Menu
EUR

Deutz-Fahr AgroXtra 4.57 tractor parts & technical data

We carry more than 350 parts for the Deutz-Fahr AgroXtra 4.57. Work through the trailer couplings, electrics and lighting groups to find what fits your tractor.

350 parts found for Deutz-Fahr AgroXtra 4.57
Show:
GRANIT Fixed caliper, complete without brake lining Knott top right, DOT 4
5%
GRANIT
Fixed caliper, complete without brake lining Knott top right, DOT 4
€751,14 €620,78 €713,55 €589,71
 
VICTOR REINZ Cylinder head gasket thickness 1,3 mm, Ø 102,6 mm engine FL912, FL913 Deutz
VICTOR REINZ
Cylinder head gasket thickness 1,3 mm, Ø 102,6 mm engine FL912, FL913 Deutz
Engine types: FL912, FL913, BFL912, BFL913. Outer Ø: 120 mm. Inner Ø: 102,6 mm. ...
€12,40 €10,25
 
GRANIT V-belt AV 13 x 1000 mm - 2 pieces
GRANIT
V-belt AV 13 x 1000 mm - 2 pieces
Dimensions: AV 13 x 1000 mm.
€19,90 €16,45
 
O-ring hydraulic pump
O-ring hydraulic pump
€4,54 €3,75
 
Push button switch main headlights upper 12/24 V, button yellow, Ø 30 mm
5%
Push button switch main headlights upper 12/24 V, button yellow, Ø 30 mm
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8...
€38,12 €31,50 €36,20 €29,92
 
GRANIT Elastic clutch chain pitch Ø 80 mm, 6x bore Ø 12 mm Deutz-Fahr
5%
GRANIT
Elastic clutch chain pitch Ø 80 mm, 6x bore Ø 12 mm Deutz-Fahr
Version: PCD: 80 mm, 6x hole Ø 12 mm
€458,30 €378,76 €435,35 €359,79
 
GRANIT Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
5%
GRANIT
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ring | Dimens...
€62,65 €51,78 €59,50 €49,17
 
GRANIT Fixed caliper, complete without brake lining Knott bottom left, DOT 4
5%
GRANIT
Fixed caliper, complete without brake lining Knott bottom left, DOT 4
€714,75 €590,70 €679,00 €561,16
 
Brake drum / disc right inner-Ø 180 mm, disc-Ø 276 mm
5%
Brake drum / disc right inner-Ø 180 mm, disc-Ø 276 mm
Menke no.: 68293.
€565,43 €467,30 €537,15 €443,93
 
Windshield frame shock absorber or rear window 230 N, 505 mm, stroke 206 mm
5%
Windshield frame shock absorber or rear window 230 N, 505 mm, stroke 206 mm
suitable for: Frontscheibe oder Heckscheibe. Newtons: 230. A: 505 mm. B: 255 mm....
€53,28 €44,03 €50,60 €41,82
 
GRANIT Inner ring front left lift arm 75 x 88,6 x 1 mm Deutz-Fahr
5%
GRANIT
Inner ring front left lift arm 75 x 88,6 x 1 mm Deutz-Fahr
Dimensions: 75 x 88.6 x 1 mm.
€47,61 €39,35 €45,20 €37,36
 
Protective ring front right lift arm 85 x 70 x 10 mm Deutz-Fahr
5%
Protective ring front right lift arm 85 x 70 x 10 mm Deutz-Fahr
Dimensions: 85 x 70 x 10 mm.
€33,27 €27,50 €31,60 €26,12
 
Showing 337 - 350 of 350

Deutz-Fahr AgroXtra 4.57 parts for the big jobs and the small ones

An AgroXtra 4.57 kept in daily work will eventually need its engine, clutch or brakes going through. This page brings together more than 350 parts that fit the Deutz-Fahr AgroXtra 4.57, with brands such as VICTOR REINZ, LUK, ROCKINGER, HELLA and GRANIT, so a rebuild can be planned in one go.

Brakes and linkage

Fixed calipers are available for the brakes. After fitting one, bleed the system and check that the brake frees off completely when released, as a dragging caliper overheats quickly. For the linkage there are lift shaft sealing rings for the left and right side.

Engine rebuild

Cylinder liner shims, crankshaft seals, exhaust gaskets, further seals and a repair set for the feed pump cover the engine. Shims set how far each liner stands proud of the block. Measure that protrusion at several points around the liner once it is fitted. If it is out, even a brand new head gasket will not seal reliably.

When fitting a crankshaft seal, avoid running the new lip on the exact groove the old one wore into the shaft. Oil the lip lightly and press the seal in squarely. A dry lip on a worn track will start leaking again before long.

Clutch

Clutch kits and thrust bearings, from LUK among others, cover the clutch. Always fit a new thrust bearing with a new clutch. Splitting the tractor a second time for one bearing is a job nobody wants. With the clutch out, inspect the flywheel for scoring and heat cracks.

Electrics and cab

Starter motors, alternators and a V-belt handle starting and charging, and a push button switch controls the work lamps. Check the tension of a new V-belt again after the first hours of running, since a new belt stretches slightly as it beds in. In the cab there are tractor seats and gas struts for the door and windows.

Matching parts to your AgroXtra 4.57

Start with the rating plate to be sure the tractor is an AgroXtra 4.57. Seals often carry their size moulded on the ring itself, while starters and alternators have a reference number on the housing. That number is the fastest way to match an old part with one on this page.

The Deutz-Fahr AgroXtra 6.07 from the same range has its own page. If you run both, order for each type separately. All other tractors from the make are listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart