Menu
EUR

Deutz D 6007 tractor parts & technical data

The right parts keep a Deutz D 6007 from the 07 series running. This page offers more than 200 of them, such as trailer couplings, electrics and lighting.

226 parts found for Deutz-Fahr D 6007
Show:
GRANIT Adaptor for
€67,03 €55,40 €63,65 €52,60
You save 5%
HELLA Glass right indicator/position light IHC, Deutz-Fahr, Fendt, Kubota
HELLA
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 940, 644, 744, 844, 844 S, 485XL, 585XL, 685XL, 743XL, 745XL, 785XL, 844XL, 856XL... More
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 9...
€16,26 €13,44 €13,45 €11,12
You save 17%
Walterscheid Trailer coupling hitch pin 38 mm, 65,6 kN, black Deutz-Fahr
Walterscheid
Colour: Black | Load capacity (kg): 2000 | Lock: Automatic, spherical hitch bolt | Included in delivery: Includes 1x coupling 770KU2000/758NB. Locking... More
Colour: Black | Load capacity (kg): 2000 | Lock: Automatic, spherical ...
€2.256,41 €1.864,80 €1.772,85 €1.465,17
You save 21%
LUK Thrust bearing PTO clutch 75 x 115 x 20 mm
LUK
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€175,89 €145,36 €167,00 €138,02
You save 5%
LUK Thrust bearing PTO shaft 70 x 110 x 20 mm
LUK
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€120,88 €99,90 €114,80 €94,88
You save 5%
LUK Clutch plate 250UKF 28 x 32 mm, 17 splines Deutz-Fahr
LUK
Dimensions (mm): 28 x 32 17 grooves More
Dimensions (mm): 28 x 32 17 grooves
€192,47 €159,07 €182,80 €151,07
You save 5%
KS Connecting rod bearing Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
KS
Dimensions: Ø 60 mm, Width 25 mm. More
Dimensions: Ø 60 mm, Width 25 mm.
€25,40 €20,99
VICTOR REINZ Crankshaft seal for Ø 65 x 85 x 10,5 mm engine FL912, FL913 Deutz-Fahr
€35,82 €29,60 €34,00 €28,10
You save 5%
Sealing ring for injection nozzle Ø 19 x 9,2 mm, 2 mm thick, copper Deutz-Fahr
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm. More
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm.
€2,90 €2,40
Oil dipstick engine Deutz-Fahr
€77,67 €64,19 €73,75 €60,95
You save 5%
Brass nut exhaust manifold M8, height 10 mm Deutz-Fahr
Version: Thread M8, Height: 10 mm. Thread: M8. More
Version: Thread M8, Height: 10 mm. Thread: M8.
€7,55 €6,24
GRANIT Piston ring set 3 rings Ø 102 mm, 2x 3 mm trapezoidal ring / 3,5 mm
GRANIT
Dimensions: 3 rings, Ø 102 mm, 3 mm (trapezoidal ring) / 3 mm (trapezoidal ring) / 3.5 mm. More
Dimensions: 3 rings, Ø 102 mm, 3 mm (trapezoidal ring) / 3 mm (trapez...
€57,31 €47,36 €54,40 €44,96
You save 5%
GRANIT Oil sump gasket 3 cylinder engine F3L812 Fendt, Deutz-Fahr
GRANIT
Engine types: F3L812. More
Engine types: F3L812.
€6,75 €5,58
GRANIT Thrust washer for thickness 1,3 mm Fendt, Deutz-Fahr
GRANIT
Engine types: FL812, FL912. Dimensions: 5. More
Engine types: FL812, FL912. Dimensions: 5.
€15,55 €12,85
Valve cover bolt sealing ring nylon, Ø 16 x 8 mm, thickness 3,7 mm
Engine types: FL712, FL812. Outer Ø: 16 mm. Form: Asymmetrical. Inner Ø: 8 mm. Material: Nylon. Thickness: 3,7 mm. More
Engine types: FL712, FL812. Outer Ø: 16 mm. Form: Asymmetrical. Inner...
€1,56 €1,29
GRANIT Oil pump thread 28 x 1,5 mm Fendt, Renault, Deutz-Fahr
GRANIT
Dimensions: Thread 28 x 1.5 mm. More
Dimensions: Thread 28 x 1.5 mm.
€111,61 €92,24 €106,00 €87,60
You save 5%
Piston set complete Ø 102 mm, combustion chamber 56 mm, depth 17 mm
Dimensions: 3 rings, Ø 102 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 56 mm, Combustion chamber depth 17 mm, Without coolant channel. More
Dimensions: 3 rings, Ø 102 mm, Gudgeon pin Ø 35 x 80 mm, Combustion ...
€208,45 €172,27 €198,00 €163,64
You save 5%
Bolt set 2de steering valve 3x M8 x 140 Deutz-Fahr
Technical data: 3x M8 x 140. Menke no.: 51681. More
Technical data: 3x M8 x 140. Menke no.: 51681.
€34,00 €28,10
GRANIT Check valve steering valve Deutz-Fahr
GRANIT
Description: for control unit 02379662, 04360637, 04331325, 02940278. More
Description: for control unit 02379662, 04360637, 04331325, 02940278.
€171,59 €141,81 €163,00 €134,71
You save 5%
Bolt set 1ste steering valve 1x M8 x 90, 2x M8 x 80 Deutz-Fahr
Technical data: consisting of: 1 x M8 x 90, 2 x M8 x 80, for 1st Control unit. More
Technical data: consisting of: 1 x M8 x 90, 2 x M8 x 80, for 1st Contr...
€13,90 €11,49
Single pump 16,8 cm³/rpm., taper 1:5, Ø 17 x 17, left
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 45 mm. B: 107,5 mm. Direction of rotation: Anticlockwise. Line connection suction s... More
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 45 ...
€223,04 €184,33 €211,85 €175,08
You save 5%
Bush right lift arm 74 x 80 x 85 mm Deutz-Fahr
Dimensions: 74 x 80 x 85 mm. More
Dimensions: 74 x 80 x 85 mm.
€171,94 €142,10 €163,30 €134,96
You save 5%
GRANIT Lift rod 700 - 870 mm, ball joint-Ø 25,4 mm Deutz-Fahr
GRANIT
Dimensions: Length = 700 - 870, Ball joint Ø = 25.4, Clevis Ø = 20 mm. More
Dimensions: Length = 700 - 870, Ball joint Ø = 25.4, Clevis Ø = 20 m
€321,38 €265,60 €305,30 €252,31
You save 5%
GRANIT Lamp socket intermediate part rear
€35,27 €29,15 €33,50 €27,69
You save 5%
Showing 169 - 192 of 226

Deutz D 6007 parts for an engine rebuild, clutch and linkage

Opening up a Deutz D 6007 for an engine rebuild or a new clutch goes smoothly only when every part is ready on the bench. This page lists more than 200 parts for the D 6007, from GRANIT and from brands including HELLA, LUK, Walterscheid and VICTOR REINZ.

Clutch work

For the clutch there are double clutch units and thrust bearings for the driving clutch. A thrust bearing that sings when you press the pedal is best replaced together with the clutch, since the tractor has to be split for either job anyway.

Engine rebuild: rings, seals and shims

For the engine you will find piston ring sets, crankshaft seals, shims for the cylinder liners and exhaust gaskets, enough to sort out an engine that leaks or burns oil in one go.

Check the ring gap on new piston rings first. Push the ring squarely into the bore and measure the gap with a feeler gauge. Then fit the rings to the piston with the gaps staggered so they never line up. The shims under each cylinder liner set how far the liner stands proud of the block. Measure that protrusion and use the same thickness that came out, otherwise the head gasket will not seal properly.

With a new crankshaft seal, look closely at the running surface on the shaft. If the old seal has worn a groove, press the new one in slightly deeper or shallower so the lip runs on clean metal. Oil the lip lightly and drive the seal in squarely, since a seal that sits crooked leaks from day one.

Lift linkage, electrics and smaller parts

For the linkage there are sealing rings for the lift shaft and bushes for the lift arms. A lift arm that visibly rocks on its shaft usually has worn bushes, and the seal next to them has suffered from the play too, so replace both. The D 6007 is also covered with starter motors, alternators, tension springs, bolt sets for the steering valve, lamp lenses, a lockable tank cap with ventilation and a drawbar.

That lockable tank cap earns its place on a tractor parked outside or in an open yard. The vent prevents a vacuum in the tank, and the lock keeps uninvited visitors away from the diesel.

The right part for your Deutz

Write down the serial number from the type plate and also the engine number, which adds certainty for engine parts. The D 6007 belongs to the 07 series from Deutz. Compare the reference number on the old part with the product details, and for piston rings also measure the bore.

From the same series, the Deutz D 6207, Deutz D 6807 and Deutz D 7007 have pages of their own, useful when more than one Deutz lives in the shed. The complete range for the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart