Menu
EUR

Deutz-Fahr Agrotron 6.45 tractor parts & technical data

We have selected more than 200 parts for the Deutz-Fahr Agrotron 6.45. Find trailer couplings, lighting and electrics here without a long search.

213 parts found for Deutz-Fahr Agrotron 6.45
Show:
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
You save 5%
GRANIT Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
€65,62 €54,23 €62,30 €51,49
You save 5%
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth. More
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth.
€34,50 €28,51 €32,75 €27,07
You save 5%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
GRANIT Cylinder head gasket 1,6 mm, 2 bores, Deutz-Fahr Agrotron 100-260
€45,29 €37,43 €43,00 €35,54
You save 5%
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
Dimensions: 48 x 5 mm. More
Dimensions: 48 x 5 mm.
€4,28 €3,54
GRANIT Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
GRANIT
Version: 12 V, Thread M12 x 1.25. More
Version: 12 V, Thread M12 x 1.25.
€55,60 €45,95 €52,80 €43,64
You save 5%
Thrust washer set standard Deutz-Fahr
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E/EC. More
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E...
€36,72 €30,35 €34,85 €28,80
You save 5%
GRANIT Air receiver gasket
€12,40 €10,25
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pulley Ø 102 mm. To fit: Deutz, Lamborghini, Same. More
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pu...
€94,04 €77,72 €89,30 €73,80
You save 5%
GRANIT Hydraulic pump 32 cm³/rpm., 13 splines Deutz-Fahr Agrotron 106-150
GRANIT
Drive shaft: Splined shaft SAE, Ø 21.8 Z13. Direction of rotation: Clockwise. Output volume: 32 cc/rev. More
Drive shaft: Splined shaft SAE, Ø 21.8 Z13. Direction of rotation: Cl...
€1.238,65 €1.023,68
GRANIT Replacement key plastic-coated black, lock number 14644
GRANIT
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: Deutz-Fahr</gt></lt>. More
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: D...
€17,70 €14,63
GRANIT Replacement glass 300 x 214 x 3 mm, can be heated, right / left, 12 V
GRANIT
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation location: Right/left. Volts: 12. Radius of curvature: 1800 mm. More
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation loc...
€70,52 €58,28 €63,80 €52,73
You save 10%
Gas strut hood 450 N, 325 mm Deutz-Fahr Agrotron 4.70-150
Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. To fit: bonnet. Form: 6. More
Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. To fit: bonnet...
€68,63 €56,72 €62,00 €51,24
You save 10%
HELLA Replacement cover orange with optics, test mark E4 6509 ECE
HELLA
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional information: • With pattern. More
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional informati...
€42,40 €35,04
HELLA Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
HELLA
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power consumption: 55 W. Type: Halogen. Light function: Close-range illumination. Additio... More
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power con...
€54,11 €44,72
Stabilus Gas strut roof window 150 N, 235 mm, stroke 81 mm Deutz-Fahr
Stabilus
To fit as: Deutz Roof hatch More
To fit as: Deutz Roof hatch
€28,15 €23,26
HELLA Work lamp flood beam Ultra beam H3 65 W, 12 / 24 V
HELLA
Connection: AMP plug | Power consumption (W): 65 | Bending angle: 15 - 20 | Dimensions W x H x D (mm): 115 x 214 x 97 | Light aperture (mm): □ 83 | ... More
Connection: AMP plug | Power consumption (W): 65 | Bending angle: 15 -...
€67,95 €56,16
Showing 121 - 144 of 213

Deutz-Fahr Agrotron 6.45 parts

Head gaskets, belts, cab struts and hitch parts make up much of what an Agrotron 6.45 needs over the years. More than 200 replacement parts for this tractor are collected on this page, from GRANIT and from HELLA, Scharmüller, ROCKINGER and PROBOSS.

Choosing the head gasket thickness

Cylinder head gaskets for the 6.45 come in different thicknesses, and the right one depends on how far the pistons stand above the block. Look at the old gasket first, as the thickness is often shown by notches or holes along the edge. If the block has been machined or you are unsure, measure piston protrusion with a dial gauge before ordering. Too thin and the pistons can touch the head, too thick and you lose compression.

Elsewhere on the engine there are intake manifold gaskets and V-belts. When changing a belt, check the tensioner and pulleys for wear while you are there.

Cab and visibility

  • Gas struts, for example for the roof window
  • Work lamps and wide-angle mirrors
  • Rocker switches such as the driving light switch, and switch symbols
  • Maximo Professional seats and other tractor seats

When fitting a halogen bulb in a work lamp, keep your fingers off the glass. Skin oil makes that spot run too hot and the bulb fails early. Check the rubber seal on the lamp housing too, as moisture in the reflector dulls the beam. Set a wide-angle mirror while sitting in your normal driving position, so you can see the rear wheels and the lane beside you.

Hitch and steering

For towing there are drawbars, top drawbars, adapter plates and Piton Fix pins. Ball joints keep the steering tight. Play in a joint shows up on the road as constant small corrections at the wheel, so replace it promptly and have the tracking checked.

A drawbar or adapter plate only fits when rail width and hole pattern match the tractor, so measure both first. Torque the adapter plate bolts correctly and check them again after the first hours with a heavy trailer.

Making sure it fits

The rating plate confirms you have an Agrotron 6.45. Work lamps and switches usually carry a HELLA or other maker's number on the housing. For a drawbar, read the plate on the old unit, which shows its dimensions and a reference number. Compare that information with the description on this page.

From the Agrotron line, the Deutz-Fahr Agrotron 6.30 has its own page with the parts for that model. All other tractors of the brand are under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart