Menu
EUR

Deutz-Fahr Agrotron 6.45 tractor parts & technical data

We have selected more than 200 parts for the Deutz-Fahr Agrotron 6.45. Find trailer couplings, lighting and electrics here without a long search.

213 parts found for Deutz-Fahr Agrotron 6.45
Show:
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
5%
GRANIT
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth.
€79,53 €65,73 €75,55 €62,44
 
VICTOR REINZ Exhaust manifold gasket
VICTOR REINZ
Exhaust manifold gasket
€6,30 €5,21
 
VICTOR REINZ Cylinder head gasket thickness 1,7 mm, 3 bores
5%
VICTOR REINZ
Cylinder head gasket thickness 1,7 mm, 3 bores
€125,38 €103,62 €119,10 €98,43
 
VICTOR REINZ Valve stem seal set Ø 9 x 1,5 mm
VICTOR REINZ
Valve stem seal set Ø 9 x 1,5 mm
€37,35 €30,87
 
Thermostat Ø 42 mm, Deutz-Fahr Agrotron 120-260
5%
Thermostat Ø 42 mm, Deutz-Fahr Agrotron 120-260
Ø: 42 mm.
€75,30 €62,23 €71,50 €59,09
 
Optibelt V-belt Deutz-Fahr Agrotron 4.70-6.45
5%
Optibelt
V-belt Deutz-Fahr Agrotron 4.70-6.45
€59,29 €49,00 €56,30 €46,53
 
GRAMMER Tractor seat Maximo Professional Deutz, Deutz-Fahr
GRAMMER
Tractor seat Maximo Professional Deutz, Deutz-Fahr
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric. Seat cont...
€2.531,15 €2.091,86
 
GRANIT Stabilizer SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
GRANIT
Stabilizer SAME, Hürlimann, Deutz-Fahr, Lamborghini
€224,82 €185,80 €213,55 €176,49
 
GRANIT Stabilizer cat. 2, 580 - 620 mm, eye-Ø 25,4 mm, heavy-duty version
5%
GRANIT
Stabilizer cat. 2, 580 - 620 mm, eye-Ø 25,4 mm, heavy-duty version
Eye Ø: 25,4 mm. Description: Schwere Ausführung. Cat.: 2. Technical data: Gabelk...
€1.120,46 €926,00 €1.064,40 €879,67
 
Bush Deutz-Fahr Agrotron
Bush Deutz-Fahr Agrotron
€29,45 €24,34
 
HELLA Rocker switch work lamp, 4 blade connections 6,3 mm
HELLA
Rocker switch work lamp, 4 blade connections 6,3 mm
Version: On/off switch, 4 blade terminals 6.3 mm, Push button switch with bulb. ...
€22,00 €18,18
 
GRANIT Push button switch lift/lower 48 V link voltage, button green
10%
GRANIT
Push button switch lift/lower 48 V link voltage, button green
Version: 48 V switching voltage, Green button, make contact, Total button travel...
€39,21 €32,41 €35,45 €29,30
 
Knob green for hydraulics, electronic control
Knob green for hydraulics, electronic control
Version: For hydraulics, electronic control.
€39,40 €32,56
 
Centa Elastic clutch 2x 4 bores, size 28 Deutz-Fahr Agrotron
10%
Centa
Elastic clutch 2x 4 bores, size 28 Deutz-Fahr Agrotron
Version: 2x 4 holes Size 28
€819,36 €677,16 €741,30 €612,64
 
HELLA Work lamp flood beam Ultra beam H3 65 W, 12 / 24 V
HELLA
Work lamp flood beam Ultra beam H3 65 W, 12 / 24 V
Connection: AMP plug | Power consumption (W): 65 | Bending angle: 15 - 20 | Dime...
€67,95 €56,16
 
Sealing ring Deutz-Fahr Agrotron 4.70 - 165, K 90 - 610
5%
Sealing ring Deutz-Fahr Agrotron 4.70 - 165, K 90 - 610
€71,34 €58,96 €67,75 €55,99
 
AKS-Dasis Condenser 310 x 580 x 22 mm Deutz-Fahr Agrotron
5%
AKS-Dasis
Condenser 310 x 580 x 22 mm Deutz-Fahr Agrotron
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 | Height (...
€768,76 €635,34 €730,30 €603,55
 
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
23%
HELLA
Alternator CA1433IR 14 V / 95 A without belt pulley
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Wit...
€507,13 €419,12 €388,30 €320,91
 
GRANIT Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
GRANIT
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
Dimensions (mm): 20 x 52 x 15
€11,15 €9,21
 
Elring Valve cover gasket inlet manifold Deutz engine BF6M1013
5%
Elring
Valve cover gasket inlet manifold Deutz engine BF6M1013
€49,38 €40,81 €46,90 €38,76
 
FEBI Fuel filter Ø 77,5 mm, height 125 mm, M16 x 1,5
32%
FEBI
Fuel filter Ø 77,5 mm, height 125 mm, M16 x 1,5
€9,76 €8,07 €6,64 €5,49
 
Showing 97 - 120 of 213

Deutz-Fahr Agrotron 6.45 parts

Head gaskets, belts, cab struts and hitch parts make up much of what an Agrotron 6.45 needs over the years. More than 200 replacement parts for this tractor are collected on this page, from GRANIT and from HELLA, Scharmüller, ROCKINGER and PROBOSS.

Choosing the head gasket thickness

Cylinder head gaskets for the 6.45 come in different thicknesses, and the right one depends on how far the pistons stand above the block. Look at the old gasket first, as the thickness is often shown by notches or holes along the edge. If the block has been machined or you are unsure, measure piston protrusion with a dial gauge before ordering. Too thin and the pistons can touch the head, too thick and you lose compression.

Elsewhere on the engine there are intake manifold gaskets and V-belts. When changing a belt, check the tensioner and pulleys for wear while you are there.

Cab and visibility

  • Gas struts, for example for the roof window
  • Work lamps and wide-angle mirrors
  • Rocker switches such as the driving light switch, and switch symbols
  • Maximo Professional seats and other tractor seats

When fitting a halogen bulb in a work lamp, keep your fingers off the glass. Skin oil makes that spot run too hot and the bulb fails early. Check the rubber seal on the lamp housing too, as moisture in the reflector dulls the beam. Set a wide-angle mirror while sitting in your normal driving position, so you can see the rear wheels and the lane beside you.

Hitch and steering

For towing there are drawbars, top drawbars, adapter plates and Piton Fix pins. Ball joints keep the steering tight. Play in a joint shows up on the road as constant small corrections at the wheel, so replace it promptly and have the tracking checked.

A drawbar or adapter plate only fits when rail width and hole pattern match the tractor, so measure both first. Torque the adapter plate bolts correctly and check them again after the first hours with a heavy trailer.

Making sure it fits

The rating plate confirms you have an Agrotron 6.45. Work lamps and switches usually carry a HELLA or other maker's number on the housing. For a drawbar, read the plate on the old unit, which shows its dimensions and a reference number. Compare that information with the description on this page.

From the Agrotron line, the Deutz-Fahr Agrotron 6.30 has its own page with the parts for that model. All other tractors of the brand are under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart