €45,95 €52,80 €43,64
 
Thrust washer set standard Deutz-Fahr
5%
Thrust washer set standard Deutz-Fahr
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E/EC.
€36,72 €30,35 €34,85 €28,80
 
Showing 97 - 120 of 203

Deutz-Fahr Agrotron 6.30 parts for cab, hitch and engine

A roof hatch that will no longer stay open, a dead work lamp on the cab roof, or a hitch that has developed play after years of hauling. For the Agrotron 6.30 you will find more than 200 parts here, from GRANIT and from HELLA, Scharmüller, ROCKINGER and PROBOSS.

Cab and driver's seat

The cab takes up a good share of this page. There are gas struts for the roof hatch, HELLA work lamps, standard and wide-angle mirrors, rocker switches for the lights and symbols for the switches. For long days in the seat there are tractor seats, including the Maximo Professional, plus an adapter plate that lets a different seat sit on the existing console.

A tip on gas struts: wherever possible, fit them with the piston rod pointing down. That keeps the internal seal bathed in oil and the strut holds its force longer. Do not wait until the hatch drops shut by itself either. A strut that is noticeably weakening is the first thing to give up on a frosty morning.

Hitch and engine

For towing there are drawbars, top drawbars and Piton Fix units from Scharmüller and ROCKINGER. On the engine side you will find cylinder head gaskets, an intake manifold gasket, V-belts and ball joints for the steering.

When the head gasket is replaced, the block face has to be spotless. Remove old gasket material with a plastic scraper rather than an abrasive disc, so no grit ends up in coolant passages or oil drillings. Check the head with a straightedge. If it has warped, a new gasket will only help for a short while. Look at the V-belts during the same job, and if the flanks are cracked or glazed, replace them while everything is accessible.

Matching parts to the 6.30

The type plate gives the exact model. The Agrotron 6 models look much alike from the outside, so trust the plate rather than the bonnet. For a drawbar, the rail width of the existing bracket is the key measurement, so check it before ordering. For gaskets and belts, take the number from the old part as a reference number and compare it with the product details.

The Deutz-Fahr Agrotron 6.45 from the same range has its own page too. Every other tractor from the make is on Deutz-Fahr parts, which helps if an older Deutz or another Agrotron works alongside the 6.30.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart