Menu
EUR

Deutz-Fahr Agrotron M 410 tractor parts & technical data

Browse more than 140 parts for the Deutz-Fahr Agrotron M 410, from trailer couplings and engine parts to lighting, all selected to fit this tractor model.

119 parts found for Deutz-Fahr Agrotron M 410
Show:
Pressure pipe Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
€117,58 €97,17 €108,17 €89,40
You save 8%
Hydraulic top link cat. 3, 700 - 990 mm, stroke 290 mm, Ø 90 mm
A cat.: 3 / 32. B cat.: 3 / 32. F: 700 / 990 mm. Piston rod Ø D: 45 mm. Cylinder Ø inner E: 90 mm. Lifting force: 11 t. Tensile force: 8 t. Stroke: ... More
A cat.: 3 / 32. B cat.: 3 / 32. F: 700 / 990 mm. Piston rod Ø D: 45 m...
€751,27 €620,88 €691,17 €571,21
You save 8%
Mirror with mirror arm right
Installation location: Right. More
Installation location: Right.
€259,72 €214,64 €238,94 €197,47
You save 8%
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800 kg. D-value: 89,3 kN. Central hole: 95 mm. Hole pattern: 160 x 100 m... More
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.150,89 €951,15 €909,90 €751,99
You save 21%
Oil seal drive shaft SAME, Hürlimann, Deutz-Fahr, Lamborghini
€132,96 €109,88 €122,32 €101,09
You save 8%
Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
Hand brake cable 900 mm, M12 SAME, Hürlimann, Deutz-Fahr, Lamborghini
Length: 900 mm. Thread: M12. Dimensions: Length: 900 mm, Thread M12. More
Length: 900 mm. Thread: M12. Dimensions: Length: 900 mm, Thread M12.
€267,43 €221,02 €246,04 €203,34
You save 8%
Bolt exhaust aftertreatment M8 x 24 mm
Description: M8 x 24 mm. Thread: M8. Length: 24 mm. More
Description: M8 x 24 mm. Thread: M8. Length: 24 mm.
€37,26 €30,80
Control lever EGR valve
Description: For EGR valve. More
Description: For EGR valve.
€20,36 €16,83
Bolt exhaust aftertreatment M8 x 28 mm
Description: M8 x 28 mm. Thread: M8. Length: 28 mm. More
Description: M8 x 28 mm. Thread: M8. Length: 28 mm.
€6,81 €5,63
Cylinder head bolt M12 x 100 mm engine TCD2012L04 4V-TCD6.1L06
Engine types: TCD2012L04 4V, TCD2012L06 4V, TCD2013L06 4V, TCD6.1L06. Dimensions: M12 x 100 mm. More
Engine types: TCD2012L04 4V, TCD2012L06 4V, TCD2013L06 4V, TCD6.1L06. ...
€23,63 €19,52
Heating flange Hürlimann, Deutz-Fahr, Lamborghini
€401,90 €332,15 €369,75 €305,58
You save 8%
Pressure regulator Fendt, SAME, Deutz-Fahr
€139,17 €115,02 €128,04 €105,82
You save 8%
Windshield frame shock absorber or rear window 180 N, 535 mm
suitable for: Frontscheibe oder Heckscheibe. Newtons: 180. A: 535 mm. B: 270 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: windscreen or rear screen. Menke... More
suitable for: Frontscheibe oder Heckscheibe. Newtons: 180. A: 535 mm. ...
€46,34 €38,30 €42,63 €35,23
You save 8%
Gaiter for brake linkage foot brake
€68,06 €56,25 €62,62 €51,75
You save 8%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€63,07 €52,12 €58,02 €47,95
You save 8%
Oil drain valve M18 x 1,5
Thread: M18 x 1.5. More
Thread: M18 x 1.5.
€68,16 €56,33 €62,71 €51,82
You save 8%
Feed pump Lamborghini Mach 200 ST - 250 VRT, R6.100-R6.190
€67,32 €55,64 €61,93 €51,19
You save 8%
Showing 97 - 119 of 119

Deutz-Fahr Agrotron M 410 parts for the hitch, the seat and the fuel system

On an Agrotron M 410 that spends its days behind a tipping trailer or a slurry tanker, wear tends to show up in three places: the rear hitch, the driver seat and the many small seals around the engine. This page gathers more than 140 parts that fit this tractor, supplied by GRANIT, Walterscheid, Scharmüller, ROCKINGER and Sauermann.

Check before you order

Start at the type plate to confirm you are working on an Agrotron M 410. For sensors, seals and injection lines, the number stamped or printed on the old part is your best guide. Compare it with the reference number listed with the product. For hitch components, measure what is fitted now: the rail width of the frame and the pin diameter of the current drawbar tell you more than any part number.

Hitching hardware

For the rear of the tractor there are drawbars, top drawbars, drawbar frames, adapter plates, Piton Fix hooks and a ball hitch. An adapter plate is the piece you need when you want to fit a different coupling system to the existing frame, for example swapping a pin type drawbar for a Piton Fix. Once a new drawbar is in place, operate the locking mechanism a few times and make sure the pin drops fully into its locked position. A pin that only half engages is a classic reason for a trailer coming loose.

Engine and fuel system

Around the engine you will find fuel pressure sensors, injection lines, valve cover gaskets, seals, O-rings, including one for the hydraulic pump, and bolts for the exhaust. When you disconnect an injection line, clean the unions first and cap the open ends straight away. Even a little grit in the injection system can damage the pump and injectors. Fit a new valve cover gasket on a clean surface with no grease on it.

Cab and seating

Inside the cab the focus is on seating and on the gas struts that hold the windows. You can choose complete tractor seats such as the Maximo Professional or seats from the PROBOSS line made for Fendt, Deutz and Deutz-Fahr. If the rear window no longer stays open, the gas strut has usually lost its pressure. Replace both sides together so they push evenly.

The rest of the Agrotron M family

The M 410 is part of the Agrotron M series, and every model in that series has a page of its own. If you run more than one of them, order each machine from its own page: Agrotron M 420, Agrotron M 600, Agrotron M 610, Agrotron M 620, Agrotron M 625 and Agrotron M 650. The full line up of the brand is collected under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart