Menu
EUR

Tractor parts Deutz-Fahr AgroXtra 4.47

Looking for parts for your Deutz-Fahr AgroXtra 4.47 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

355 parts found for Deutz-Fahr AgroXtra 4.47
Show:
GRANIT Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
GRANIT
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal. More
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€10,65 €8,80
HELLA Glass rear light right, 4 light functions, with red spare lens
HELLA
To fit as: Deutz-Fahr DX 3 V/F/S 3.10, 3.30, 3.50, 3.70, 3.90, DX 4.10, 4.30, 4.50, 4.70, 6.05, 6.10, 6.30, 6.50, 7.10, DX 3.10SC, 3.30, 3.50, 3.60, 3... More
To fit as: Deutz-Fahr DX 3 V/F/S 3.10, 3.30, 3.50, 3.70, 3.90, DX 4.10...
€18,00 €14,88
Stabilus Gas strut door 300 N, 505 mm, ball socket 8 mm Deutz-Fahr
Stabilus
To fit as: Deutz door More
To fit as: Deutz door
€78,89 €65,20 €74,90 €61,90
You save 5%
Shim 0,2 mm, inner-Ø 110,1 mm, outer-Ø 117,6 mm Fendt F 231 GT
To fit as: Fendt F 231 GT from serial no. 16774 More
To fit as: Fendt F 231 GT from serial no. 16774
€2,71 €2,24
GRANIT Control unit 220 bar, 40 l/min, 220 x Ø 57,9 mm Deutz-Fahr
GRANIT
Max. operating pressure: 220 bar Nominal flow rate: max. 40 l/min. Tightening torque: 25 Nm Dimensions: 220 x Ø 57.9 mm More
Max. operating pressure: 220 bar Nominal flow rate: max. 40 l/min. Tig...
€618,91 €511,50 €587,95 €485,91
You save 5%
Scharmüller Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
Scharmüller
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota grey | Guide width (mm): 32 | Load capacity (kg): 1500 | Category: Bearing support... More
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota gr...
€1.327,65 €1.097,23
Scharmüller Drawbar frame 55,4 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Scharmüller
D-value (kN): 55,4 | Version: Prepared for drawbar | Category: Bearing supports | Load capacity (kg): 2000 | Rail width (mm): 330 | Guide width (mm): ... More
D-value (kN): 55,4 | Version: Prepared for drawbar | Category: Bearing...
€1.161,10 €959,59
Scharmüller Clutch complete type 1120 coupling pin 38 mm, nose weight 1250 kg
Scharmüller
Hole (mm): M20 | Overhang (mm): 211 | Thread: M20 | Lock: Automatic | Internal width (mm): 98 | Colour: Black | Hole spacing (mm): 129 | D-value (kN):... More
Hole (mm): M20 | Overhang (mm): 211 | Thread: M20 | Lock: Automatic | ...
€1.379,76 €1.140,30 €1.162,15 €960,45
You save 16%
MAHLE Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
MAHLE
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additional information: Dust-tight | Installation angle (°): l 60 | Mounting L / d / R... More
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additio...
€312,95 €258,64 €195,55 €161,61
You save 38%
Clutch plate 310, 31 x 36 mm, 16 splines Deutz-Fahr
Additional information: Made in Germany | Dimensions (mm): 31 x 36, 16 grooves More
Additional information: Made in Germany | Dimensions (mm): 31 x 36, 16...
€190,80 €157,69 €181,25 €149,79
You save 5%
GRANIT Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
GRANIT
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€11,15 €9,21
GRANIT Clutch kit organic clutch plate Deutz-Fahr
GRANIT
Contents: Clutch (445K88052034), organic disc (445S64452041), release bearing (44504080), release bearing (44504079) More
Contents: Clutch (445K88052034), organic disc (445S64452041), release ...
€1.123,05 €928,14 €1.066,85 €881,69
You save 5%
MAHLE Alternator 14 V, 55 A, flange 56 mm Deutz-Fahr, Fendt
MAHLE
Direction of rotation: ↻ | Belt width (mm) / type: - | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Pulley Ø (mm): - | Nominal voltage (V): 14 | Mo... More
Direction of rotation: ↻ | Belt width (mm) / type: - | Mounting L / ...
€306,60 €253,39 €191,60 €158,35
You save 38%
Alternator 14 V, 55 A, flange 56 mm, Deutz-Fahr, Fendt
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values (V / A): 14 / 55 | Flange size (mm): 56,0 | Installation angle (°): l 60 | Pull... More
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values ...
€154,84 €127,97 €147,00 €121,49
You save 5%
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VII
GRAMMER
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat supplied with seat contact switch and bracket for your existing control armrest.... More
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat ...
€2.082,30 €1.720,91
GRANIT Fixed caliper, complete without brake lining Knott bottom left, DOT 4
€714,75 €590,70 €679,00 €561,16
You save 5%
Brake drum / disc right inner-Ø 180 mm, disc-Ø 276 mm
€565,43 €467,30 €537,15 €443,93
You save 5%
GRANIT PTO shaft end piece 335 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
GRANIT
Version: Length 335 mm, 1 3/8", 6 grooves, For 540 rpm. More
Version: Length 335 mm, 1 3/8", 6 grooves, For 540 rpm.
€488,08 €403,37 €463,65 €383,18
You save 5%
VICTOR REINZ Cylinder head gasket thickness 1,4 mm, Ø 102,6 mm engine FL912, FL913 Deutz
VICTOR REINZ
Engine types: FL912, FL913, BFL912, BFL913. More
Engine types: FL912, FL913, BFL912, BFL913.
€17,55 €14,50
GRANIT V-belt AV 13 x 1000 mm - 2 pieces
GRANIT
Dimensions: AV 13 x 1000 mm. More
Dimensions: AV 13 x 1000 mm.
€19,90 €16,45
V-belt Deutz-Fahr DX 4.70-6.05, AgroPrima 4.51-6.16
€39,74 €32,84 €37,75 €31,20
You save 5%
GRANIT Valve spring engine F2L912-F6L913, BF6L913 Deutz-Fahr, Fendt
GRANIT
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€11,45 €9,46
Showing 313 - 336 of 355

Parts for your Deutz-Fahr AgroXtra 4.47 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr AgroXtra 4.47. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr AgroXtra 4.47. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr AgroXtra 4.47. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart