Menu
EUR

Deutz-Fahr Agrotron TTV 420 tractor parts & technical data

Engine parts, trailer couplings and electrics are among the more than 110 parts listed for the Deutz-Fahr Agrotron TTV 420, all grouped under this one model.

114 parts found for Deutz-Fahr Agrotron TTV 420
Show:
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
5%
GRANIT
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth.
€79,53 €65,73 €75,55 €62,44
 
GRANIT Connecting rod bearing Ø 70 mm
GRANIT
Connecting rod bearing Ø 70 mm
€36,75 €30,37
 
Optibelt Powerband V-belt 8 grooves Fendt, New Holland, Deutz-Fahr
5%
Optibelt
Powerband V-belt 8 grooves Fendt, New Holland, Deutz-Fahr
Ribs: 8 n.
€84,00 €69,42 €79,80 €65,95
 
Injector Hürlimann, Lamborghini, Same
5%
Injector Hürlimann, Lamborghini, Same
€639,18 €528,25 €607,20 €501,82
 
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
5%
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€67,87 €56,09 €64,45 €53,26
 
Sauermann Drawbar 31 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
10%
Sauermann
Drawbar 31 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 32 ...
€840,76 €694,84 €760,65 €628,64
 
Sauermann Drawbar deep jaw 38 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
10%
Sauermann
Drawbar deep jaw 38 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.003,99 €829,74 €908,35 €750,70
 
MAHLE Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil, H/OR
6%
MAHLE
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil, H/OR
Suitable oil: PAG 46 | Refrigerant: R 134a | Pulley Ø (mm): 132 | No. of grooves...
€543,40 €449,09 €509,40 €420,99
 
Ball joint 263 mm, taper 23,5 - 26,5 mm, M20 x 1,5 / M24 x 1,5
5%
Ball joint 263 mm, taper 23,5 - 26,5 mm, M20 x 1,5 / M24 x 1,5
A: 263 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5...
€76,67 €63,36 €72,80 €60,17
 
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.682,20 €1.390,25
 
BOSCH Injection pump engine TCD2012L04 4V, TCD2012L06 4V, TCD4.1L4, TCD6.1L6
12%
BOSCH
Injection pump engine TCD2012L04 4V, TCD2012L06 4V, TCD4.1L4, TCD6.1L6
€461,86 €381,70 €408,46 €337,57
 
GRANIT Adjusting rod EGR valve engine TCD 2012 L06 4V
5%
GRANIT
Adjusting rod EGR valve engine TCD 2012 L06 4V
Description: For EGR valve.
€86,38 €71,39 €82,00 €67,77
 
GRANIT V-belt tensioner Ø 70 mm, width 31 mm
5%
GRANIT
V-belt tensioner Ø 70 mm, width 31 mm
Outer Ø: 70 mm. Width: 31 mm.
€350,96 €290,05 €333,40 €275,54
 
Thermostat Ø 66,5 mm, 87 °C SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
Thermostat Ø 66,5 mm, 87 °C SAME, Hürlimann, Deutz-Fahr, Lamborghini
Ø: 66,5 mm.
€80,84 €66,81 €76,75 €63,43
 
GRANIT Cylinder head bolt M12 x 134 mm engine TCD2012L04 4V-TCD3.6 L04
GRANIT
Cylinder head bolt M12 x 134 mm engine TCD2012L04 4V-TCD3.6 L04
Engine types: TCD2012L04 4V, TCD2012L06 4V, TCD3.6 L04. Dimensions: M12 x 134 mm...
€23,80 €19,67
 
Stud bolt exhaust M8 / M10, 102 mm
Stud bolt exhaust M8 / M10, 102 mm
Thread: M8 / M10. Length: 102 mm. Version: Thread M8 / M10, Length: 102 mm.
€23,80 €19,67
 
GRANIT Cylinder head gasket 1,4 mm, 3 bores engine TCD2012L04 4V
5%
GRANIT
Cylinder head gasket 1,4 mm, 3 bores engine TCD2012L04 4V
€357,59 €295,53 €339,70 €280,74
 
Showing 49 - 72 of 114

Deutz-Fahr Agrotron TTV 420 parts, starting with the fuel system

On a stepless tractor such as the Deutz-Fahr Agrotron TTV 420, an uneven fuel supply shows up straight away in how the machine drives. A leaking injection line, a feed pump that cannot keep up or a rail pressure sensor reporting wrong values, and the engine starts to hunt. That is why the fuel system comes first here. Overall this page has more than 110 parts for the TTV 420, from GRANIT, ROCKINGER, Sauermann, Walterscheid and VICTOR REINZ.

From tank to injector

There are feed pumps, injection lines, O-rings for the injection pump and a sensor kit for rail pressure. Keep this part of the engine as clean as you can and cap off open lines and ports the moment they are disconnected. A speck of dirt in an injector causes more trouble than the leak you set out to fix. Injection lines are formed for one fixed route, so do not bend them to make them fit and never start the union nuts at an angle.

Engine seals and gaskets

From VICTOR REINZ and other makers come valve cover gaskets, front engine gaskets and crankshaft seals, together with individual seals and bolts for the exhaust aftertreatment. Tighten a valve cover in a crosswise pattern and with restraint. Overdoing it distorts the gasket and creates the very leak you were trying to cure.

Cab and hitch points

For the cab there is an aircon compressor, gas struts for the front or rear window and mirrors. At the rear you can fit drawbars, top drawbars and Piton Fix, including parts from ROCKINGER and Walterscheid.

If the aircon compressor has to come out, replace the receiver drier too and flush the lines when the old compressor has failed internally. Metal debris from a broken compressor spreads through the circuit and will otherwise destroy the new one quickly.

Type plate and related models

The TTV 420 belongs to the Deutz-Fahr Agrotron TTV series. Check the type plate before ordering and look for a reference number on the part you are taking off. With gaskets and seals in particular, that number is often the only reliable way to tell two similar looking parts apart.

The other types in the TTV series each have a page of their own:

The full overview for the brand is at Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart