Menu
EUR

Deutz D 6007 tractor parts & technical data

The right parts keep a Deutz D 6007 from the 07 series running. This page offers more than 200 of them, such as trailer couplings, electrics and lighting.

226 parts found for Deutz-Fahr D 6007
Show:
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,98 €40,48 €44,30 €36,61
You save 10%
HELLA Indicator / position light left IHC, Deutz-Fahr, Fendt, Kubota
HELLA
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 940, 644, 744, 844, 844 S, 485XL, 585XL, 685XL, 743XL, 745XL, 785XL, 844XL, 856XL... More
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 9...
€18,15 €15,00 €15,81 €13,07
You save 13%
GRANIT Thrust bearing single PTO clutch 70 x 110 x 20 mm
GRANIT
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€34,61 €28,60 €32,85 €27,15
You save 5%
GRANIT Thrust bearing driving clutch 55 x 92 x 16 mm Deutz-Fahr
GRANIT
Dimensions (mm): 55 x 92 x 16 More
Dimensions (mm): 55 x 92 x 16
€111,31 €91,99 €105,70 €87,36
You save 5%
Elring Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
Elring
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: FPM (fluoro rubber) More
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: F...
€67,57 €55,84 €64,15 €53,02
You save 5%
PTO shaft end piece 225 mm Deutz-Fahr
Version: Length 225 mm. Notes: If the old version with Ø 35 mm is installed, the sealing ring 595038X052X07 SL and the cover 66002384203 must also be... More
Version: Length 225 mm. Notes: If the old version with Ø 35 mm is ins...
€609,25 €503,51 €578,75 €478,31
You save 5%
GRANIT Oil cooler Deutz-Fahr D 5206 - D 6007C, Intrac 2002
€309,38 €255,69 €293,90 €242,89
You save 5%
Piston pin engine Deutz FL912, FL913
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€26,75 €22,11
GRANIT Disc for cylinder head bolt Ø 12 x 23 x 7 mm engine FL912, FL913
GRANIT
Engine types: FL912, FL913. Dimensions: Ø 12 x 23 x 7 mm. More
Engine types: FL912, FL913. Dimensions: Ø 12 x 23 x 7 mm.
€13,75 €11,36
GRANIT Valve spring engine F2L912-F6L913, BF6L913 Deutz-Fahr, Fendt
GRANIT
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€11,45 €9,46
Connecting rod bearing standard, Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
Engine types: FL812, FL912. Dimensions: Ø 60 mm. More
Engine types: FL812, FL912. Dimensions: Ø 60 mm.
€10,45 €8,64
GRANIT Tube rear outer-Ø 45 mm, inner-Ø inlet 41 mm Deutz-Fahr
GRANIT
Version: Outer Ø: 45 mm, Inner Ø inlet: 41 mm. More
Version: Outer Ø: 45 mm, Inner Ø inlet: 41 mm.
€47,64 €39,37 €45,25 €37,40
You save 5%
Silencer 537 mm, Ø 46/57 mm Deutz-Fahr
Version: Length = 537 mm, Inner Ø = 46 / 57 mm. More
Version: Length = 537 mm, Inner Ø = 46 / 57 mm.
€82,46 €68,15 €78,30 €64,71
You save 5%
Bolt set 1ste steering valve M10 x 100 Deutz-Fahr
Technical data: M10 x 100. More
Technical data: M10 x 100.
€15,60 €12,89
Bolt set 2de steering valve M10 x 150 Deutz-Fahr
Technical data: M10 x 150. More
Technical data: M10 x 150.
€25,25 €20,87
End plate steering valve SD60 250 bar, 50 l/min, 100 x 118 x 25 mm
Technical data: Max. operating pressure: 250 bar, Nominal flow rate: max. 50 l/min., Tightening torque: 30 Nm, Dimensions: 100 x 118 x 25 mm, Fastenin... More
Technical data: Max. operating pressure: 250 bar, Nominal flow rate: m...
€163,48 €135,11 €155,30 €128,35
You save 5%
O-ring for oil dipstick 30 x 3,5 mm Deutz-Fahr
Dimensions: 30 x 3.5 mm. More
Dimensions: 30 x 3.5 mm.
€16,00 €13,22
Bush left lift arm 71 x 80 x 85 mm Deutz-Fahr
Dimensions: 71 x 80 x 85 mm. More
Dimensions: 71 x 80 x 85 mm.
€141,09 €116,60 €134,00 €110,74
You save 5%
Sealing ring piston 84 x 3 mm Deutz-Fahr
Dimensions: 84 x 3 mm. More
Dimensions: 84 x 3 mm.
€16,70 €13,80
GRANIT Lift rod 680 - 880 mm, ball joint-Ø 28,4 mm Deutz-Fahr
GRANIT
Dimensions: Length = 680 - 880, Ball joint Ø = 28.4, Clevis Ø = 20, Internal dimension of clevis = 25 mm. More
Dimensions: Length = 680 - 880, Ball joint Ø = 28.4, Clevis Ø = 20, ...
€212,66 €175,75 €202,00 €166,94
You save 5%
HELLA Glass rear light right without number plate light
HELLA
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 940, Deutz-Fahr 2506, 3006, 4006, 4506, 5006, 5206, 5506, 6006, 6206, 6806, 7206,... More
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 9...
€16,96 €14,02 €14,00 €11,57
You save 17%
HELLA Lens, left indicator/position light IHC, Deutz-Fahr, Fendt, Kubota
HELLA
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 940, 644, 744, 844, 844 S, 485XL, 585XL, 685XL, 743XL, 745XL, 785XL, 844XL, 856XL... More
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 9...
€16,26 €13,44 €13,45 €11,12
You save 17%
Showing 193 - 216 of 226

Deutz D 6007 parts for an engine rebuild, clutch and linkage

Opening up a Deutz D 6007 for an engine rebuild or a new clutch goes smoothly only when every part is ready on the bench. This page lists more than 200 parts for the D 6007, from GRANIT and from brands including HELLA, LUK, Walterscheid and VICTOR REINZ.

Clutch work

For the clutch there are double clutch units and thrust bearings for the driving clutch. A thrust bearing that sings when you press the pedal is best replaced together with the clutch, since the tractor has to be split for either job anyway.

Engine rebuild: rings, seals and shims

For the engine you will find piston ring sets, crankshaft seals, shims for the cylinder liners and exhaust gaskets, enough to sort out an engine that leaks or burns oil in one go.

Check the ring gap on new piston rings first. Push the ring squarely into the bore and measure the gap with a feeler gauge. Then fit the rings to the piston with the gaps staggered so they never line up. The shims under each cylinder liner set how far the liner stands proud of the block. Measure that protrusion and use the same thickness that came out, otherwise the head gasket will not seal properly.

With a new crankshaft seal, look closely at the running surface on the shaft. If the old seal has worn a groove, press the new one in slightly deeper or shallower so the lip runs on clean metal. Oil the lip lightly and drive the seal in squarely, since a seal that sits crooked leaks from day one.

Lift linkage, electrics and smaller parts

For the linkage there are sealing rings for the lift shaft and bushes for the lift arms. A lift arm that visibly rocks on its shaft usually has worn bushes, and the seal next to them has suffered from the play too, so replace both. The D 6007 is also covered with starter motors, alternators, tension springs, bolt sets for the steering valve, lamp lenses, a lockable tank cap with ventilation and a drawbar.

That lockable tank cap earns its place on a tractor parked outside or in an open yard. The vent prevents a vacuum in the tank, and the lock keeps uninvited visitors away from the diesel.

The right part for your Deutz

Write down the serial number from the type plate and also the engine number, which adds certainty for engine parts. The D 6007 belongs to the 07 series from Deutz. Compare the reference number on the old part with the product details, and for piston rings also measure the bore.

From the same series, the Deutz D 6207, Deutz D 6807 and Deutz D 7007 have pages of their own, useful when more than one Deutz lives in the shed. The complete range for the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart