Menu
EUR

Deutz-Fahr Agrotron X720 tractor parts & technical data

Here you will find more than 190 parts for the Deutz-Fahr Agrotron X720, with trailer couplings, lighting and electrics for the Agrotron X series.

184 parts found for Deutz-Fahr Agrotron X720
Show:
HELLA Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
HELLA
Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power consumption: ...
€54,11 €44,72
 
Rear light 12 V, R10W, P21W
Rear light 12 V, R10W, P21W
Nominal voltage: 12 V. Installation location: Left/right. Bulb: 12V10WK / R10W, ...
€114,65 €94,75
 
Stabilus Gas strut door screen 750 N, 250 mm, stroke 80,5 mm, ball socket Deutz-Fahr
10%
Stabilus
Gas strut door screen 750 N, 250 mm, stroke 80,5 mm, ball socket Deutz-Fahr
To fit as: Deutz Door window
€37,41 €30,92 €33,80 €27,93
 
Stabilus Gas strut roof window 150 N, 235 mm, stroke 81 mm Deutz-Fahr
Stabilus
Gas strut roof window 150 N, 235 mm, stroke 81 mm Deutz-Fahr
To fit as: Deutz Roof hatch
€28,15 €23,26
 
Walterscheid Adapter plate rail width 322 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 322 mm, hole pattern 160 x 100 mm, M21
Description: The coupling plate is a height-adjustable sliding plate that can on...
€875,06 €723,19 €687,50 €568,18
 
Sauermann Locking bolt set trailer coupling 330 mm rail width
5%
Sauermann
Locking bolt set trailer coupling 330 mm rail width
€205,09 €169,50 €194,80 €160,99
 
GRANIT Expansion valve 3/8 - 5/8 inch o-ring
5%
GRANIT
Expansion valve 3/8 - 5/8 inch o-ring
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connection thread A...
€46,71 €38,60 €44,35 €36,65
 
MAHLE Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 155 cm³
38%
MAHLE
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 155 cm³
Reference no.: ACP 986 000S | Connection type: Round | Additional information: W...
€509,66 €421,21 €318,50 €263,22
 
HELLA Alternator 14 V, 200 A, without belt pulley
20%
HELLA
Alternator 14 V, 200 A, without belt pulley
Nominal values (V / A): 14 / 200 | Charging current (A): 200 | Nominal voltage (...
€710,67 €587,33 €571,35 €472,19
 
MAHLE Gear reduction starter 12 V, 4,2 kW, 12 teeth, clockwise, Ø 89 mm
38%
MAHLE
Gear reduction starter 12 V, 4,2 kW, 12 teeth, clockwise, Ø 89 mm
€430,61 €355,88 €269,10 €222,40
 
Shim 5 mm thick Deutz-Fahr, Lamborghini, Same
5%
Shim 5 mm thick Deutz-Fahr, Lamborghini, Same
€134,55 €111,20 €127,80 €105,62
 
VICTOR REINZ Valve cover gasket engine TCD2013 L06
5%
VICTOR REINZ
Valve cover gasket engine TCD2013 L06
€67,88 €56,10 €64,45 €53,26
 
EGR valve Deutz-Fahr, Fendt, Same, Lamborghini
5%
EGR valve Deutz-Fahr, Fendt, Same, Lamborghini
€703,65 €581,53 €668,45 €552,44
 
GRANIT Control lever EGR valve
GRANIT
Control lever EGR valve
Description: For EGR valve.
€19,50 €16,12
 
GRANIT Exhaust manifold gasket to turbo Fendt, SAME, Deutz-Fahr
5%
GRANIT
Exhaust manifold gasket to turbo Fendt, SAME, Deutz-Fahr
€33,72 €27,87 €32,00 €26,45
 
GRANIT Crankshaft seal rear Ø 130 x 150 x 13 mm FPM FPM
5%
GRANIT
Crankshaft seal rear Ø 130 x 150 x 13 mm FPM FPM
Outer Ø: 150 mm. Width: 13 mm. Inner Ø: 130 mm. Material: FPM (fluoro rubber).
€49,25 €40,70 €46,75 €38,64
 
GRANIT Crankshaft seal for Ø 81 x 104 x 11 mm FPM FPM
5%
GRANIT
Crankshaft seal for Ø 81 x 104 x 11 mm FPM FPM
Outer Ø: 104 mm. Width: 11 mm. Inner Ø: 81 mm. Material: FPM (fluoro rubber).
€39,13 €32,34 €37,15 €30,70
 
GRANIT High-pressure pump Fendt 922-936, Deutz-Fahr Agrotron X710-X720
5%
GRANIT
High-pressure pump Fendt 922-936, Deutz-Fahr Agrotron X710-X720
€851,84 €704,00 €809,20 €668,76
 
Pressure regulator Fendt, SAME, Deutz-Fahr
5%
Pressure regulator Fendt, SAME, Deutz-Fahr
€133,37 €110,22 €126,70 €104,71
 
GRANIT Feed pump Deutz-Fahr Agrotron X 710, X 720, Fendt 922-930
5%
GRANIT
Feed pump Deutz-Fahr Agrotron X 710, X 720, Fendt 922-930
€239,17 €197,66 €227,20 €187,77
 
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741 Fendt, Deutz, Deutz-Fahr
GRAMMER
Tractor seat Maximo Dynamic DDS MSG95AL/741 Fendt, Deutz, Deutz-Fahr
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric. Seat cont...
€3.569,60 €2.950,08
 
Showing 121 - 144 of 184

Deutz-Fahr Agrotron X720 parts

Lighting for long days

Field work on a Deutz-Fahr Agrotron X720 rarely stops when the sun goes down, which is why lighting is a big part of this page. There are work lamps, including flood beam versions, and LED main headlights. In total more than 190 parts fit this type, from GRANIT and from makers such as HELLA, Walterscheid, ROCKINGER and GRAMMER.

A work lamp that flickers is more often a poor earth connection than a failed lamp. Clean the contact faces and the plug before you replace anything, and check that the switch and fuse can handle the load if you add an extra lamp.

Hitches and couplings

  • Drawbars with automatic locking for the rail
  • Piton Fix and adapter plates for the lower hitch
  • Ball hitches and flange hitches for trailers with either system
  • Trailer couplings for lighter trailers

Do not grease a ball hitch that is designed to run dry. Grease holds dust and grit, which turns into a grinding paste between the ball and the socket. Follow the guidance of the hitch maker.

Engine bay, air conditioning and cab

Under the bonnet you will find aircon compressors, feed pumps, seals for the hydraulic pump and O-rings for the injection pump. In the cab there are air suspended GRAMMER tractor seats, PROBOSS seats with a seat heater and gas struts, for example for the roof window.

When an aircon compressor is replaced, renew the receiver drier as well and have the system evacuated before it is recharged. Moisture left in the circuit is a common reason for a new compressor to fail early.

If diesel weeps from around the injection pump, replace every O-ring at that joint rather than just the one that is visibly leaking. Rubber of the same age tends to fail in quick succession. Keep everything spotless while the system is open, as a single grain of dirt can do more harm to the injection system than the leak itself, and bleed the fuel system before starting the engine.

Confirming the fit

Your type plate should read Agrotron X720. For seals and O-rings, the reference number on the part you take out is the surest check. With an aircon compressor, also compare the number of pulley grooves and the position of the connections. Drawbars are chosen by the hole pattern of the rail on your tractor.

Every other tractor from the brand has its own page with matching parts, reachable through Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart