Menu
EUR

Deutz-Fahr Agrotron X720 tractor parts & technical data

Here you will find more than 190 parts for the Deutz-Fahr Agrotron X720, with trailer couplings, lighting and electrics for the Agrotron X series.

184 parts found for Deutz-Fahr Agrotron X720
Show:
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
You save 5%
GRANIT Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
€65,62 €54,23 €62,30 €51,49
You save 5%
GRANIT Idler pulley Same, Fendt, Lamborghini, Deutz-Fahr
€179,87 €148,65 €170,85 €141,20
You save 5%
Injector engine TCD 2013 L06 4V Fendt, SAME, Deutz-Fahr, Lamborghini
€599,18 €495,19 €569,20 €470,41
You save 5%
Thrust washer set standard Deutz-Fahr
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E/EC. More
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E...
€36,72 €30,35 €34,85 €28,80
You save 5%
GRANIT Tank cap with ventilation and lock, thread Ø 60 / 65 mm, collar Ø 65 mm
GRANIT
Thread Ø mm: 60 / 65. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 65. Filler neck Ø: 65 mm.
€36,18 €29,90 €34,35 €28,39
You save 5%
GRANIT Pressure pipe Fendt 922-936, Deutz-Fahr Agrotron X710-X720
€143,74 €118,79 €136,55 €112,85
You save 5%
GRANIT Seal Ø 24 x 2,5 mm Fendt, Deutz-Fahr
GRANIT
Ø: 24 x 2,5 mm. More
Ø: 24 x 2,5 mm.
€22,20 €18,35
GRANIT High-pressure line Fendt 922-936, Deutz-Fahr Agrotron X710-X720
€44,12 €36,46 €41,90 €34,63
You save 5%
Bosch/Rexroth Hydraulic pump 22,5 cm³/rpm., spline-as B 17 x 14, 9 splines Deutz-Fahr
Bosch/Rexroth
Output volume: 22,5 cc/rev. Drive shaft: Splined shaft 17 x 14 9 splines. Operating pressure max.: 220 bar. Direction of rotation: Anticlockwise. Min.... More
Output volume: 22,5 cc/rev. Drive shaft: Splined shaft 17 x 14 9 splin...
€740,22 €611,75 €703,20 €581,16
You save 5%
GRANIT Replacement key plastic-coated black, lock number 14644
GRANIT
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: Deutz-Fahr</gt></lt>. More
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: D...
€17,70 €14,63
HELLA Replacement cover orange with optics, test mark E4 6509 ECE
HELLA
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional information: • With pattern. More
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional informati...
€42,40 €35,04
HELLA Work lamp flood beam H3, 12 / 24 V, 65 W, angular, built-in
HELLA
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 112 x 102 x 94 mm. Protection class: IP5K... More
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plast...
€42,55 €35,17
HELLA Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
HELLA
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power consumption: 55 W. Type: Halogen. Light function: Close-range illumination. Additio... More
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power con...
€54,11 €44,72
Rear light 12 V, R10W, P21W
Nominal voltage: 12 V. Installation location: Left/right. Bulb: 12V10WK / R10W, 12V21WK / P21W. Form: Rectangular, short sides rounded. Type: Bulb. Ad... More
Nominal voltage: 12 V. Installation location: Left/right. Bulb: 12V10W...
€114,65 €94,75
Stabilus Gas strut door screen 750 N, 250 mm, stroke 80,5 mm, ball socket Deutz-Fahr
Stabilus
To fit as: Deutz Door window More
To fit as: Deutz Door window
€37,41 €30,92 €33,80 €27,93
You save 10%
Stabilus Gas strut roof window 150 N, 235 mm, stroke 81 mm Deutz-Fahr
Stabilus
To fit as: Deutz Roof hatch More
To fit as: Deutz Roof hatch
€28,15 €23,26
Walterscheid Adapter plate rail width 322 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking rails. It is prepared fo... More
Description: The coupling plate is a height-adjustable sliding plate t...
€875,06 €723,19 €687,50 €568,18
You save 21%
HELLA Work lamp flood beam Ultra beam H3 65 W, 12 / 24 V
HELLA
Connection: AMP plug | Power consumption (W): 65 | Bending angle: 15 - 20 | Dimensions W x H x D (mm): 115 x 214 x 97 | Light aperture (mm): □ 83 | ... More
Connection: AMP plug | Power consumption (W): 65 | Bending angle: 15 -...
€67,95 €56,16
Sauermann Locking bolt set trailer coupling 330 mm rail width
€205,09 €169,50 €194,80 €160,99
You save 5%
Showing 97 - 120 of 184

Deutz-Fahr Agrotron X720 parts

Lighting for long days

Field work on a Deutz-Fahr Agrotron X720 rarely stops when the sun goes down, which is why lighting is a big part of this page. There are work lamps, including flood beam versions, and LED main headlights. In total more than 190 parts fit this type, from GRANIT and from makers such as HELLA, Walterscheid, ROCKINGER and GRAMMER.

A work lamp that flickers is more often a poor earth connection than a failed lamp. Clean the contact faces and the plug before you replace anything, and check that the switch and fuse can handle the load if you add an extra lamp.

Hitches and couplings

  • Drawbars with automatic locking for the rail
  • Piton Fix and adapter plates for the lower hitch
  • Ball hitches and flange hitches for trailers with either system
  • Trailer couplings for lighter trailers

Do not grease a ball hitch that is designed to run dry. Grease holds dust and grit, which turns into a grinding paste between the ball and the socket. Follow the guidance of the hitch maker.

Engine bay, air conditioning and cab

Under the bonnet you will find aircon compressors, feed pumps, seals for the hydraulic pump and O-rings for the injection pump. In the cab there are air suspended GRAMMER tractor seats, PROBOSS seats with a seat heater and gas struts, for example for the roof window.

When an aircon compressor is replaced, renew the receiver drier as well and have the system evacuated before it is recharged. Moisture left in the circuit is a common reason for a new compressor to fail early.

If diesel weeps from around the injection pump, replace every O-ring at that joint rather than just the one that is visibly leaking. Rubber of the same age tends to fail in quick succession. Keep everything spotless while the system is open, as a single grain of dirt can do more harm to the injection system than the leak itself, and bleed the fuel system before starting the engine.

Confirming the fit

Your type plate should read Agrotron X720. For seals and O-rings, the reference number on the part you take out is the surest check. With an aircon compressor, also compare the number of pulley grooves and the position of the connections. Drawbars are chosen by the hole pattern of the rail on your tractor.

Every other tractor from the brand has its own page with matching parts, reachable through Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart