Menu
EUR

Deutz-Fahr AgroXtra 4.57 tractor parts & technical data

We carry more than 350 parts for the Deutz-Fahr AgroXtra 4.57. Work through the trailer couplings, electrics and lighting groups to find what fits your tractor.

350 parts found for Deutz-Fahr AgroXtra 4.57
Show:
Scharmüller Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
Scharmüller
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 330 | Detent pin Ø (mm): 25 | Load capacity (kg): 3000 | Colour: Kubota grey | Gu... More
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 33...
€1.241,26 €1.025,83
Scharmüller Drawbar frame 43,2 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Scharmüller
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (kg): 2000 | Guide width (mm): 32 | Rail width (mm): 330 | Version: Prepared for d... More
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (k...
€1.034,55 €855,00
Scharmüller Drawbar frame 55,4 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Scharmüller
D-value (kN): 55,4 | Version: Prepared for drawbar | Category: Bearing supports | Load capacity (kg): 2000 | Rail width (mm): 330 | Guide width (mm): ... More
D-value (kN): 55,4 | Version: Prepared for drawbar | Category: Bearing...
€1.161,10 €959,59
Scharmüller Clutch complete type 1120 coupling pin 38 mm, nose weight 1250 kg
Scharmüller
Hole (mm): M20 | Overhang (mm): 211 | Thread: M20 | Lock: Automatic | Internal width (mm): 98 | Colour: Black | Hole spacing (mm): 129 | D-value (kN):... More
Hole (mm): M20 | Overhang (mm): 211 | Thread: M20 | Lock: Automatic | ...
€1.379,76 €1.140,30 €1.162,15 €960,45
You save 16%
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
MAHLE
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation angle (°): l + r 60 | Belt width (mm) / type: - | Direction of rot... More
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | ...
€448,64 €370,78 €280,40 €231,74
You save 38%
Clutch cable driving clutch 1285 mm, sleeve 955 mm, M8, M12 Deutz-Fahr
Sleeve length (mm): 955 | Cable length (mm): 1285 | Thread: M08, M12 More
Sleeve length (mm): 955 | Cable length (mm): 1285 | Thread: M08, M12
€87,68 €72,46 €83,25 €68,80
You save 5%
LUK Thrust bearing driving clutch 65 x 96 x 23 mm
LUK
Dimensions (mm): 65 x 96 x 23 More
Dimensions (mm): 65 x 96 x 23
€155,61 €128,60 €147,80 €122,15
You save 5%
GRANIT Double clutch DuT 310 41 x 45 mm, 21 splines Deutz-Fahr
GRANIT
Contents: 445K88052034AT | Flywheel dimension (mm): 3 (erhöht) | web (mm): 79 | Dimensions (mm): 41 x 45, 21 grooves | Additional information: Made i... More
Contents: 445K88052034AT | Flywheel dimension (mm): 3 (erhöht) | web ...
€822,20 €679,50 €781,00 €645,45
You save 5%
GRANIT Alternator 14 V, 65 A, flange 56 mm, pulley Ø 73 mm
GRANIT
Additional information: With W connection | Charging current (A): 65 | Belt width (mm) / type: 9,7 | Installation angle (°): l + r 60 | Nominal volta... More
Additional information: With W connection | Charging current (A): 65 |...
€138,17 €114,19 €131,25 €108,47
You save 5%
LUK Pilot bearing 20 x 52 x 15 mm
LUK
Dimensions: 20 x 52 x 15 mm. More
Dimensions: 20 x 52 x 15 mm.
€34,18 €28,25 €32,45 €26,82
You save 5%
Knott Industrietechnik Tension spring brake lining 89 mm, thread-Ø 2 mm, outer-Ø 10 mm Deutz-Fahr
Knott Industrietechnik
Length: 83,5 mm mm. Wire thickness: 2 mm mm. More
Length: 83,5 mm mm. Wire thickness: 2 mm mm.
€4,53 €3,74
Knott Industrietechnik Brake shoe 254 x 70 mm Deutz-Fahr, Case IH
€341,46 €282,20 €324,35 €268,06
You save 5%
GRANIT Seal kit foot brake Deutz-Fahr
€46,89 €38,75 €44,50 €36,78
You save 5%
PTO shaft end piece 299 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
Version: Length 299 mm, 1 3/8", 6 splines, for 540 rpm. More
Version: Length 299 mm, 1 3/8", 6 splines, for 540 rpm.
€447,82 €370,10 €425,40 €351,57
You save 5%
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
GRANIT
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€79,53 €65,73 €75,55 €62,44
You save 5%
GRANIT Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€14,30 €11,82
Shim 1,5 mm liner Top, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,5 mm. More
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,5 mm.
€12,80 €10,58
Shim liner Top 1,2 mm, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,2 mm. More
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,2 mm.
€9,90 €8,18
O-ring oil pump 14,5 x 3 mm Fendt, Renault, Deutz-Fahr
Dimensions: 14.5 x 3 mm. More
Dimensions: 14.5 x 3 mm.
€7,90 €6,53
Turbocharger mounting kit Deutz-Fahr AgroPrima, AgroXtra, DX, Hopfen
Contents: 1x turbine inlet gasket, 1x turbine outlet gasket, 1x oil inlet gasket, 1x oil outlet gasket, 4x copper-plated nuts, 4x stud bolts. More
Contents: 1x turbine inlet gasket, 1x turbine outlet gasket, 1x oil in...
€109,52 €90,51 €104,00 €85,95
You save 5%
GRANIT Connecting rod bush Ø 35 mm Fendt, Deutz-Fahr
GRANIT
Dimensions: Ø 35 mm. More
Dimensions: Ø 35 mm.
€8,90 €7,36
Showing 169 - 192 of 350

Deutz-Fahr AgroXtra 4.57 parts for the big jobs and the small ones

An AgroXtra 4.57 kept in daily work will eventually need its engine, clutch or brakes going through. This page brings together more than 350 parts that fit the Deutz-Fahr AgroXtra 4.57, with brands such as VICTOR REINZ, LUK, ROCKINGER, HELLA and GRANIT, so a rebuild can be planned in one go.

Brakes and linkage

Fixed calipers are available for the brakes. After fitting one, bleed the system and check that the brake frees off completely when released, as a dragging caliper overheats quickly. For the linkage there are lift shaft sealing rings for the left and right side.

Engine rebuild

Cylinder liner shims, crankshaft seals, exhaust gaskets, further seals and a repair set for the feed pump cover the engine. Shims set how far each liner stands proud of the block. Measure that protrusion at several points around the liner once it is fitted. If it is out, even a brand new head gasket will not seal reliably.

When fitting a crankshaft seal, avoid running the new lip on the exact groove the old one wore into the shaft. Oil the lip lightly and press the seal in squarely. A dry lip on a worn track will start leaking again before long.

Clutch

Clutch kits and thrust bearings, from LUK among others, cover the clutch. Always fit a new thrust bearing with a new clutch. Splitting the tractor a second time for one bearing is a job nobody wants. With the clutch out, inspect the flywheel for scoring and heat cracks.

Electrics and cab

Starter motors, alternators and a V-belt handle starting and charging, and a push button switch controls the work lamps. Check the tension of a new V-belt again after the first hours of running, since a new belt stretches slightly as it beds in. In the cab there are tractor seats and gas struts for the door and windows.

Matching parts to your AgroXtra 4.57

Start with the rating plate to be sure the tractor is an AgroXtra 4.57. Seals often carry their size moulded on the ring itself, while starters and alternators have a reference number on the housing. That number is the fastest way to match an old part with one on this page.

The Deutz-Fahr AgroXtra 6.07 from the same range has its own page. If you run both, order for each type separately. All other tractors from the make are listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart