Menu
EUR

Deutz-Fahr Agrotron K 410 tractor parts & technical data

Not sure what fits the Deutz-Fahr Agrotron K 410? This page lists more than 160 parts for the Agrotron K, such as trailer couplings, lighting and electrics.

161 parts found for Deutz-Fahr Agrotron K 410
Show:
Feed pump 2 bores, hole spacing 78 mm, pulley Ø 85 mm
Version: 2 holes, Hole spacing 78 mm, Pulley Ø 85 mm. More
Version: 2 holes, Hole spacing 78 mm, Pulley Ø 85 mm.
€92,14 €76,15 €87,50 €72,31
You save 5%
GRANIT Crankshaft forged Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
GRANIT
Notes: Please follow the instructions in the installation guide. Please complete the test instruction report contained therein, and return it to garan... More
Notes: Please follow the instructions in the installation guide. Pleas...
€2.071,52 €1.712,00 €1.967,90 €1.626,36
You save 5%
GRANIT Connecting rod bearing Ø 63 mm
GRANIT
Dimensions: Ø 63 mm. More
Dimensions: Ø 63 mm.
€33,25 €27,48
Heating flange Hürlimann, Deutz-Fahr, Lamborghini
€385,14 €318,30 €365,85 €302,36
You save 5%
Holder for operating cable Deutz-Fahr Agrotron
€45,54 €37,64 €43,25 €35,74
You save 5%
Gas strut door 400 N, 385 mm, stroke 115 mm
suitable for: Tür. Newtons: 400. A: 385 mm. B: 195 mm. C: 13 mm. D: 13 mm. Form: 6. d1: 8 mm. d2: 19 mm. Stroke: 115 mm. To fit: door. More
suitable for: Tür. Newtons: 400. A: 385 mm. B: 195 mm. C: 13 mm. D: 1...
€71,78 €59,32 €68,15 €56,32
You save 5%
Sauermann Ball drawbar ball 80, rail 330 mm, nose weight 3000 kg John Deere
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 31,4 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Sliding bolt. Lock: ba... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 31,4 mm. Load c...
€1.521,39 €1.257,35 €1.445,30 €1.194,46
You save 5%
GRANIT Contact switch safety switch Powershift, Syncrosplit
GRANIT
Version: Powershift, Syncrosplit. More
Version: Powershift, Syncrosplit.
€206,43 €170,60 €196,10 €162,07
You save 5%
Optibelt Multi-rib belt Powerband air pressure system 4 ribs Deutz
€30,10 €24,88
GRANIT Internal plate PTO clutch 2 mm, 38 teeth
GRANIT
Version: thickness = 2 mm 38 teeth More
Version: thickness = 2 mm 38 teeth
€42,93 €35,48 €40,75 €33,68
You save 5%
Elring Seal glow plug
€15,00 €12,40
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VII
GRAMMER
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat supplied with seat contact switch and bracket for your existing control armrest.... More
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat ...
€2.082,30 €1.720,91
KS Connecting rod bearing Ø 63 mm, width 29 mm Fendt, Deutz-Fahr
KS
Dimensions: Ø 63 mm, Width 29 mm. More
Dimensions: Ø 63 mm, Width 29 mm.
€38,35 €31,69
Main bearing Ø 84 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
€36,08 €29,82 €34,25 €28,31
You save 5%
Showing 145 - 161 of 161

Deutz-Fahr Agrotron K 410 parts, from the driver's seat outward

A long day on a Deutz-Fahr Agrotron K 410 goes straight to your back when the seat is worn out. That is why this page starts at the operator's platform. Altogether there are more than 160 parts for the K 410 here, from GRANIT, Walterscheid, ROCKINGER, Sauermann and GRAMMER.

Seating, visibility and lighting

There are several seats for the K 410: a PROBOSS seat, a Maximo Professional tractor seat and air suspended tractor seats. An air suspended seat has its own small compressor, so it needs a power supply in the cab. Check that the connection is there and makes good contact before bolting the new seat down. A gas strut for the roof window, flood beam work lamps and LED main headlights complete the cab.

Under the bonnet

  • V-belt for the air conditioning
  • starter motor
  • fuel feed pump
  • valve cover gasket and front gasket
  • hydraulic pump seals and sealing rings

With a valve cover gasket, clean old residue off the cylinder head face without scratching it and tighten the bolts evenly, working from the centre outward. Check an aircon V-belt for fine cracks on the inside, which only show once you twist the belt slightly.

The feed pump comes with a habit that prevents plenty of starting trouble: bleed the fuel system after every filter change until no more air bubbles appear. Air in the line makes the engine crank for a long time before it fires, which puts needless strain on the starter and the battery. If it still starts reluctantly with the system properly bled, look for corrosion on the starter terminals.

Drawbar and Piton Fix

At the rear there are automatic drawbars in AGCO grey and Piton Fix, among others from Walterscheid and ROCKINGER. If you swap between a tipping trailer and a bale cart a lot, a second insert saves effort.

Finding the matching part

The K 410 belongs to the Agrotron K series. The type plate shows that you really are working on a K 410, and a number on the old part makes comparing it with this page straightforward. With seats, also compare how they mount to the floor.

Each other type in the K series has its own page:

Other Deutz-Fahr series can be found through Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart