Menu
EUR

Deutz-Fahr AgroXtra 4.57 tractor parts & technical data

We carry more than 350 parts for the Deutz-Fahr AgroXtra 4.57. Work through the trailer couplings, electrics and lighting groups to find what fits your tractor.

350 parts found for Deutz-Fahr AgroXtra 4.57
Show:
GRANIT Push button switch hazard lights 12 / 24 V red, with lock
5%
GRANIT
Push button switch hazard lights 12 / 24 V red, with lock
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L...
€55,42 €45,80 €52,60 €43,47
 
GRANIT Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
GRANIT
Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switching funct...
€6,15 €5,08
 
Rear light 158 x 64 x 51 mm, 12 V, left, number plate light
10%
Rear light 158 x 64 x 51 mm, 12 V, left, number plate light
Nominal voltage: 12 V. Installation location: Left. Bulb: P21W, R10W. Bulbs incl...
€70,90 €58,60 €64,10 €52,98
 
GRANIT Brake pad set 71 x 19 x 90 mm, drive shaft, Knott brake caliper
GRANIT
Brake pad set 71 x 19 x 90 mm, drive shaft, Knott brake caliper
To fit as: Deutz DX 3.10, 3.30, 3.50, 3.60, 3.65, 4.70, AgroPrima 4.31, 4.51, 4....
€26,95 €22,27
 
AKS-Dasis Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
5%
AKS-Dasis
Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 12 | Additio...
€483,47 €399,56 €459,25 €379,55
 
Scharmüller Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
Scharmüller
Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota grey | Guide...
€1.327,65 €1.097,23
 
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
38%
MAHLE
Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dus...
€320,94 €265,24 €200,55 €165,74
 
MAHLE Alternator 14 V, 65 A, flange 56 mm, with fan
38%
MAHLE
Alternator 14 V, 65 A, flange 56 mm, with fan
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal values (V / A): 1...
€290,88 €240,40 €181,80 €150,25
 
HELLA Alternator 14 V, 55 A without belt pulley Deutz-Fahr
20%
HELLA
Alternator 14 V, 55 A without belt pulley Deutz-Fahr
Charging current (A): 55 | Nominal voltage (V): 14 | Additional information: Wit...
€617,32 €510,18 €496,30 €410,17
 
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
20%
HELLA
Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€571,00 €471,90 €459,00 €379,34
 
Cross journal 30 x 92 mm, maintenance-free
5%
Cross journal 30 x 92 mm, maintenance-free
A: 30 mm. B: 92 mm. Universal joint size: . Lubrication system: Maintenance-free...
€113,86 €94,10 €108,15 €89,38
 
Master brake cylinder Ø 20,64 mm, DOT4 Deutz-Fahr AgroPrima, AgroXtra
5%
Master brake cylinder Ø 20,64 mm, DOT4 Deutz-Fahr AgroPrima, AgroXtra
Medium: DOT4. Hole Ø: 20.64 mm.
€603,03 €498,37 €572,85 €473,43
 
GRANIT Strainer brake reservoir Deutz-Fahr
GRANIT
Strainer brake reservoir Deutz-Fahr
€4,45 €3,68
 
Expansion tank 2-chamber 0,25 l, H 128,5 mm Deutz-Fahr
5%
Expansion tank 2-chamber 0,25 l, H 128,5 mm Deutz-Fahr
h: 95 mm. Nominal volume: 0,25 l. Fig.: A. H: 128,5 mm.
€47,48 €39,24 €45,10 €37,27
 
Seal PTO shaft end piece Deutz-Fahr
Seal PTO shaft end piece Deutz-Fahr
€27,00 €22,31
 
Gaiter Ø 31 mm upper Deutz DX 80-145
5%
Gaiter Ø 31 mm upper Deutz DX 80-145
Inner Ø top: 31 mm.
€59,80 €49,42 €56,80 €46,94
 
VICTOR REINZ Crankshaft seal for Ø 65 x 85 x 10,5 mm engine FL912, FL913 Deutz-Fahr
5%
VICTOR REINZ
Crankshaft seal for Ø 65 x 85 x 10,5 mm engine FL912, FL913 Deutz-Fahr
€35,82 €29,60 €34,00 €28,10
 
Filter set engine oil, fuel, air, hydraulics, safety element
5%
Filter set engine oil, fuel, air, hydraulics, safety element
To fit type: AgroXtra 4.47, 4.57. Set consisting of: Engine oil filter, main fue...
€131,95 €109,05 €125,35 €103,60
 
VICTOR REINZ Cylinder head gasket 1,1 mm, outer-Ø 120 mm Fendt, Deutz-Fahr
VICTOR REINZ
Cylinder head gasket 1,1 mm, outer-Ø 120 mm Fendt, Deutz-Fahr
Engine types: FL912, FL913, BFL912, BFL913. Colour: A-Form. Outer Ø: 120 mm. Inn...
€10,25 €8,47
 
Showing 121 - 144 of 350

Deutz-Fahr AgroXtra 4.57 parts for the big jobs and the small ones

An AgroXtra 4.57 kept in daily work will eventually need its engine, clutch or brakes going through. This page brings together more than 350 parts that fit the Deutz-Fahr AgroXtra 4.57, with brands such as VICTOR REINZ, LUK, ROCKINGER, HELLA and GRANIT, so a rebuild can be planned in one go.

Brakes and linkage

Fixed calipers are available for the brakes. After fitting one, bleed the system and check that the brake frees off completely when released, as a dragging caliper overheats quickly. For the linkage there are lift shaft sealing rings for the left and right side.

Engine rebuild

Cylinder liner shims, crankshaft seals, exhaust gaskets, further seals and a repair set for the feed pump cover the engine. Shims set how far each liner stands proud of the block. Measure that protrusion at several points around the liner once it is fitted. If it is out, even a brand new head gasket will not seal reliably.

When fitting a crankshaft seal, avoid running the new lip on the exact groove the old one wore into the shaft. Oil the lip lightly and press the seal in squarely. A dry lip on a worn track will start leaking again before long.

Clutch

Clutch kits and thrust bearings, from LUK among others, cover the clutch. Always fit a new thrust bearing with a new clutch. Splitting the tractor a second time for one bearing is a job nobody wants. With the clutch out, inspect the flywheel for scoring and heat cracks.

Electrics and cab

Starter motors, alternators and a V-belt handle starting and charging, and a push button switch controls the work lamps. Check the tension of a new V-belt again after the first hours of running, since a new belt stretches slightly as it beds in. In the cab there are tractor seats and gas struts for the door and windows.

Matching parts to your AgroXtra 4.57

Start with the rating plate to be sure the tractor is an AgroXtra 4.57. Seals often carry their size moulded on the ring itself, while starters and alternators have a reference number on the housing. That number is the fastest way to match an old part with one on this page.

The Deutz-Fahr AgroXtra 6.07 from the same range has its own page. If you run both, order for each type separately. All other tractors from the make are listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart