Menu
EUR

Deutz-Fahr Agrotron K 410 tractor parts & technical data

Not sure what fits the Deutz-Fahr Agrotron K 410? This page lists more than 160 parts for the Agrotron K, such as trailer couplings, lighting and electrics.

161 parts found for Deutz-Fahr Agrotron K 410
Show:
GRANIT Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
5%
GRANIT
Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø E: 40 mm.
€45,02 €37,21 €42,75 €35,33
 
GRANIT Hand brake cable SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
GRANIT
Hand brake cable SAME, Hürlimann, Deutz-Fahr, Lamborghini
€96,56 €79,80 €91,70 €75,79
 
GRANIT Oil seal drive shaft SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
GRANIT
Oil seal drive shaft SAME, Hürlimann, Deutz-Fahr, Lamborghini
€127,41 €105,30 €121,00 €100,00
 
GRANIT Oil drain valve M18 x 1,5
5%
GRANIT
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
 
GRANIT Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
GRANIT
Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
Version: Thread M8, M10, Length: 72 mm. Thread: M8 / M10. Length: 72 mm.
€23,25 €19,21
 
Sauermann Drawbar inner part 330 mm, coupling pin 31 mm, 2500 kg
5%
Sauermann
Drawbar inner part 330 mm, coupling pin 31 mm, 2500 kg
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 32 ...
€775,90 €641,24 €737,10 €609,17
 
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
23%
ROCKINGER
Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.414,07 €1.168,65 €1.082,75 €894,83
 
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Glass kit BOND 120 black - 310 ml cartridge
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesi...
€28,25 €23,35
 
Push button switch PTO shaft 48 V link voltage, button yellow, Ø 30 mm
5%
Push button switch PTO shaft 48 V link voltage, button yellow, Ø 30 mm
Version: 48 V switching voltage, Yellow button, make contact, Total button trave...
€37,39 €30,90 €35,50 €29,34
 
HELLA Work lamp flood beam H3 55 / 70 W, 12 / 24 V, 112 x 127 x 97 mm
HELLA
Work lamp flood beam H3 55 / 70 W, 12 / 24 V, 112 x 127 x 97 mm
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plastic, lens: ...
€48,60 €40,17
 
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
18%
Walterscheid
Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from t...
€897,82 €742,00 €740,70 €612,15
 
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sl...
€1.214,60 €1.003,80 €954,30 €788,68
 
GRAMMER Tractor seat Maximo Professional air suspended 530 mm
GRAMMER
Tractor seat Maximo Professional air suspended 530 mm
Track gauge (mm): 260 | Rückenverlängerung: Yes | Lordosenstütze: Mechanical | S...
€3.562,70 €2.944,38
 
ROCKINGER Trailer coupling hitch pin 30,6 mm, rail 330 mm, 2000 kg, black
20%
ROCKINGER
Trailer coupling hitch pin 30,6 mm, rail 330 mm, 2000 kg, black
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 40 mm, DIN ...
€1.079,32 €892,00 €867,75 €717,15
 
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
38%
MAHLE
Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€635,10 €524,88 €396,90 €328,02
 
Pressure retention valve Deutz-Fahr, Fendt
5%
Pressure retention valve Deutz-Fahr, Fendt
€34,21 €28,27 €32,45 €26,82
 
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric. Seat cont...
€1.825,85 €1.508,97
 
Spring fender right SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
Spring fender right SAME, Hürlimann, Deutz-Fahr, Lamborghini
€85,30 €70,50 €81,00 €66,94
 
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
18%
Walterscheid
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
 
HELLA Work lamp flood beam H3, 65 W, 12/24 V, 112 x 127 x 97 mm
HELLA
Work lamp flood beam H3, 65 W, 12/24 V, 112 x 127 x 97 mm
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 112 x 127 x 97 m...
€57,00 €47,11
 
Showing 25 - 48 of 161

Deutz-Fahr Agrotron K 410 parts, from the driver's seat outward

A long day on a Deutz-Fahr Agrotron K 410 goes straight to your back when the seat is worn out. That is why this page starts at the operator's platform. Altogether there are more than 160 parts for the K 410 here, from GRANIT, Walterscheid, ROCKINGER, Sauermann and GRAMMER.

Seating, visibility and lighting

There are several seats for the K 410: a PROBOSS seat, a Maximo Professional tractor seat and air suspended tractor seats. An air suspended seat has its own small compressor, so it needs a power supply in the cab. Check that the connection is there and makes good contact before bolting the new seat down. A gas strut for the roof window, flood beam work lamps and LED main headlights complete the cab.

Under the bonnet

  • V-belt for the air conditioning
  • starter motor
  • fuel feed pump
  • valve cover gasket and front gasket
  • hydraulic pump seals and sealing rings

With a valve cover gasket, clean old residue off the cylinder head face without scratching it and tighten the bolts evenly, working from the centre outward. Check an aircon V-belt for fine cracks on the inside, which only show once you twist the belt slightly.

The feed pump comes with a habit that prevents plenty of starting trouble: bleed the fuel system after every filter change until no more air bubbles appear. Air in the line makes the engine crank for a long time before it fires, which puts needless strain on the starter and the battery. If it still starts reluctantly with the system properly bled, look for corrosion on the starter terminals.

Drawbar and Piton Fix

At the rear there are automatic drawbars in AGCO grey and Piton Fix, among others from Walterscheid and ROCKINGER. If you swap between a tipping trailer and a bale cart a lot, a second insert saves effort.

Finding the matching part

The K 410 belongs to the Agrotron K series. The type plate shows that you really are working on a K 410, and a number on the old part makes comparing it with this page straightforward. With seats, also compare how they mount to the floor.

Each other type in the K series has its own page:

Other Deutz-Fahr series can be found through Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart