Menu
EUR

Tractor parts Deutz-Fahr DX 3.70

Looking for parts for your Deutz-Fahr DX 3.70 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

316 parts found for Deutz-Fahr DX 3.70
Show:
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 520 mm. Joystick con... More
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric....
€1.905,32 €1.574,64 €1.825,85 €1.508,97
You save 4%
Crank for clevis Ø 27 mm, thread M27 x 3 Deutz-Fahr
Dimensions: Ø = 27, Thread = M27 x 3 mm. More
Dimensions: Ø = 27, Thread = M27 x 3 mm.
€424,88 €351,14 €386,80 €319,67
You save 9%
GRANIT Lift rod 680 - 880 mm, ball joint-Ø 28,4 mm Deutz-Fahr
GRANIT
Dimensions: Length = 680 - 880, Ball joint Ø = 28.4, Clevis Ø = 20, Internal dimension of clevis = 25 mm. More
Dimensions: Length = 680 - 880, Ball joint Ø = 28.4, Clevis Ø = 20, ...
€221,91 €183,40 €202,00 €166,94
You save 9%
GRANIT Pin with chain and linch pins top link Ø 19 mm Deutz-Fahr
GRANIT
Dimensions: Ø: 19 mm. More
Dimensions: Ø: 19 mm.
€33,70 €27,85
GRANIT Sealing ring lift shaft left 75 x 90 x 10 mm, NBR Deutz-Fahr
GRANIT
Dimensions: 75 x 90 x 10 mm. Material: NBR. More
Dimensions: 75 x 90 x 10 mm. Material: NBR.
€37,94 €31,36 €34,50 €28,51
You save 9%
Scharmüller Clutch hitches can be disconnected with bracket, 82,4 kN, working length 211 mm
Scharmüller
suitable for: Deutz-Fahr. Series: DX AgroPrima. Category: Hitches. Version: Can be disconnected with bracket. Colour: Black. Overhang: 211 mm. Hole: M... More
suitable for: Deutz-Fahr. Series: DX AgroPrima. Category: Hitches. Ver...
€1.005,21 €830,75 €851,90 €704,05
You save 15%
GRANIT Push button switch hazard lights 12 / 24 V red, with lock
GRANIT
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L- R- 30- 30b- 49a- 15- 49), dustproof and splashproof, With glass soc... More
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6...
€57,83 €47,79 €52,60 €43,47
You save 9%
GRANIT Headlight left / right 12 / 24 V, H4, glass Ø 136 mm, built-in
GRANIT
Bulb: 12V60/55W / H4, 24V75/70W / H4. Installation location: Left, right. Nominal voltage: 12 / 24 V. Test mark: E20. Light function: Dipped beam, ful... More
Bulb: 12V60/55W / H4, 24V75/70W / H4. Installation location: Left, rig...
€152,15 €125,74 €138,50 €114,46
You save 9%
GRANIT Start switch 12 V / 24 V, built-in-Ø 28 mm - 2 keys
GRANIT
To fit as: Case IH 485XL, 585, 585XL, 685, 685XL, 785XL, 885, 885XL 743XL, 745XL, 844XL, 845XL, 856XL 955XL, 1055XL, Deutz-Fahr AgroPrima 4.31, 4.51, ... More
To fit as: Case IH 485XL, 585, 585XL, 685, 685XL, 785XL, 885, 885XL 74...
€48,78 €40,31 €44,40 €36,69
You save 9%
Double clutch DuT 280 CE 36 x 40 mm, 20 splines Deutz-Fahr
Additional information: Made in Germany | Dimensions (mm): 36 x 40, 20 grooves | Material specifications: Sintered clutch lining More
Additional information: Made in Germany | Dimensions (mm): 36 x 40, 20...
€960,23 €793,58 €874,15 €722,44
You save 9%
LUK Thrust bearing PTO clutch 75 x 115 x 20 mm
LUK
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€183,54 €151,69 €167,00 €138,02
You save 9%
Elring Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
Elring
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary set: For one cylinder head | AF (mm): 17 More
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary se...
€118,56 €97,98 €107,90 €89,17
You save 9%
Elring Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
Elring
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: FPM (fluoro rubber) More
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: F...
€70,51 €58,27 €64,15 €53,02
You save 9%
Universal joint 35 x 97 mm, centralised lubrication
A: 35 mm. B: 97 mm. Universal joint size: . Lubrication system: Centralised lubrication. More
A: 35 mm. B: 97 mm. Universal joint size: . Lubrication system: Centra...
€126,01 €104,14 €114,70 €94,79
You save 9%
Repair set brake cylinder DOT4 without piston Deutz-Fahr
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€62,73 €51,84 €57,10 €47,19
You save 9%
Protective cap brake cylinder DOT4 Deutz D 6807C-7807, DX 3.70SC-86
Reservoir DOT4 Deutz-Fahr
Medium: DOT4. More
Medium: DOT4.
€54,71 €45,21 €49,80 €41,16
You save 9%
GRANIT Wheel brake cylinder disc brake rear, DOT 4 Deutz-Fahr
€466,04 €385,16 €424,25 €350,62
You save 9%
GRAMMER Tractor seat air suspended Maximo Professional V2, seat width 530 mm
GRAMMER
To fit: Deutz. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge (mm): 260. Seat width (mm): 530. Joystick co... More
To fit: Deutz. Suspension: Air suspension. Upholstery type: Fabric. Se...
€2.420,80 €2.000,66
Injection nozzle Deutz-Fahr D 2506-10006, DX 80-120, DX 3.10-4.70
Type formula: DLLA149S774, 0433271376. Bosch no.: 2580433271376. More
Type formula: DLLA149S774, 0433271376. Bosch no.: 2580433271376.
€45,49 €37,60 €41,40 €34,21
You save 9%
Shim 1,5 mm liner Top, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,5 mm. More
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,5 mm.
€12,80 €10,58
Shim 1,45 mm liner Top, Ø 120 x 102,6 mm
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,45 mm. More
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,45 mm.
€12,15 €10,04
Showing 121 - 144 of 316

Parts for your Deutz-Fahr DX 3.70 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 3.70. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 3.70. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 3.70. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart