Menu
EUR

Deutz-Fahr Agrotron TTV 430 tractor parts & technical data

Choose from more than 110 parts for the Deutz-Fahr Agrotron TTV 430. Trailer couplings, engine parts and electrics are best represented on this page.

112 parts found for Deutz-Fahr Agrotron TTV 430
Show:
Ball joint 263 mm, taper 23,5 - 26,5 mm, M20 x 1,5 / M24 x 1,5
A: 263 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 263 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€76,67 €63,36 €72,80 €60,17
You save 5%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
GRANIT Oil cooler height 60 mm
GRANIT
Height: 60 mm. More
Height: 60 mm.
€344,51 €284,72 €327,25 €270,45
You save 5%
GRANIT Bleed valve Fendt, Deutz-Fahr
€241,85 €199,88 €229,75 €189,88
You save 5%
Injector Hürlimann, Lamborghini, Same
€639,18 €528,25 €607,20 €501,82
You save 5%
GRANIT Feed pump Lamborghini Mach 200 ST - 250 VRT, R6.100-R6.190
€64,52 €53,32 €61,25 €50,62
You save 5%
Seal Ø 27 x 2,5 mm Fendt, SAME, Deutz-Fahr, Lamborghini
€21,25 €17,56
Sauermann Drawbar 31 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 32 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawbar ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€840,76 €694,84 €760,65 €628,64
You save 10%
Sauermann Drawbar deep jaw 38 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawbar ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.003,99 €829,74 €908,35 €750,70
You save 10%
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
You save 21%
BOSCH Injection pump engine TCD2012L04 4V, TCD2012L06 4V, TCD4.1L4, TCD6.1L6
€461,86 €381,70 €408,46 €337,57
You save 12%
GRANIT V-belt tensioner Ø 70 mm, width 31 mm
GRANIT
Outer Ø: 70 mm. Width: 31 mm. More
Outer Ø: 70 mm. Width: 31 mm.
€350,96 €290,05 €333,40 €275,54
You save 5%
GRANIT Filler cap for expansion tank, thread 48 mm
GRANIT
Version: Thread: 48 mm, For expansion tank. More
Version: Thread: 48 mm, For expansion tank.
€26,40 €21,82
GRANIT Cylinder head bolt M12 x 134 mm engine TCD2012L04 4V-TCD3.6 L04
GRANIT
Engine types: TCD2012L04 4V, TCD2012L06 4V, TCD3.6 L04. Dimensions: M12 x 134 mm. More
Engine types: TCD2012L04 4V, TCD2012L06 4V, TCD3.6 L04. Dimensions: M1...
€23,80 €19,67
Pressure regulator Fendt, SAME, Deutz-Fahr
€133,37 €110,22 €126,70 €104,71
You save 5%
Showing 49 - 72 of 112

Deutz-Fahr Agrotron TTV 430 parts with a focus on fuel injection

Under the bonnet of an Agrotron TTV 430 sits a common rail engine with injection lines, a rail pressure sensor and a feed pump, and that part of the tractor is well covered here. In total, more than 110 parts on this page fit the Deutz-Fahr Agrotron TTV 430.

Fuel and injection

On the fuel side you will find injection lines, O-rings for the injection pump, a feed pump and a rail pressure sensor kit. When the engine drops into limp mode or cuts out, that sensor is one of the first things a mechanic reads out.

Tip for injection work: cleanliness comes first. Clean around a line before loosening it and cap any open connection straight away. A single grain of grit in a common rail system can do more harm than the leak you set out to fix.

Engine gaskets and seals

For the engine itself there is a valve cover gasket, front gaskets, a crankshaft seal and individual seals, some from VICTOR REINZ. The exhaust aftertreatment uses a dedicated bolt that is better not reused once removed. Tighten a new valve cover gasket evenly in a crosswise pattern so it is pressed down equally all round.

If the engine is reluctant to fire after a filter change or a new injection line, there is often air in the low pressure side. The feed pump moves fuel from the tank to the filter and on to the high pressure pump. Bleed the system as the workshop manual describes before cranking for long. When fitting an injection line, make sure it sits without tension and that every clamp goes back on, because a vibrating line can crack.

Cab and hitch

Cab parts include gas struts for the front or rear window, mirrors and an aircon compressor. At the rear, automatic drawbars, top drawbars and Piton Fix units from ROCKINGER, Walterscheid and Sauermann all fit.

The right part and the other TTV models

The type plate shows which TTV you are running. That matters, because from the outside the models look very much alike. For gaskets and sensors, compare the number on the old part with the product details.

These models from the Agrotron TTV series each have a page of their own, useful for contractors running several TTVs:

Other series from the brand, from older tractors to current models, are listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart