Menu
EUR

Deutz-Fahr AgroXtra 4.57 tractor parts & technical data

We carry more than 350 parts for the Deutz-Fahr AgroXtra 4.57. Work through the trailer couplings, electrics and lighting groups to find what fits your tractor.

350 parts found for Deutz-Fahr AgroXtra 4.57
Show:
GRANIT Push button switch hazard lights 12 / 24 V red, with lock
GRANIT
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L- R- 30- 30b- 49a- 15- 49), dustproof and splashproof, With glass soc... More
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6...
€55,42 €45,80 €52,60 €43,47
You save 5%
GRANIT Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
GRANIT
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switching function: on/off switch with silver contacts/with splash protection cap/spr... More
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switc...
€6,15 €5,08
Rear light 158 x 64 x 51 mm, 12 V, left, number plate light
Nominal voltage: 12 V. Installation location: Left. Bulb: P21W, R10W. Bulbs included: No. Light function: Indicator light, rear light, brake light, nu... More
Nominal voltage: 12 V. Installation location: Left. Bulb: P21W, R10W. ...
€70,90 €58,60 €64,10 €52,98
You save 10%
GRANIT Brake pad set 71 x 19 x 90 mm, drive shaft, Knott brake caliper
GRANIT
To fit as: Deutz DX 3.10, 3.30, 3.50, 3.60, 3.65, 4.70, AgroPrima 4.31, 4.51, 4.56, AgroXtra 3.57, 4.07, 4.17, 4.47, 4.57 More
To fit as: Deutz DX 3.10, 3.30, 3.50, 3.60, 3.65, 4.70, AgroPrima 4.31...
€26,95 €22,27
AKS-Dasis Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
AKS-Dasis
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 12 | Additional information: Cylinder head ID: B Inlet: 19.1 mm Outlet: 22.2 mm |... More
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 1...
€483,47 €399,56 €459,25 €379,55
You save 5%
Scharmüller Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
Scharmüller
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota grey | Guide width (mm): 32 | Load capacity (kg): 1500 | Category: Bearing support... More
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota gr...
€1.327,65 €1.097,23
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
MAHLE
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dust-tight, with fan | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Cha... More
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional info...
€320,94 €265,24 €200,55 €165,74
You save 38%
MAHLE Alternator 14 V, 65 A, flange 56 mm, with fan
MAHLE
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Nominal voltag... More
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal value...
€290,88 €240,40 €181,80 €150,25
You save 38%
HELLA Alternator 14 V, 55 A without belt pulley Deutz-Fahr
HELLA
Charging current (A): 55 | Nominal voltage (V): 14 | Additional information: Without pulley More
Charging current (A): 55 | Nominal voltage (V): 14 | Additional inform...
€617,32 €510,18 €496,30 €410,17
You save 20%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€571,00 €471,90 €459,00 €379,34
You save 20%
Cross journal 30 x 92 mm, maintenance-free
A: 30 mm. B: 92 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 30 mm. B: 92 mm. Universal joint size: . Lubrication system: Mainte...
€113,86 €94,10 €108,15 €89,38
You save 5%
Master brake cylinder Ø 20,64 mm, DOT4 Deutz-Fahr AgroPrima, AgroXtra
Medium: DOT4. Hole Ø: 20.64 mm. More
Medium: DOT4. Hole Ø: 20.64 mm.
€603,03 €498,37 €572,85 €473,43
You save 5%
Protective cap brake cylinder DOT4 Deutz D 6807C-7807, DX 3.70SC-86
GRANIT Strainer brake reservoir Deutz-Fahr
Expansion tank 2-chamber 0,25 l, H 128,5 mm Deutz-Fahr
h: 95 mm. Nominal volume: 0,25 l. Fig.: A. H: 128,5 mm. More
h: 95 mm. Nominal volume: 0,25 l. Fig.: A. H: 128,5 mm.
€47,48 €39,24 €45,10 €37,27
You save 5%
Gaiter Ø 31 mm upper Deutz DX 80-145
Inner Ø top: 31 mm. More
Inner Ø top: 31 mm.
€59,80 €49,42 €56,80 €46,94
You save 5%
VICTOR REINZ Crankshaft seal for Ø 65 x 85 x 10,5 mm engine FL912, FL913 Deutz-Fahr
€35,82 €29,60 €34,00 €28,10
You save 5%
Filter set engine oil, fuel, air, hydraulics, safety element
To fit type: AgroXtra 4.47, 4.57. Set consisting of: Engine oil filter, main fuel filter, main air filter, safety element, hydraulic oil filter. To fi... More
To fit type: AgroXtra 4.47, 4.57. Set consisting of: Engine oil filter...
€131,95 €109,05 €125,35 €103,60
You save 5%
VICTOR REINZ Cylinder head gasket 1,1 mm, outer-Ø 120 mm Fendt, Deutz-Fahr
VICTOR REINZ
Engine types: FL912, FL913, BFL912, BFL913. Colour: A-Form. Outer Ø: 120 mm. Inner Ø: 102,6 mm. Material: Stahl. Thickness: 1,1 mm. More
Engine types: FL912, FL913, BFL912, BFL913. Colour: A-Form. Outer Ø: ...
€10,25 €8,47
Showing 121 - 144 of 350

Deutz-Fahr AgroXtra 4.57 parts for the big jobs and the small ones

An AgroXtra 4.57 kept in daily work will eventually need its engine, clutch or brakes going through. This page brings together more than 350 parts that fit the Deutz-Fahr AgroXtra 4.57, with brands such as VICTOR REINZ, LUK, ROCKINGER, HELLA and GRANIT, so a rebuild can be planned in one go.

Brakes and linkage

Fixed calipers are available for the brakes. After fitting one, bleed the system and check that the brake frees off completely when released, as a dragging caliper overheats quickly. For the linkage there are lift shaft sealing rings for the left and right side.

Engine rebuild

Cylinder liner shims, crankshaft seals, exhaust gaskets, further seals and a repair set for the feed pump cover the engine. Shims set how far each liner stands proud of the block. Measure that protrusion at several points around the liner once it is fitted. If it is out, even a brand new head gasket will not seal reliably.

When fitting a crankshaft seal, avoid running the new lip on the exact groove the old one wore into the shaft. Oil the lip lightly and press the seal in squarely. A dry lip on a worn track will start leaking again before long.

Clutch

Clutch kits and thrust bearings, from LUK among others, cover the clutch. Always fit a new thrust bearing with a new clutch. Splitting the tractor a second time for one bearing is a job nobody wants. With the clutch out, inspect the flywheel for scoring and heat cracks.

Electrics and cab

Starter motors, alternators and a V-belt handle starting and charging, and a push button switch controls the work lamps. Check the tension of a new V-belt again after the first hours of running, since a new belt stretches slightly as it beds in. In the cab there are tractor seats and gas struts for the door and windows.

Matching parts to your AgroXtra 4.57

Start with the rating plate to be sure the tractor is an AgroXtra 4.57. Seals often carry their size moulded on the ring itself, while starters and alternators have a reference number on the housing. That number is the fastest way to match an old part with one on this page.

The Deutz-Fahr AgroXtra 6.07 from the same range has its own page. If you run both, order for each type separately. All other tractors from the make are listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart