Menu
EUR

Deutz-Fahr Agrotron K 120 tractor parts & technical data

We have gathered more than 180 parts for the Deutz-Fahr Agrotron K 120 by model, including trailer couplings, engine parts and electrics for this tractor.

178 parts found for Deutz-Fahr Agrotron K 120
Show:
GRANIT Filler cap for expansion tank, thread 48 mm
GRANIT
Filler cap for expansion tank, thread 48 mm
Version: Thread: 48 mm, For expansion tank.
€26,40 €21,82
 
GRANIT Piston complete Ø 101 mm, combustion chamber 61,03 mm
5%
GRANIT
Piston complete Ø 101 mm, combustion chamber 61,03 mm
€217,61 €179,84 €206,70 €170,83
 
GRANIT Sealing ring for injection nozzle Ø 13 x 7,3 mm, 1,5 mm thick, copper
GRANIT
Sealing ring for injection nozzle Ø 13 x 7,3 mm, 1,5 mm thick, copper
Outer Ø: 13 mm. Form: A form. Inner Ø: 7,3 mm. Material: copper. Thickness: 1,5 ...
€0,72 €0,60
 
Gasket front cover Fendt, Deutz-Fahr
Gasket front cover Fendt, Deutz-Fahr
€22,10 €18,26
 
GRANIT Connecting rod bush Fendt, Deutz-Fahr
GRANIT
Connecting rod bush Fendt, Deutz-Fahr
€14,50 €11,98
 
Gas strut 900 N, 785 mm, stroke 350 mm
5%
Gas strut 900 N, 785 mm, stroke 350 mm
suitable for: Motorhaube. Newtons: 900. A: 785 mm. B: 390 mm. C: 8 mm. D: 8 mm. ...
€70,60 €58,35 €67,00 €55,37
 
GRANIT Spring fender left SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
GRANIT
Spring fender left SAME, Hürlimann, Deutz-Fahr, Lamborghini
€85,43 €70,60 €81,15 €67,07
 
Filter dryer Ø 63,5 mm, 300 mm, connection thread M10
5%
Filter dryer Ø 63,5 mm, 300 mm, connection thread M10
Connection thread: M10 | Material: Aluminium | Dimensions (mm): - | Outer Ø (mm)...
€46,29 €38,26 €43,95 €36,32
 
VICTOR REINZ Valve cover gasket paper engine BF4M1012
5%
VICTOR REINZ
Valve cover gasket paper engine BF4M1012
€37,99 €31,40 €36,00 €29,75
 
VICTOR REINZ Valve cover gasket steel engine BF4M1012, BF4M2012
5%
VICTOR REINZ
Valve cover gasket steel engine BF4M1012, BF4M2012
€44,23 €36,55 €42,00 €34,71
 
Sleeve water pump Deutz-Fahr
Sleeve water pump Deutz-Fahr
€9,65 €7,98
 
GRANIT Pressure control valve Fendt, Deutz-Fahr
5%
GRANIT
Pressure control valve Fendt, Deutz-Fahr
€149,51 €123,56 €142,00 €117,36
 
Feed pump 2 bores, hole spacing 78 mm, pulley Ø 85 mm
5%
Feed pump 2 bores, hole spacing 78 mm, pulley Ø 85 mm
Version: 2 holes, Hole spacing 78 mm, Pulley Ø 85 mm.
€92,14 €76,15 €87,50 €72,31
 
GRANIT Crankshaft forged Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
GRANIT
Crankshaft forged Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
Notes: Please follow the instructions in the installation guide. Please complete...
€2.071,52 €1.712,00 €1.967,90 €1.626,36
 
GRANIT Connecting rod bearing Ø 63 mm
GRANIT
Connecting rod bearing Ø 63 mm
Dimensions: Ø 63 mm.
€33,25 €27,48
 
Heating flange Hürlimann, Deutz-Fahr, Lamborghini
5%
Heating flange Hürlimann, Deutz-Fahr, Lamborghini
€385,14 €318,30 €365,85 €302,36
 
Holder for operating cable Deutz-Fahr Agrotron
5%
Holder for operating cable Deutz-Fahr Agrotron
€45,54 €37,64 €43,25 €35,74
 
Gas strut door 400 N, 385 mm, stroke 115 mm
5%
Gas strut door 400 N, 385 mm, stroke 115 mm
suitable for: Tür. Newtons: 400. A: 385 mm. B: 195 mm. C: 13 mm. D: 13 mm. Form:...
€71,78 €59,32 €68,15 €56,32
 
Showing 145 - 168 of 178

Parts for the Deutz-Fahr Agrotron K 120

Belts, lights and the seat account for a good share of the work on an Agrotron K 120, together with seals on the engine and hydraulics. This page lists more than 180 new parts for the tractor, made by GRANIT, Walterscheid, ROCKINGER, HELLA and Optibelt.

Belt drive and engine

Multi-rib belts and V-belts are listed, among them the V-belt for the air conditioning. On the engine you will also find valve cover gaskets, front cover gaskets, sealing rings and crankshaft seals, plus starter motors.

Changing the multi-rib belt

Take a photo of the belt routing before the old belt comes off, so the new one goes on right first time. Check the pulleys for rust and worn grooves, and spin the tensioner by hand. If it feels rough or makes noise, replace it now. When the air conditioning V-belt sits in front, renew that one at the same time.

Cab, seat and rear

  • seats such as the PROBOSS and tractor seats such as the Maximo Professional
  • adapter plates for the seat console
  • gas struts for the roof window
  • flood beam work lamps
  • seals for the hydraulic pump
  • automatic drawbars and Piton Fix hitches

How to match a part

The serial plate confirms you have an Agrotron K 120. Belts have their length and profile printed on the back, and starters carry a plate with a reference number. For a seat, the mounting decides: an adapter plate lets a new seat sit on the existing console. Compare each with the product details.

Lights, starting and leaks

Flood beam work lamps light a wide area close to the tractor, which is ideal for hitching up or working around the clamp. Mount them as high and as far out as the bracket allows to cut down shadows from the wheels. If the starter turns slowly or only clicks, measure battery voltage while cranking and check the earth cable first. A leaking hydraulic pump shows up as oil collecting along the flange. Clean everything thoroughly before replacing the seal so no grit gets into the pump. A leak at the crankshaft calls for a new crankshaft seal, often together with the front cover gasket.

Agrotron K series

The Deutz-Fahr Agrotron K 90, Deutz-Fahr Agrotron K 100 and Deutz-Fahr Agrotron K 110 each have their own page with the parts for that model, which helps if a smaller K works alongside the 120. For an Agrotron outside the K series, or an older Deutz-Fahr, go through Deutz-Fahr parts and choose the model.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart