Menu
EUR

Deutz-Fahr Agrotron TTV 620 tractor parts & technical data

Browse more than 200 parts for the Deutz-Fahr Agrotron TTV 620 from the Agrotron TTV series, including trailer couplings, lighting and electrics.

225 parts found for Deutz-Fahr Agrotron TTV 620
Show:
GRANIT Silencer Lamborghini, Deutz-Fahr, Hürlimann, Same
€2.072,55 €1.712,85 €1.968,90 €1.627,19
You save 5%
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 520 mm. Joystick console... More
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Sea...
€1.903,30 €1.572,98
Vibration damper SAME, Hürlimann, Deutz-Fahr, Lamborghini
Reference no.: 0.019.0172.0/20. More
Reference no.: 0.019.0172.0/20.
€213,69 €176,60 €203,00 €167,77
You save 5%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.133,29 €936,60 €867,75 €717,15
You save 23%
Sauermann Drawbar 31 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 32 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawbar ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€840,76 €694,84 €760,65 €628,64
You save 10%
Sauermann Drawbar deep jaw 38 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawbar ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.003,99 €829,74 €908,35 €750,70
You save 10%
HELLA Work lamp flood beam H3, 12 / 24 V, 65 W, angular, built-in
HELLA
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 112 x 102 x 94 mm. Protection class: IP5K... More
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plast...
€42,55 €35,17
Sauermann Locking bolt set trailer coupling 330 mm rail width
€205,09 €169,50 €194,80 €160,99
You save 5%
Sauermann Verstelplaat with handle trailer coupling 330 mm rail width
€240,79 €199,00 €228,75 €189,05
You save 5%
GRANIT Expansion valve 3/8 - 5/8 inch o-ring
GRANIT
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connection thread A: # 10, 5/8"" O-ring More
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connectio...
€46,71 €38,60 €44,35 €36,65
You save 5%
Push button switch PTO shaft 48 V, button yellow, Ø 30 mm Agrotron
Version: 48 V switching voltage Yellow button, make contact Total button travel: 5 mm Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustproof and... More
Version: 48 V switching voltage Yellow button, make contact Total butt...
€38,00 €31,41
MAHLE Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 155 cm³
MAHLE
Reference no.: ACP 986 000S | Connection type: Round | Additional information: With sealing ring | For compressor: SD7H15 | Connection: A2 | Fixing: E... More
Reference no.: ACP 986 000S | Connection type: Round | Additional info...
€509,66 €421,21 €318,50 €263,22
You save 38%
MAHLE Alternator 14 V, 200 A, fastening 56 / 10,2 / 90 mm
MAHLE
Form: B | Mounting hole Ø / R (mm): 10,2 / 90,0 | Installation angle (°): l 60 | Nominal voltage (V): 14 | Additional information: Compact alternato... More
Form: B | Mounting hole Ø / R (mm): 10,2 / 90,0 | Installation angle ...
€606,80 €501,49 €379,20 €313,39
You save 38%
HELLA Alternator 14 V, 200 A, without belt pulley
HELLA
Nominal values (V / A): 14 / 200 | Charging current (A): 200 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 200 | Charging current (A): 200 | Nominal...
€710,67 €587,33 €571,35 €472,19
You save 20%
GRANIT Temperature and air pressure sensor Case IH, Deutz-Fahr, Hürlimann, Same
€33,40 €27,60 €31,70 €26,20
You save 5%
FEBI Engine oil filter Ø 83 mm, height 212 mm, with seal
€13,55 €11,20 €7,86 €6,50
You save 42%
FEBI Axial joint 210 mm, Ø 56 mm, M22 x 1,5 / M24 x 1,5
€156,85 €129,63 €52,58 €43,45
You save 66%
GRANIT Input shaft sealing ring 35 x 92/98 x 12/27 mm Carraro front axle 145706
€36,14 €29,87 €34,30 €28,35
You save 5%
Ball joint, complete right and left 414 mm, M20 x 1,5, M22 x 1,5
A: 414 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. Taper: 23,5 - 26,4 mm. More
A: 414 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. T...
€193,59 €159,99 €183,90 €151,98
You save 5%
BOSCH Injection pump engine TCD2012L04 4V, TCD2012L06 4V, TCD4.1L4, TCD6.1L6
€461,86 €381,70 €408,46 €337,57
You save 12%
VICTOR REINZ Valve cover gasket upper
€61,07 €50,47 €58,00 €47,93
You save 5%
Borg Warner Fan clutch SAME, Hürlimann, Deutz-Fahr, Lamborghini
€394,22 €325,80 €346,00 €285,95
You save 12%
GRANIT Exhaust manifold Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
€1.030,30 €851,49 €978,75 €808,88
You save 5%
Showing 121 - 144 of 225

Deutz-Fahr Agrotron TTV 620 parts by job

Parts for an Agrotron TTV 620 tend to be needed in three places: the driver's seat and cab, the engine with its seals, and the hitch at the rear. This page brings together more than 200 parts that fit this tractor, from brands such as GRANIT, HELLA, Sauermann, GRAMMER and PROBOSS.

Hitching at the rear

For trailers there are drawbars, including automatic versions, and the Piton Fix system for heavier work. Before ordering, measure the rail width and the pin thickness of the drawbar currently fitted to your TTV 620 so the new one slides straight into the guide.

Engine, injection and cooling

An oily valve cover usually means the gasket has gone hard. You will find valve cover gaskets here, together with O-rings for the injection pump, injection lines and individual seals, for example for the hydraulic pump. Starter motors, air hoses and the fan clutch complete the engine side.

A workshop tip for the valve cover gasket: clean both the cylinder head face and the cover thoroughly, then tighten the bolts evenly in a crosswise pattern. Overtightening distorts the cover, and a new gasket will leak just like the old one. Never refit a used gasket, even when it still looks reasonable.

Seat, cab and lighting

A worn seat makes long days in the field harder than they need to be. There are complete tractor seats such as the air suspended GRAMMER Maximo Dynamic, plus PROBOSS seats, one of which comes with a seat heater. Flood beam work lamps help when the evenings draw in, a fresh gas strut keeps the roof window open again, and the aircon compressor is available too.

Matching the right part to your tractor

The quickest route is the number on the part you are replacing. Starter motors, gaskets and gas struts often carry a stamped or printed reference number that you can compare in the shop. Also check the type plate on the tractor to be sure you are working on a TTV 620 and not another model from the Agrotron TTV range. If you are unsure about a dimension, hold the old part next to the new one.

Every model has its own page. The smaller tractors in the range are on the pages for the Deutz-Fahr Agrotron TTV 410, the Agrotron TTV 420 and the Agrotron TTV 430, while the closest neighbours are the Agrotron TTV 610 and the Agrotron TTV 630. Always order from the page of your own model, because a part listed for one type does not automatically fit another. Everything else from this manufacturer is collected under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart