Menu
EUR

Deutz-Fahr AgroXtra 4.57 tractor parts & technical data

We carry more than 350 parts for the Deutz-Fahr AgroXtra 4.57. Work through the trailer couplings, electrics and lighting groups to find what fits your tractor.

350 parts found for Deutz-Fahr AgroXtra 4.57
Show:
GRANIT Stop cable A 1350 mm, B 1040 mm Deutz-Fahr AgroPrima, AgroXtra
5%
GRANIT
Stop cable A 1350 mm, B 1040 mm Deutz-Fahr AgroPrima, AgroXtra
A: 1350 mm. B: 1040 mm.
€154,12 €127,37 €146,40 €120,99
 
GRANIT Air receiver gasket Fendt, Deutz-Fahr
GRANIT
Air receiver gasket Fendt, Deutz-Fahr
Engine types: FL712, FL812.
€3,04 €2,51
 
GRANIT Connecting rod bolt M12 x 1,5 x 65 mm Fendt, Deutz-Fahr
GRANIT
Connecting rod bolt M12 x 1,5 x 65 mm Fendt, Deutz-Fahr
Engine types: FL913, BFL913. Dimensions: M12 x 1.5 x 65 mm.
€22,15 €18,31
 
Connecting rod bearing standard, Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
Connecting rod bearing standard, Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
Engine types: FL812, FL912. Dimensions: Ø 60 mm.
€10,45 €8,64
 
GRANIT Silencer vertical 1140 mm, Ø 74/50,5 mm Deutz-Fahr
5%
GRANIT
Silencer vertical 1140 mm, Ø 74/50,5 mm Deutz-Fahr
Version: Length: 1140 mm, Inlet Ø: 74 mm, Outlet Ø: 50.5 mm. To fit: Deutz.
€261,52 €216,13 €248,40 €205,29
 
GRANIT Bolt set 3de steering valve M10 x 190 Deutz-Fahr
GRANIT
Bolt set 3de steering valve M10 x 190 Deutz-Fahr
Technical data: M10 x 190.
€35,35 €29,21
 
GRANIT Steering valve ew/dw with float position 220 bar, 60 l/min, system SD80
5%
GRANIT
Steering valve ew/dw with float position 220 bar, 60 l/min, system SD80
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 60 l/m...
€711,79 €588,26 €676,20 €558,84
 
Leaf spring Deutz-Fahr AgroPrima 4.31-4.56, DX 80-90, DX 4.10-4.50
5%
Leaf spring Deutz-Fahr AgroPrima 4.31-4.56, DX 80-90, DX 4.10-4.50
€340,25 €281,20 €323,20 €267,11
 
GRANIT Inner ring front right lift arm 70 x 84 x 1 mm Deutz-Fahr
5%
GRANIT
Inner ring front right lift arm 70 x 84 x 1 mm Deutz-Fahr
Dimensions: 70 x 84 x 1 mm.
€51,12 €42,25 €48,55 €40,12
 
Bush left lift arm 71 x 80 x 85 mm Deutz-Fahr
5%
Bush left lift arm 71 x 80 x 85 mm Deutz-Fahr
Dimensions: 71 x 80 x 85 mm.
€141,09 €116,60 €134,00 €110,74
 
Sealing ring piston 88 x 3 mm Deutz-Fahr
Sealing ring piston 88 x 3 mm Deutz-Fahr
Dimensions: 88 x 3 mm.
€34,60 €28,60
 
GRANIT Yoke lift arm upper 265 mm, M27 x 3, Ø 20 mm Deutz-Fahr
5%
GRANIT
Yoke lift arm upper 265 mm, M27 x 3, Ø 20 mm Deutz-Fahr
Dimensions: Length = 265, Thread = M27 x 3, Ø = 20 mm.
€280,72 €232,00 €266,65 €220,37
 
GRANIT Yoke lift arm Ø 25,25 mm, thread M27 x 3 Deutz-Fahr
5%
GRANIT
Yoke lift arm Ø 25,25 mm, thread M27 x 3 Deutz-Fahr
Dimensions: Ø = 25.25, Thread = M27 x 3 mm.
€385,87 €318,90 €366,55 €302,93
 
Clevis for lifting arm length 235 mm, eye-Ø 19 mm, thread M27 x 3 Deutz
5%
Clevis for lifting arm length 235 mm, eye-Ø 19 mm, thread M27 x 3 Deutz
Dimensions: Length = 235, Eye Ø = 19, Thread = M27 x 3 mm.
€336,74 €278,30 €319,90 €264,38
 
GRANIT Pin 20 x 105 mm Deutz-Fahr
5%
GRANIT
Pin 20 x 105 mm Deutz-Fahr
Dimensions: 20 x 105 mm.
€53,42 €44,15 €50,70 €41,90
 
GRANIT Pto switch PTO clutch M14 x 1, 12 V / 24 V, make contact
5%
GRANIT
Pto switch PTO clutch M14 x 1, 12 V / 24 V, make contact
Version: Make contact, mechanical, Thread M14 x 1 with 2 hexagon nuts (AF 19), O...
€32,34 €26,73 €30,70 €25,37
 
Cobo Contact switch for wiper system, 2 plug connections
5%
Cobo
Contact switch for wiper system, 2 plug connections
Version: 2 plug connections.
€54,87 €45,35 €52,10 €43,06
 
Sensor speed inductive encoder
10%
Sensor speed inductive encoder
Version: Inductive displacement sensor (speed).
€92,37 €76,34 €83,55 €69,05
 
Driver for angle drive / drive shaft
10%
Driver for angle drive / drive shaft
Version: For angle drive.
€64,67 €53,45 €58,50 €48,35
 
GRANIT Push button switch work lamp 12 / 24 V, button yellow, Ø 30 mm
5%
GRANIT
Push button switch work lamp 12 / 24 V, button yellow, Ø 30 mm
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8...
€39,25 €32,44 €37,25 €30,79
 
GRANIT Rotary switch ventilation, without knob, 5 connections
10%
GRANIT
Rotary switch ventilation, without knob, 5 connections
Version: For blower, 3 switching steps, With 5 blade terminals.
€42,85 €35,41 €38,75 €32,02
 
GRANIT Holder
GRANIT
Holder
€50,85 €42,02
 
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
10%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 4...
€48,98 €40,48 €44,30 €36,61
 
GRANIT Clutch kit flywheel 3 mm raised Deutz, Deutz-Fahr
10%
GRANIT
Clutch kit flywheel 3 mm raised Deutz, Deutz-Fahr
To fit as: Deutz DX 80, DX 85, DX 86, DX 90, DX 92, DX 110, DX 120, DX 4.10, DX ...
€1.204,79 €995,69 €1.090,00 €900,83
 
Showing 241 - 264 of 350

Deutz-Fahr AgroXtra 4.57 parts for the big jobs and the small ones

An AgroXtra 4.57 kept in daily work will eventually need its engine, clutch or brakes going through. This page brings together more than 350 parts that fit the Deutz-Fahr AgroXtra 4.57, with brands such as VICTOR REINZ, LUK, ROCKINGER, HELLA and GRANIT, so a rebuild can be planned in one go.

Brakes and linkage

Fixed calipers are available for the brakes. After fitting one, bleed the system and check that the brake frees off completely when released, as a dragging caliper overheats quickly. For the linkage there are lift shaft sealing rings for the left and right side.

Engine rebuild

Cylinder liner shims, crankshaft seals, exhaust gaskets, further seals and a repair set for the feed pump cover the engine. Shims set how far each liner stands proud of the block. Measure that protrusion at several points around the liner once it is fitted. If it is out, even a brand new head gasket will not seal reliably.

When fitting a crankshaft seal, avoid running the new lip on the exact groove the old one wore into the shaft. Oil the lip lightly and press the seal in squarely. A dry lip on a worn track will start leaking again before long.

Clutch

Clutch kits and thrust bearings, from LUK among others, cover the clutch. Always fit a new thrust bearing with a new clutch. Splitting the tractor a second time for one bearing is a job nobody wants. With the clutch out, inspect the flywheel for scoring and heat cracks.

Electrics and cab

Starter motors, alternators and a V-belt handle starting and charging, and a push button switch controls the work lamps. Check the tension of a new V-belt again after the first hours of running, since a new belt stretches slightly as it beds in. In the cab there are tractor seats and gas struts for the door and windows.

Matching parts to your AgroXtra 4.57

Start with the rating plate to be sure the tractor is an AgroXtra 4.57. Seals often carry their size moulded on the ring itself, while starters and alternators have a reference number on the housing. That number is the fastest way to match an old part with one on this page.

The Deutz-Fahr AgroXtra 6.07 from the same range has its own page. If you run both, order for each type separately. All other tractors from the make are listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart