Menu
EUR

Deutz-Fahr Agrotron 6.45 tractor parts & technical data

We have selected more than 200 parts for the Deutz-Fahr Agrotron 6.45. Find trailer couplings, lighting and electrics here without a long search.

213 parts found for Deutz-Fahr Agrotron 6.45
Show:
GRANIT Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
5%
GRANIT
Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø E: 40 mm.
€45,02 €37,21 €42,75 €35,33
 
GRANIT Oil seal drive shaft SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
GRANIT
Oil seal drive shaft SAME, Hürlimann, Deutz-Fahr, Lamborghini
€127,41 €105,30 €121,00 €100,00
 
GRANIT Oil drain valve M18 x 1,5
5%
GRANIT
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
 
GRANIT Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
GRANIT
Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
Version: Thread M8, M10, Length: 72 mm. Thread: M8 / M10. Length: 72 mm.
€23,25 €19,21
 
GRANIT Silencer 6 cylinder 970 mm, Ø 70/96 mm Deutz-Fahr Agrotron
5%
GRANIT
Silencer 6 cylinder 970 mm, Ø 70/96 mm Deutz-Fahr Agrotron
Version: 6 cylinders, Length: 970 mm, Inner Ø top: 70 mm, Inner Ø side: 96 mm.
€1.053,91 €871,00 €1.001,20 €827,44
 
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
23%
ROCKINGER
Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.414,07 €1.168,65 €1.082,75 €894,83
 
Connection cable mirror heating 2-pin, 2000 mm
Connection cable mirror heating 2-pin, 2000 mm
Dimensions: Length = 2000 mm. To fit: Case IH, Deutz, Fendt, JCB, Same.
€34,75 €28,72
 
HELLA Symbol windshield wiper / -nozzle green
HELLA
Symbol windshield wiper / -nozzle green
Version: Green, windscreen wiper/washer. Colour: grün. To fit: HELLA Schalter Se...
€2,88 €2,38
 
HELLA Work lamp flood beam H3 55 / 70 W, 12 / 24 V, 112 x 127 x 97 mm
HELLA
Work lamp flood beam H3 55 / 70 W, 12 / 24 V, 112 x 127 x 97 mm
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plastic, lens: ...
€48,60 €40,17
 
Cobo Rear light left / right 120 x 80 x 56 mm, 12 V
10%
Cobo
Rear light left / right 120 x 80 x 56 mm, 12 V
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: Cable entry via grommet. W...
€35,83 €29,61 €32,40 €26,78
 
GRANIT Lamp glass right, left
GRANIT
Lamp glass right, left
Installation location: Right, left.
€38,80 €32,07
 
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
18%
Walterscheid
Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from t...
€897,82 €742,00 €740,70 €612,15
 
Scharmüller Adapter plate 330 mm rail, guide 32 mm, hole pattern 160 x 100 mm
Scharmüller
Adapter plate 330 mm rail, guide 32 mm, hole pattern 160 x 100 mm
Description: Height adjustable with handle | V-value (kN): 45,6 | Hole pattern (...
€578,40 €478,02
 
GRAMMER Tractor seat Maximo Professional air suspended 530 mm
GRAMMER
Tractor seat Maximo Professional air suspended 530 mm
Track gauge (mm): 260 | Rückenverlängerung: Yes | Lordosenstütze: Mechanical | S...
€3.562,70 €2.944,38
 
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
38%
MAHLE
Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€635,10 €524,88 €396,90 €328,02
 
GRANIT Ball joint, complete right 450 mm, M22 x 1,5, M24 x 1,5
5%
GRANIT
Ball joint, complete right 450 mm, M22 x 1,5, M24 x 1,5
A: 450 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 28 mm. Taper: 24 - 28 ...
€234,43 €193,74 €222,70 €184,05
 
Optibelt V-belt single for engine cooling
Optibelt
V-belt single for engine cooling
€36,70 €30,33
 
GRANIT Exhaust gasket exhaust manifold inner Ø 39 mm, hole spacing 64 mm
GRANIT
Exhaust gasket exhaust manifold inner Ø 39 mm, hole spacing 64 mm
Dimensions: innen Ø 39 mm, Lochabstand 64 mm, Schrauben Ø 10 mm.
€3,65 €3,02
 
Pressure retention valve Deutz-Fahr, Fendt
5%
Pressure retention valve Deutz-Fahr, Fendt
€34,21 €28,27 €32,45 €26,82
 
GRANIT Bolt set 1ste steering valve 3x M8 x 90
GRANIT
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90.
€17,60 €14,55
 
GRANIT Bolt set 2de steering valve 3x M8 x 130
GRANIT
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€14,95 €12,36
 
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric. Seat cont...
€1.825,85 €1.508,97
 
GRANIT Mirror 314 x 228 mm, heated, 12 V, right / left
5%
GRANIT
Mirror 314 x 228 mm, heated, 12 V, right / left
Dimensions: 314 x 228 mm. Height: 314 mm. Width: 228 mm. Radius of curvature: 18...
€256,40 €211,90 €243,55 €201,28
 
Showing 25 - 48 of 213

Deutz-Fahr Agrotron 6.45 parts

Head gaskets, belts, cab struts and hitch parts make up much of what an Agrotron 6.45 needs over the years. More than 200 replacement parts for this tractor are collected on this page, from GRANIT and from HELLA, Scharmüller, ROCKINGER and PROBOSS.

Choosing the head gasket thickness

Cylinder head gaskets for the 6.45 come in different thicknesses, and the right one depends on how far the pistons stand above the block. Look at the old gasket first, as the thickness is often shown by notches or holes along the edge. If the block has been machined or you are unsure, measure piston protrusion with a dial gauge before ordering. Too thin and the pistons can touch the head, too thick and you lose compression.

Elsewhere on the engine there are intake manifold gaskets and V-belts. When changing a belt, check the tensioner and pulleys for wear while you are there.

Cab and visibility

  • Gas struts, for example for the roof window
  • Work lamps and wide-angle mirrors
  • Rocker switches such as the driving light switch, and switch symbols
  • Maximo Professional seats and other tractor seats

When fitting a halogen bulb in a work lamp, keep your fingers off the glass. Skin oil makes that spot run too hot and the bulb fails early. Check the rubber seal on the lamp housing too, as moisture in the reflector dulls the beam. Set a wide-angle mirror while sitting in your normal driving position, so you can see the rear wheels and the lane beside you.

Hitch and steering

For towing there are drawbars, top drawbars, adapter plates and Piton Fix pins. Ball joints keep the steering tight. Play in a joint shows up on the road as constant small corrections at the wheel, so replace it promptly and have the tracking checked.

A drawbar or adapter plate only fits when rail width and hole pattern match the tractor, so measure both first. Torque the adapter plate bolts correctly and check them again after the first hours with a heavy trailer.

Making sure it fits

The rating plate confirms you have an Agrotron 6.45. Work lamps and switches usually carry a HELLA or other maker's number on the housing. For a drawbar, read the plate on the old unit, which shows its dimensions and a reference number. Compare that information with the description on this page.

From the Agrotron line, the Deutz-Fahr Agrotron 6.30 has its own page with the parts for that model. All other tractors of the brand are under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart