Menu
EUR

Deutz-Fahr Agrotron K 120 tractor parts & technical data

We have gathered more than 180 parts for the Deutz-Fahr Agrotron K 120 by model, including trailer couplings, engine parts and electrics for this tractor.

178 parts found for Deutz-Fahr Agrotron K 120
Show:
Optibelt V-belt engine cooling Fendt, Deutz-Fahr
Optibelt
V-belt engine cooling Fendt, Deutz-Fahr
€30,30 €25,04
 
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
5%
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€67,87 €56,09 €64,45 €53,26
 
Thrust washer thickness 2 mm
5%
Thrust washer thickness 2 mm
Dimensions: 2 mm.
€49,09 €40,57 €46,60 €38,51
 
GRAMMER Tractor seat Maximo Professional Deutz, Deutz-Fahr
GRAMMER
Tractor seat Maximo Professional Deutz, Deutz-Fahr
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric. Seat cont...
€2.531,15 €2.091,86
 
Sauermann Drawbar 31 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
10%
Sauermann
Drawbar 31 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 32 ...
€840,76 €694,84 €760,65 €628,64
 
Sauermann Drawbar deep jaw 38 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
10%
Sauermann
Drawbar deep jaw 38 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.003,99 €829,74 €908,35 €750,70
 
Sauermann Drawbar frame Piton 330/26/32, 88,1 kN, 2000/3000 kg, HS 4825-SDF-72
5%
Sauermann
Drawbar frame Piton 330/26/32, 88,1 kN, 2000/3000 kg, HS 4825-SDF-72
Type no.: HS 4825-SDF-72. A: 300 mm. D: 21 mm. D-value: 88,1 kN. Detent pin Ø: 2...
€920,21 €760,50 €874,15 €722,44
 
Sauermann Verstelplaat with handle trailer coupling 330 mm rail width
5%
Sauermann
Verstelplaat with handle trailer coupling 330 mm rail width
€240,79 €199,00 €228,75 €189,05
 
Sealing ring Deutz-Fahr Agrotron 4.70 - 165, K 90 - 610
5%
Sealing ring Deutz-Fahr Agrotron 4.70 - 165, K 90 - 610
€71,34 €58,96 €67,75 €55,99
 
AKS-Dasis Condenser 310 x 580 x 22 mm Deutz-Fahr Agrotron
5%
AKS-Dasis
Condenser 310 x 580 x 22 mm Deutz-Fahr Agrotron
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 | Height (...
€768,76 €635,34 €730,30 €603,55
 
GRANIT Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
GRANIT
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
Dimensions (mm): 20 x 52 x 15
€11,15 €9,21
 
GRANIT Temperature and air pressure sensor Case IH, Deutz-Fahr, Hürlimann, Same
5%
GRANIT
Temperature and air pressure sensor Case IH, Deutz-Fahr, Hürlimann, Same
€33,40 €27,60 €31,70 €26,20
 
FEBI Fuel filter Ø 77,5 mm, height 125 mm, M16 x 1,5
32%
FEBI
Fuel filter Ø 77,5 mm, height 125 mm, M16 x 1,5
€9,76 €8,07 €6,64 €5,49
 
Master brake cylinder piston Ø 23,81 mm mineral oil SAME, Deutz-Fahr
5%
Master brake cylinder piston Ø 23,81 mm mineral oil SAME, Deutz-Fahr
Hole Ø: 23.81 mm. Medium: Mineral oil.
€411,02 €339,69 €390,45 €322,69
 
Gaiter for brake linkage foot brake
5%
Gaiter for brake linkage foot brake
€65,94 €54,50 €62,60 €51,74
 
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
5%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
 
GRANIT Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
5%
GRANIT
Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
€65,62 €54,23 €62,30 €51,49
 
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
5%
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth.
€34,50 €28,51 €32,75 €27,07
 
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.682,20 €1.390,25
 
Engine preheater complete connection Ø 20 mm, hole spacing 40 mm
5%
Engine preheater complete connection Ø 20 mm, hole spacing 40 mm
Connection: Ø 20 mm, 40 mm hole spacing.
€348,70 €288,18 €331,25 €273,76
 
GRANIT Installation cable mini-contact plug 1 m
5%
GRANIT
Installation cable mini-contact plug 1 m
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510.
€163,94 €135,49 €155,70 €128,68
 
Showing 97 - 120 of 178

Parts for the Deutz-Fahr Agrotron K 120

Belts, lights and the seat account for a good share of the work on an Agrotron K 120, together with seals on the engine and hydraulics. This page lists more than 180 new parts for the tractor, made by GRANIT, Walterscheid, ROCKINGER, HELLA and Optibelt.

Belt drive and engine

Multi-rib belts and V-belts are listed, among them the V-belt for the air conditioning. On the engine you will also find valve cover gaskets, front cover gaskets, sealing rings and crankshaft seals, plus starter motors.

Changing the multi-rib belt

Take a photo of the belt routing before the old belt comes off, so the new one goes on right first time. Check the pulleys for rust and worn grooves, and spin the tensioner by hand. If it feels rough or makes noise, replace it now. When the air conditioning V-belt sits in front, renew that one at the same time.

Cab, seat and rear

  • seats such as the PROBOSS and tractor seats such as the Maximo Professional
  • adapter plates for the seat console
  • gas struts for the roof window
  • flood beam work lamps
  • seals for the hydraulic pump
  • automatic drawbars and Piton Fix hitches

How to match a part

The serial plate confirms you have an Agrotron K 120. Belts have their length and profile printed on the back, and starters carry a plate with a reference number. For a seat, the mounting decides: an adapter plate lets a new seat sit on the existing console. Compare each with the product details.

Lights, starting and leaks

Flood beam work lamps light a wide area close to the tractor, which is ideal for hitching up or working around the clamp. Mount them as high and as far out as the bracket allows to cut down shadows from the wheels. If the starter turns slowly or only clicks, measure battery voltage while cranking and check the earth cable first. A leaking hydraulic pump shows up as oil collecting along the flange. Clean everything thoroughly before replacing the seal so no grit gets into the pump. A leak at the crankshaft calls for a new crankshaft seal, often together with the front cover gasket.

Agrotron K series

The Deutz-Fahr Agrotron K 90, Deutz-Fahr Agrotron K 100 and Deutz-Fahr Agrotron K 110 each have their own page with the parts for that model, which helps if a smaller K works alongside the 120. For an Agrotron outside the K series, or an older Deutz-Fahr, go through Deutz-Fahr parts and choose the model.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart