Menu
EUR

Deutz-Fahr Agrotron TTV 620 tractor parts & technical data

Browse more than 200 parts for the Deutz-Fahr Agrotron TTV 620 from the Agrotron TTV series, including trailer couplings, lighting and electrics.

225 parts found for Deutz-Fahr Agrotron TTV 620
Show:
HELLA Work lamp flood beam H3, 12 / 24 V, 65 W, angular, built-in
HELLA
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 112 x 102 x 94 mm. Protection class: IP5K... More
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plast...
€42,55 €35,17
HELLA Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
HELLA
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power consumption: 55 W. Type: Halogen. Light function: Close-range illumination. Additio... More
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power con...
€54,11 €44,72
Rear light 12 V, R10W, P21W
Nominal voltage: 12 V. Installation location: Left/right. Bulb: 12V10WK / R10W, 12V21WK / P21W. Form: Rectangular, short sides rounded. Type: Bulb. Ad... More
Nominal voltage: 12 V. Installation location: Left/right. Bulb: 12V10W...
€114,65 €94,75
Stabilus Gas strut door screen 750 N, 250 mm, stroke 80,5 mm, ball socket Deutz-Fahr
Stabilus
To fit as: Deutz Door window More
To fit as: Deutz Door window
€37,41 €30,92 €33,80 €27,93
You save 10%
Stabilus Gas strut roof window 150 N, 235 mm, stroke 81 mm Deutz-Fahr
Stabilus
To fit as: Deutz Roof hatch More
To fit as: Deutz Roof hatch
€28,15 €23,26
HELLA Work lamp flood beam Ultra beam H3 65 W, 12 / 24 V
HELLA
Connection: AMP plug | Power consumption (W): 65 | Bending angle: 15 - 20 | Dimensions W x H x D (mm): 115 x 214 x 97 | Light aperture (mm): □ 83 | ... More
Connection: AMP plug | Power consumption (W): 65 | Bending angle: 15 -...
€67,95 €56,16
Sauermann Locking bolt set trailer coupling 330 mm rail width
€205,09 €169,50 €194,80 €160,99
You save 5%
GRANIT Expansion valve 3/8 - 5/8 inch o-ring
GRANIT
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connection thread A: # 10, 5/8"" O-ring More
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connectio...
€46,71 €38,60 €44,35 €36,65
You save 5%
Push button switch PTO shaft 48 V, button yellow, Ø 30 mm Agrotron
Version: 48 V switching voltage Yellow button, make contact Total button travel: 5 mm Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustproof and... More
Version: 48 V switching voltage Yellow button, make contact Total butt...
€38,00 €31,41
MAHLE Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 155 cm³
MAHLE
Reference no.: ACP 986 000S | Connection type: Round | Additional information: With sealing ring | For compressor: SD7H15 | Connection: A2 | Fixing: E... More
Reference no.: ACP 986 000S | Connection type: Round | Additional info...
€509,66 €421,21 €318,50 €263,22
You save 38%
MAHLE Alternator 14 V, 200 A, fastening 56 / 10,2 / 90 mm
MAHLE
Form: B | Mounting hole Ø / R (mm): 10,2 / 90,0 | Installation angle (°): l 60 | Nominal voltage (V): 14 | Additional information: Compact alternato... More
Form: B | Mounting hole Ø / R (mm): 10,2 / 90,0 | Installation angle ...
€606,80 €501,49 €379,20 €313,39
You save 38%
HELLA Alternator 14 V, 200 A, without belt pulley
HELLA
Nominal values (V / A): 14 / 200 | Charging current (A): 200 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 200 | Charging current (A): 200 | Nominal...
€710,67 €587,33 €571,35 €472,19
You save 20%
GRANIT Temperature and air pressure sensor Case IH, Deutz-Fahr, Hürlimann, Same
€33,40 €27,60 €31,70 €26,20
You save 5%
HELLA Starter motor 12 V, 3,7 kW, 9 teeth, Ø 89 mm, clockwise
€655,00 €541,32 €526,61 €435,21
You save 20%
GRANIT Input shaft sealing ring 35 x 92/98 x 12/27 mm Carraro front axle 145706
€36,14 €29,87 €34,30 €28,35
You save 5%
Ball joint, complete right and left 414 mm, M20 x 1,5, M22 x 1,5
A: 414 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. Taper: 23,5 - 26,4 mm. More
A: 414 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. T...
€193,59 €159,99 €183,90 €151,98
You save 5%
VICTOR REINZ Valve cover gasket upper
€61,07 €50,47 €58,00 €47,93
You save 5%
MANN-FILTER Filter set engine oil, fuel, pre-filter, air, binnenluchtfilter
MANN-FILTER
To fit: Deutz. To fit type: Agrotron M and TTV. Set consisting of: Engine oil filter, Main fuel filter, Fuel pre-filter, Air filter, Secondary element... More
To fit: Deutz. To fit type: Agrotron M and TTV. Set consisting of: Eng...
€337,44 €278,88 €210,90 €174,30
You save 38%
Borg Warner Fan clutch SAME, Hürlimann, Deutz-Fahr, Lamborghini
€394,22 €325,80 €346,00 €285,95
You save 12%
GRANIT Control lever EGR valve
GRANIT
Description: For EGR valve. More
Description: For EGR valve.
€19,50 €16,12
GRANIT Radiator Same, Deutz-Fahr, Lamborghini, Hürlimann 130-175
GRANIT
To fit as: Same Iron, Iron 150/170 Continuo Tier 3, Iron Hi-Line 140/160/175 Tier 3, Iron 130/140/160/175 Tier 3 – Deutz-Fahr Agrotron M 600/610/615... More
To fit as: Same Iron, Iron 150/170 Continuo Tier 3, Iron Hi-Line 140/1...
€1.510,91 €1.248,69 €1.435,35 €1.186,24
You save 5%
Stud bolt exhaust M8 / M10, 102 mm
Thread: M8 / M10. Length: 102 mm. Version: Thread M8 / M10, Length: 102 mm. More
Thread: M8 / M10. Length: 102 mm. Version: Thread M8 / M10, Length: 10...
€23,80 €19,67
Showing 145 - 168 of 225

Deutz-Fahr Agrotron TTV 620 parts by job

Parts for an Agrotron TTV 620 tend to be needed in three places: the driver's seat and cab, the engine with its seals, and the hitch at the rear. This page brings together more than 200 parts that fit this tractor, from brands such as GRANIT, HELLA, Sauermann, GRAMMER and PROBOSS.

Hitching at the rear

For trailers there are drawbars, including automatic versions, and the Piton Fix system for heavier work. Before ordering, measure the rail width and the pin thickness of the drawbar currently fitted to your TTV 620 so the new one slides straight into the guide.

Engine, injection and cooling

An oily valve cover usually means the gasket has gone hard. You will find valve cover gaskets here, together with O-rings for the injection pump, injection lines and individual seals, for example for the hydraulic pump. Starter motors, air hoses and the fan clutch complete the engine side.

A workshop tip for the valve cover gasket: clean both the cylinder head face and the cover thoroughly, then tighten the bolts evenly in a crosswise pattern. Overtightening distorts the cover, and a new gasket will leak just like the old one. Never refit a used gasket, even when it still looks reasonable.

Seat, cab and lighting

A worn seat makes long days in the field harder than they need to be. There are complete tractor seats such as the air suspended GRAMMER Maximo Dynamic, plus PROBOSS seats, one of which comes with a seat heater. Flood beam work lamps help when the evenings draw in, a fresh gas strut keeps the roof window open again, and the aircon compressor is available too.

Matching the right part to your tractor

The quickest route is the number on the part you are replacing. Starter motors, gaskets and gas struts often carry a stamped or printed reference number that you can compare in the shop. Also check the type plate on the tractor to be sure you are working on a TTV 620 and not another model from the Agrotron TTV range. If you are unsure about a dimension, hold the old part next to the new one.

Every model has its own page. The smaller tractors in the range are on the pages for the Deutz-Fahr Agrotron TTV 410, the Agrotron TTV 420 and the Agrotron TTV 430, while the closest neighbours are the Agrotron TTV 610 and the Agrotron TTV 630. Always order from the page of your own model, because a part listed for one type does not automatically fit another. Everything else from this manufacturer is collected under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart