Menu
EUR

Deutz D 6807 tractor parts & technical data

Working on a Deutz D 6807? More than 250 parts for this 07 series tractor are collected on one page, from trailer couplings and electrics to lighting.

270 parts found for Deutz-Fahr D 6807
Show:
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
23%
HELLA
Alternator CA1433IR 14 V / 95 A without belt pulley
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Wit...
€503,99 €416,52 €388,33 €320,93
 
Clutch plate 250, 26 x 32 mm, 10 splines Deutz-Fahr
8%
Clutch plate 250, 26 x 32 mm, 10 splines Deutz-Fahr
Dimensions (mm): 26 x 32, 10 grooves | Additional information: Made in Germany
€143,09 €118,26 €131,64 €108,80
 
Thrust bearing driving clutch 55 x 91,5 x 25 mm
8%
Thrust bearing driving clutch 55 x 91,5 x 25 mm
Dimensions (mm): 55 x 91.5 x 25
€87,90 €72,64 €80,87 €66,83
 
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
Dimensions (mm): 20 x 52 x 15
€11,65 €9,63
 
Fuel hose connection 14 / 8 mm Deutz-Fahr D 2807 - D 7807
8%
Fuel hose connection 14 / 8 mm Deutz-Fahr D 2807 - D 7807
€70,58 €58,33 €64,93 €53,66
 
Protective grille upper Deutz D 2807 - D 7807
8%
Protective grille upper Deutz D 2807 - D 7807
€226,01 €186,79 €207,93 €171,84
 
Bosch/Rexroth Hydraulic pump 11 cm³ anticlockwise, claw 17,8 x 8 Deutz-Fahr, Fendt
8%
Bosch/Rexroth
Hydraulic pump 11 cm³ anticlockwise, claw 17,8 x 8 Deutz-Fahr, Fendt
Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 1517222380 | Direction of rotation: A...
€582,33 €481,26 €535,74 €442,76
 
Bosch/Rexroth Hydraulic pump 16 cm³ anticlockwise, taper 1:5, Ø 17 x 17 Deutz-Fahr
8%
Bosch/Rexroth
Hydraulic pump 16 cm³ anticlockwise, taper 1:5, Ø 17 x 17 Deutz-Fahr
Bosch no.: 1517222359 | Direction of rotation: Anticlockwise | Output volume (cc...
€638,00 €527,27 €586,96 €485,09
 
MAHLE Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
40%
MAHLE
Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additional informat...
€326,57 €269,89 €195,60 €161,65
 
LUK Clutch plate 280UKF 26 x 32 mm, 10 splines Deutz-Fahr
8%
LUK
Clutch plate 280UKF 26 x 32 mm, 10 splines Deutz-Fahr
Dimensions (mm): 26 x 32 10 grooves
€225,24 €186,15 €207,22 €171,26
 
Elring Gasket set top and bottom 4 cylinder engine F4L912, F4L913
8%
Elring
Gasket set top and bottom 4 cylinder engine F4L912, F4L913
Additional information: with crankshaft sealing ring / without cylinder head gas...
€187,75 €155,17 €172,73 €142,75
 
FEBI Fuel filter WK842
57%
FEBI
Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
 
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
4%
BOSCH
Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,54 €453,34
 
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
Version: Set of parts.
€20,01 €16,54
 
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€33,53 €27,71
 
SACHS Clutch plate 280, 26 x 32 mm, 10 splines Deutz-Fahr
8%
SACHS
Clutch plate 280, 26 x 32 mm, 10 splines Deutz-Fahr
Dimensions (mm): 26 x 32 10 grooves
€208,33 €172,17 €191,66 €158,40
 
SACHS Thrust bearing 55 x 91 x 22 mm Deutz-Fahr D 6006-D 7807, DX 80-DX 120
8%
SACHS
Thrust bearing 55 x 91 x 22 mm Deutz-Fahr D 6006-D 7807, DX 80-DX 120
Dimensions (mm): 55 x 91 x 22
€215,70 €178,26 €198,44 €164,00
 
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
8%
LUK
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
Dimensions (mm): 20 x 52 x 15
€35,51 €29,35 €32,67 €27,00
 
LUK Clutch plate 250 26 x 32 mm, 10 splines Deutz-Fahr
8%
LUK
Clutch plate 250 26 x 32 mm, 10 splines Deutz-Fahr
Dimensions (mm): 26 x 32 10 grooves
€181,02 €149,60 €166,54 €137,64
 
Double clutch DuT 310/280 36 x 42 mm, 8 splines organic
2%
Double clutch DuT 310/280 36 x 42 mm, 8 splines organic
Material specifications: Organic clutch lining | Additional information: Made in...
€793,63 €655,89 €780,14 €644,74
 
Thrust bearing single PTO clutch 70 x 110 x 20 mm
8%
Thrust bearing single PTO clutch 70 x 110 x 20 mm
Dimensions (mm): 70 x 110 x 20
€36,11 €29,84 €33,22 €27,46
 
Elring Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
8%
Elring
Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary set: For one...
€118,56 €97,98 €109,08 €90,14
 
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
8%
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
€541,43 €447,46 €498,12 €411,67
 
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
8%
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth.
€82,99 €68,59 €76,35 €63,10
 
Oil cooler Fendt GT 380, Deutz-Fahr D 6806 - D 7207
8%
Oil cooler Fendt GT 380, Deutz-Fahr D 6806 - D 7207
€261,18 €215,85 €240,29 €198,58
 
Rocker arm shaft engine FL912, FL913, FL712, FL812 Fendt, Deutz-Fahr
Rocker arm shaft engine FL912, FL913, FL712, FL812 Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL712, FL812.
€15,21 €12,57
 
Fastening hood Deutz-Fahr Series 07-07C, D 2807-7807C
8%
Fastening hood Deutz-Fahr Series 07-07C, D 2807-7807C
€61,44 €50,78 €56,52 €46,71
 
SACHS Thrust bearing 65 x 96 x 23 mm
8%
SACHS
Thrust bearing 65 x 96 x 23 mm
Dimensions (mm): 65 x 96 x 23
€140,56 €116,17 €129,32 €106,87
 
Clutch plate 280, 26 x 32 mm, 10 splines Deutz-Fahr
8%
Clutch plate 280, 26 x 32 mm, 10 splines Deutz-Fahr
Additional information: Made in Germany | Dimensions (mm): 26 x 32, 10 grooves
€179,76 €148,56 €165,38 €136,68
 
Double clutch DuT 295 H-250 36 x 42 mm, 8 splines organic
2%
Double clutch DuT 295 H-250 36 x 42 mm, 8 splines organic
Flywheel dimension (mm): 36 (tief) | Material specifications: Organic clutch lin...
€788,82 €651,92 €775,71 €641,08
 
Track rod 1040 mm, taper 16 - 18 mm Deutz-Fahr D 6806 - D 7007
8%
Track rod 1040 mm, taper 16 - 18 mm Deutz-Fahr D 6806 - D 7007
A (mm): 1040 | G (mm): 16 - 18 | C (mm): 16 - 18
€825,18 €681,97 €759,17 €627,41
 
Elring Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
8%
Elring
Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: FPM (fluoro r...
€70,51 €58,27 €64,87 €53,61
 
Push rod brake cylinder DOT4 Deutz-Fahr
8%
Push rod brake cylinder DOT4 Deutz-Fahr
Medium: DOT4.
€36,41 €30,09 €33,50 €27,68
 
Knott Industrietechnik Brake lining 250 x 70 mm Deutz 6005-7807, DX 3.70-3.90 VC
8%
Knott Industrietechnik
Brake lining 250 x 70 mm Deutz 6005-7807, DX 3.70-3.90 VC
€178,80 €147,77 €164,50 €135,95
 
Master brake cylinder DOT 4 Deutz D 6806-7807, DX 145-160
8%
Master brake cylinder DOT 4 Deutz D 6806-7807, DX 145-160
€445,58 €368,25 €409,93 €338,79
 
Brake shoe Hand brake 180 x 40 mm Deutz
8%
Brake shoe Hand brake 180 x 40 mm Deutz
€52,18 €43,12 €48,01 €39,67
 
VICTOR REINZ Valve cover gasket Deutz engine FL912, FL913, BFL913
VICTOR REINZ
Valve cover gasket Deutz engine FL912, FL913, BFL913
€10,01 €8,27
 
Cooling fan Ø 230 mm, pulley Ø 96 mm, built-in Ø 235 mm Deutz-Fahr
8%
Cooling fan Ø 230 mm, pulley Ø 96 mm, built-in Ø 235 mm Deutz-Fahr
Dimensions: Installation Ø 235, Vane Ø 230, Pulley Ø 96 mm mm.
€1.360,17 €1.124,11 €1.251,36 €1.034,18
 
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, ...
€36,59 €30,24
 
Connecting rod bolt M12 x 1,5 x 55 mm Deutz-Fahr
Connecting rod bolt M12 x 1,5 x 55 mm Deutz-Fahr
Dimensions: M12 x 1.5 x 55 mm.
€31,71 €26,21
 
Sealing ring push rod tube Fendt, Deutz-Fahr
Sealing ring push rod tube Fendt, Deutz-Fahr
Engine types: FL712, FL812.
€1,73 €1,43
 
Manifold gasket exhaust Fendt, Deutz-Fahr
Manifold gasket exhaust Fendt, Deutz-Fahr
Engine types: FL712, FL812.
€4,89 €4,04
 
Bolt set 1ste steering valve 3x M8 x 90
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90.
€18,40 €15,21
 
End control unit single-acting 210 bar, M18 x 1,5 Deutz D 2506 - D 4006
8%
End control unit single-acting 210 bar, M18 x 1,5 Deutz D 2506 - D 4006
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 25 l/m...
€577,76 €477,49 €531,54 €439,29
 
Double hydraulic pump 16 + 11 cm³/rpm., taper 1:5 Ø 17 x 17
8%
Double hydraulic pump 16 + 11 cm³/rpm., taper 1:5 Ø 17 x 17
Output volume: 16 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Bosch no.: 051...
€686,70 €567,52 €631,76 €522,12
 
Showing 49 - 96 of 270

Deutz D 6807 parts for the clutch, engine and steering

Plenty of D 6807 tractors are still doing yard work, loader work and light field jobs. Keeping one going is rarely about big assemblies. It is about the clutch, the bearings, the seals and the steering joints. This page lists more than 250 parts for the Deutz D 6807, from makes including GRANIT, LUK, HELLA, Walterscheid and VICTOR REINZ.

What you can replace

  • Clutch plates, thrust bearings and complete clutch kits, including a closed type release bearing for the driving clutch.
  • Crankshaft seals and sealing rings, for example on the lift shaft.
  • Gaskets such as the exhaust gasket.
  • Alternators and starter motors.
  • Ball joints for the steering, plus a bolt set for the steering valve.
  • Brake shoes and repair kits.
  • Bushes, shims and a replacement tank cap.

Confirming the fit

The type plate on a D 6807 gives the model and serial number, which is how you tell it apart from the closely related tractors in the same family. For shaft seals and bearings, measure the old part, inner diameter, outer diameter and width, and compare. Starters, alternators and clutch plates nearly always carry a manufacturer reference on a plate or stamped into the casing. Write it down before you strip the tractor.

A clutch job done once

Splitting the tractor is the bulk of a clutch repair, so fit a new thrust bearing every time, even if the old one still sounds quiet. A bearing that starts to whine a month later means doing the whole job twice. While the halves are apart, check the rear crankshaft seal as well. A weeping seal will soak a brand new clutch plate in oil before long.

Vague steering is not always the steering box. Have someone rock the wheel from side to side while you watch the front axle. If the ball moves in its socket before the wheel responds, the ball joint is due. Set the toe in again once the new joint is in. When fitting brake shoes, look at the drum too. A scored or worn drum means new linings only make contact on a narrow strip, and always renew shoes axle by axle so the tractor brakes straight.

Sister models in the 07 range

The Deutz D 6207, the Deutz D 6007 and the Deutz D 7007 each have their own page with the parts listed for that model, so order for every tractor from its own page. The full make is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart