Menu
EUR

Deutz-Fahr Agrotron TTV 620 tractor parts & technical data

Browse more than 200 parts for the Deutz-Fahr Agrotron TTV 620 from the Agrotron TTV series, including trailer couplings, lighting and electrics.

225 parts found for Deutz-Fahr Agrotron TTV 620
Show:
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
38%
MAHLE
Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€635,10 €524,88 €396,90 €328,02
 
GRANIT Tensioning pulley Ø 70 / 30 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
GRANIT
Tensioning pulley Ø 70 / 30 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
Outer Ø: 70 mm. Width: 30 mm.
€80,79 €66,77 €76,75 €63,43
 
Seal Ø 18 x 2,5 mm
Seal Ø 18 x 2,5 mm
Ø: 18 x 2,5 mm.
€22,60 €18,68
 
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric. Seat cont...
€1.825,85 €1.508,97
 
GRANIT Repair set polyurethane beglazingskit, Terostat primer - 310 ml
5%
GRANIT
Repair set polyurethane beglazingskit, Terostat primer - 310 ml
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - Wool wiper...
€55,61 €45,96 €52,80 €43,64
 
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
18%
Walterscheid
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
 
HELLA Work lamp flood beam H3, 65 W, 12/24 V, 112 x 127 x 97 mm
HELLA
Work lamp flood beam H3, 65 W, 12/24 V, 112 x 127 x 97 mm
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 112 x 127 x 97 m...
€57,00 €47,11
 
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensio...
€37,00 €30,58
 
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
5%
Sauermann
Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Supplied with individual certification Ø 30 mm pin
€1.073,19 €886,93 €1.019,50 €842,56
 
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin...
€627,55 €518,64
 
Bosch/Rexroth Hydraulic pump 45 cm³ clockwise, 43,5 kg
10%
Bosch/Rexroth
Hydraulic pump 45 cm³ clockwise, 43,5 kg
Output volume (cc/rev): 45 | Direction of rotation: Right
€4.257,86 €3.518,89 €3.852,30 €3.183,72
 
Scharmüller Drawbar frame 59,7 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Scharmüller
Drawbar frame 59,7 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Guide width (mm): 32 | D-value (kN): 59,7 | Version: Prepared for drawbar | Load...
€1.034,55 €855,00
 
GRAMMER Seat contact switches IHC, New Holland, Deutz 125 mm, 4-pin
5%
GRAMMER
Seat contact switches IHC, New Holland, Deutz 125 mm, 4-pin
Sitzoberteil: 721, 722, 731, 741 | Seat contact switch CASE / NEW HOLLAND / DEUT...
€101,91 €84,22 €96,80 €80,00
 
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
GRAMMER
Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Restraint syst...
€2.243,85 €1.854,42
 
Feed pump Deutz-Fahr Agrotron, Hürlimann XL, Same Fortis, Audax
5%
Feed pump Deutz-Fahr Agrotron, Hürlimann XL, Same Fortis, Audax
€222,47 €183,86 €211,30 €174,63
 
Stop solenoid switch Deutz-Fahr
5%
Stop solenoid switch Deutz-Fahr
€408,62 €337,70 €388,15 €320,79
 
Pressure pipe Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
Pressure pipe Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
€112,68 €93,12 €107,00 €88,43
 
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
23%
ROCKINGER
Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.498,36 €1.238,31 €1.147,30 €948,18
 
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
18%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.058,75 €875,00 €873,45 €721,86
 
Scharmüller Drawbar automatic, rail 330 mm, pin Ø 25 mm, 2500 kg, AGCO gray
12%
Scharmüller
Drawbar automatic, rail 330 mm, pin Ø 25 mm, 2500 kg, AGCO gray
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.396,49 €1.154,12 €1.235,00 €1.020,66
 
Showing 49 - 72 of 225

Deutz-Fahr Agrotron TTV 620 parts by job

Parts for an Agrotron TTV 620 tend to be needed in three places: the driver's seat and cab, the engine with its seals, and the hitch at the rear. This page brings together more than 200 parts that fit this tractor, from brands such as GRANIT, HELLA, Sauermann, GRAMMER and PROBOSS.

Hitching at the rear

For trailers there are drawbars, including automatic versions, and the Piton Fix system for heavier work. Before ordering, measure the rail width and the pin thickness of the drawbar currently fitted to your TTV 620 so the new one slides straight into the guide.

Engine, injection and cooling

An oily valve cover usually means the gasket has gone hard. You will find valve cover gaskets here, together with O-rings for the injection pump, injection lines and individual seals, for example for the hydraulic pump. Starter motors, air hoses and the fan clutch complete the engine side.

A workshop tip for the valve cover gasket: clean both the cylinder head face and the cover thoroughly, then tighten the bolts evenly in a crosswise pattern. Overtightening distorts the cover, and a new gasket will leak just like the old one. Never refit a used gasket, even when it still looks reasonable.

Seat, cab and lighting

A worn seat makes long days in the field harder than they need to be. There are complete tractor seats such as the air suspended GRAMMER Maximo Dynamic, plus PROBOSS seats, one of which comes with a seat heater. Flood beam work lamps help when the evenings draw in, a fresh gas strut keeps the roof window open again, and the aircon compressor is available too.

Matching the right part to your tractor

The quickest route is the number on the part you are replacing. Starter motors, gaskets and gas struts often carry a stamped or printed reference number that you can compare in the shop. Also check the type plate on the tractor to be sure you are working on a TTV 620 and not another model from the Agrotron TTV range. If you are unsure about a dimension, hold the old part next to the new one.

Every model has its own page. The smaller tractors in the range are on the pages for the Deutz-Fahr Agrotron TTV 410, the Agrotron TTV 420 and the Agrotron TTV 430, while the closest neighbours are the Agrotron TTV 610 and the Agrotron TTV 630. Always order from the page of your own model, because a part listed for one type does not automatically fit another. Everything else from this manufacturer is collected under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart