Menu
EUR

Deutz-Fahr AgroXtra 4.57 tractor parts & technical data

We carry more than 350 parts for the Deutz-Fahr AgroXtra 4.57. Work through the trailer couplings, electrics and lighting groups to find what fits your tractor.

350 parts found for Deutz-Fahr AgroXtra 4.57
Show:
Valve cover bolt sealing ring nylon, Ø 16 x 8 mm, thickness 3,7 mm
Engine types: FL712, FL812. Outer Ø: 16 mm. Form: Asymmetrical. Inner Ø: 8 mm. Material: Nylon. Thickness: 3,7 mm. More
Engine types: FL712, FL812. Outer Ø: 16 mm. Form: Asymmetrical. Inner...
€1,56 €1,29
GRANIT Valve guide inlet and outlet Fendt, Deutz-Fahr
GRANIT
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€7,75 €6,41
GRANIT Cylinder head bolt 210 mm engine Deutz FL912, FL913
GRANIT
Engine types: FL912, FL913. Dimensions: Length: 210 mm. Menke no.: 68008. More
Engine types: FL912, FL913. Dimensions: Length: 210 mm. Menke no.: 680...
€23,40 €19,34
Outlet valve new version 3-rings Deutz engine F2L912-BF6L913
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€33,00 €27,27
GRANIT Control unit 220 bar, 40 l/min, 220 x Ø 58 mm Deutz-Fahr
GRANIT
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 40 l/min., Tightening torque: 25 Nm, Dimensions: 220 x Ø 58 mm. More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€595,67 €492,29 €565,85 €467,64
You save 5%
GRAMMER Tractor seat Maximo Professional Deutz, Deutz-Fahr
GRAMMER
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 mm. Joystick con... More
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric....
€2.531,15 €2.091,86
Bush right lift arm 74 x 80 x 85 mm Deutz-Fahr
Dimensions: 74 x 80 x 85 mm. More
Dimensions: 74 x 80 x 85 mm.
€171,94 €142,10 €163,30 €134,96
You save 5%
Sealing ring piston 70 x 89 x 12 mm Deutz-Fahr
Dimensions: 70 x 89 x 12 mm. More
Dimensions: 70 x 89 x 12 mm.
€39,26 €32,45 €37,25 €30,79
You save 5%
Lift rod 440 mm, M27 x 3, hole spacing 163 mm Deutz-Fahr
Dimensions: Length = 440, Thread = M27 x 3, Hole spacing = 163 mm. More
Dimensions: Length = 440, Thread = M27 x 3, Hole spacing = 163 mm.
€314,36 €259,80 €298,60 €246,78
You save 5%
GRANIT Sealing ring lift shaft left 75 x 90 x 10 mm, NBR Deutz-Fahr
GRANIT
Dimensions: 75 x 90 x 10 mm. Material: NBR. More
Dimensions: 75 x 90 x 10 mm. Material: NBR.
€38,18 €31,55 €34,50 €28,51
You save 10%
Step 340 x 160 x 30 mm Deutz-Fahr Agroprima, Agrostar, Agroxtra, DX
Dimensions: 340x160x30mm mm. More
Dimensions: 340x160x30mm mm.
€90,48 €74,78 €85,95 €71,03
You save 5%
Temperature warning switch 6 - 24 V, M14 x 1,5 mm, up to 100 °C
Version: Flat head | 6 - 24 V | M14 x 1.5 | Up to max. 100. Connection: Flat head. Thread: M14 x 1.5. Temperature: 40 - 100 °C. More
Version: Flat head | 6 - 24 V | M14 x 1.5 | Up to max. 100. Connection...
€86,68 €71,64 €78,40 €64,79
You save 10%
Push button switch windshield wiper 12/24 V, button yellow, Ø 30 mm
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 5 blade terminals 6.3 x 0.8 (+- 53a- 53- 31b- 31), Dustproof and splashproof, With glass socket ... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 5 blade terminal...
€41,53 €34,32 €37,55 €31,03
You save 10%
HELLA Reflector red 180 x 40 mm, thickness 6,5 mm, Ø 5,2 mm, hole spacing 150 mm
HELLA
Colour: Red. Hole Ø: 5.2 mm. Width: 180 mm. Form: Rectangular. Height: 40 mm. Hole spacing: 150 mm. Material: Plastic. Material thickness: 6,5 mm. Fi... More
Colour: Red. Hole Ø: 5.2 mm. Width: 180 mm. Form: Rectangular. Height...
€4,46 €3,69
Replacement key plastic-coated black, lock number 14607
Version: Locking no. 14607 | To fit: New Holland, Steyr More
Version: Locking no. 14607 | To fit: New Holland, Steyr
€7,25 €5,99
Gasket exhaust Deutz, Deutz-Fahr
To fit as: Deutz series 07, 4007, 4507, 4807, 5207, 6007, 6207, 6507, 6807, 6907, 7007, 7207, series 07C, 4507C, 4807C, 5207C, 6007C, 6207C, 6507C, 68... More
To fit as: Deutz series 07, 4007, 4507, 4807, 5207, 6007, 6207, 6507, ...
€7,20 €5,95
MAHLE Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
MAHLE
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additional information: Dust-tight | Installation angle (°): l 60 | Mounting L / d / R... More
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additio...
€312,95 €258,64 €195,55 €161,61
You save 38%
SACHS Thrust bearing 106 x 140 x 25 mm
SACHS
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€196,98 €162,79 €187,10 €154,63
You save 5%
SACHS Thrust bearing 65 x 96 x 23 mm
SACHS
Dimensions (mm): 65 x 96 x 23 More
Dimensions (mm): 65 x 96 x 23
€134,70 €111,32 €127,95 €105,74
You save 5%
LUK Thrust bearing PTO clutch 106 x 140 x 25 mm
LUK
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€216,71 €179,10 €205,85 €170,12
You save 5%
LUK Clutch plate 310UKF 31 x 35 mm 16 splines Deutz-Fahr
LUK
Dimensions (mm): 31 x 35 16 grooves More
Dimensions (mm): 31 x 35 16 grooves
€240,23 €198,54 €228,20 €188,60
You save 5%
GRANIT Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
GRANIT
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€11,15 €9,21
Showing 193 - 216 of 350

Deutz-Fahr AgroXtra 4.57 parts for the big jobs and the small ones

An AgroXtra 4.57 kept in daily work will eventually need its engine, clutch or brakes going through. This page brings together more than 350 parts that fit the Deutz-Fahr AgroXtra 4.57, with brands such as VICTOR REINZ, LUK, ROCKINGER, HELLA and GRANIT, so a rebuild can be planned in one go.

Brakes and linkage

Fixed calipers are available for the brakes. After fitting one, bleed the system and check that the brake frees off completely when released, as a dragging caliper overheats quickly. For the linkage there are lift shaft sealing rings for the left and right side.

Engine rebuild

Cylinder liner shims, crankshaft seals, exhaust gaskets, further seals and a repair set for the feed pump cover the engine. Shims set how far each liner stands proud of the block. Measure that protrusion at several points around the liner once it is fitted. If it is out, even a brand new head gasket will not seal reliably.

When fitting a crankshaft seal, avoid running the new lip on the exact groove the old one wore into the shaft. Oil the lip lightly and press the seal in squarely. A dry lip on a worn track will start leaking again before long.

Clutch

Clutch kits and thrust bearings, from LUK among others, cover the clutch. Always fit a new thrust bearing with a new clutch. Splitting the tractor a second time for one bearing is a job nobody wants. With the clutch out, inspect the flywheel for scoring and heat cracks.

Electrics and cab

Starter motors, alternators and a V-belt handle starting and charging, and a push button switch controls the work lamps. Check the tension of a new V-belt again after the first hours of running, since a new belt stretches slightly as it beds in. In the cab there are tractor seats and gas struts for the door and windows.

Matching parts to your AgroXtra 4.57

Start with the rating plate to be sure the tractor is an AgroXtra 4.57. Seals often carry their size moulded on the ring itself, while starters and alternators have a reference number on the housing. That number is the fastest way to match an old part with one on this page.

The Deutz-Fahr AgroXtra 6.07 from the same range has its own page. If you run both, order for each type separately. All other tractors from the make are listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart