Menu
EUR

Tractor parts Deutz-Fahr DX 6.05

Looking for parts for your Deutz-Fahr DX 6.05 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

320 parts found for Deutz-Fahr DX 6.05
Show:
GRANIT Door lock, left Case IH CX 50, MX 90C, Deutz-Fahr D 4507C, DX 7.10
€99,61 €82,32 €90,65 €74,92
You save 9%
GRANIT Protective ring front left lift arm 90 x 75 x 10 mm Deutz-Fahr
GRANIT
Dimensions: 90 x 75 x 10 mm. More
Dimensions: 90 x 75 x 10 mm.
€33,59 €27,76 €30,55 €25,25
You save 9%
GRANIT Inner ring front right lift arm 70 x 84 x 1 mm Deutz-Fahr
GRANIT
Dimensions: 70 x 84 x 1 mm. More
Dimensions: 70 x 84 x 1 mm.
€53,35 €44,09 €48,55 €40,12
You save 9%
O-ring for oil dipstick 30 x 3,5 mm Deutz-Fahr
Dimensions: 30 x 3.5 mm. More
Dimensions: 30 x 3.5 mm.
€16,00 €13,22
GRANIT Lift rod 485 mm, M27 x 3, hole spacing 178 mm Deutz-Fahr
GRANIT
Dimensions: Length = 485, Thread = M27 x 3, Hole spacing = 178 mm. Thread: M27 x 3 mm. Length: 485 mm. More
Dimensions: Length = 485, Thread = M27 x 3, Hole spacing = 178 mm. Thr...
€252,40 €208,60 €229,75 €189,88
You save 9%
GRANIT Pto switch PTO clutch M14 x 1, 12 V / 24 V, make contact
GRANIT
Version: Make contact, mechanical, Thread M14 x 1 with 2 hexagon nuts (AF 19), Operating voltage: 12 V/24 V, Blade terminal. Menke no.: 80804. More
Version: Make contact, mechanical, Thread M14 x 1 with 2 hexagon nuts ...
€33,75 €27,89 €30,70 €25,37
You save 9%
GRANIT Push button switch work lamp 12 / 24 V, button yellow, Ø 30 mm
GRANIT
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (31- S1- S- +), Dustproof and splashproof, With glass socket bulb 12... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminal...
€40,96 €33,85 €37,25 €30,79
You save 9%
GRANIT Push button switch four-wheel drive 12/24 V, yellow, 31-S-S1-+
GRANIT
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (31 - S - S1 - +), dustproof and splashproof, With glass socket bulb... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminal...
€39,39 €32,55 €35,85 €29,63
You save 9%
GRANIT Push button switch work lamp 12 / 24 V, button yellow, 4 blade terminals
GRANIT
To fit as: Deutz-Fahr AgroCompact 3.30 V/F, 3.50, 3.50 S, 3.50 V/F, 3.70 V/F, 3.90 F, 3.90 S AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16 AgroXtra 3.57, 4.0... More
To fit as: Deutz-Fahr AgroCompact 3.30 V/F, 3.50, 3.50 S, 3.50 V/F, 3....
€34,65 €28,64 €31,50 €26,03
You save 9%
Cobo Indicator/position light left / right 120 x 80 x 56 mm, P21W, R5W
Cobo
To fit as: Deutz-Fahr AgroCompact 3.30 F/V, 3.50 V/F/S, 3.70 F/V, 3.90 F/S, AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16, AgroXtra 3.57, 4.07, 4.17, 4, 47, ... More
To fit as: Deutz-Fahr AgroCompact 3.30 F/V, 3.50 V/F/S, 3.70 F/V, 3.90...
€35,65 €29,46
Clutch master cylinder Ø 25,4 mm gray cast iron Deutz-Fahr
Material: Grey cast iron | Hole Ø (mm): 25.4 More
Material: Grey cast iron | Hole Ø (mm): 25.4
€280,27 €231,63 €255,15 €210,87
You save 9%
GRANIT Elastic clutch chain pitch Ø 80 mm, 6x bore Ø 12 mm Deutz-Fahr
GRANIT
Version: PCD: 80 mm, 6x hole Ø 12 mm More
Version: PCD: 80 mm, 6x hole Ø 12 mm
€478,24 €395,24 €435,35 €359,79
You save 9%
SACHS Thrust bearing 65 x 96 x 23 mm
SACHS
Dimensions (mm): 65 x 96 x 23 More
Dimensions (mm): 65 x 96 x 23
€140,56 €116,17 €127,95 €105,74
You save 9%
GRANIT Clutch plate 280, 31 x 36 mm, 16 splines Deutz-Fahr
GRANIT
Dimensions (mm): 31 x 36, 16 grooves | Additional information: Made in Germany More
Dimensions (mm): 31 x 36, 16 grooves | Additional information: Made in...
€145,49 €120,24 €132,45 €109,46
You save 9%
Thrust bearing closed version 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€134,70 €111,32 €122,60 €101,32
You save 9%
Alternator 14 V, 55 A, flange 56 mm, Deutz-Fahr, Fendt
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values (V / A): 14 / 55 | Flange size (mm): 56,0 | Installation angle (°): l 60 | Pull... More
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values ...
€161,58 €133,54 €147,00 €121,49
You save 9%
BOSCH Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
€512,28 €423,37 €493,35 €407,73
You save 4%
GRANIT Universal joint 30 x 92 mm, lateral lubrication
GRANIT
A: 30 mm. B: 92 mm. Universal joint size: . Lubrication system: Lateral lubrication. More
A: 30 mm. B: 92 mm. Universal joint size: . Lubrication system: Latera...
€70,24 €58,05 €63,90 €52,81
You save 9%
Cross journal 30 x 92 mm, maintenance-free
A: 30 mm. B: 92 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 30 mm. B: 92 mm. Universal joint size: . Lubrication system: Mainte...
€118,81 €98,19 €108,15 €89,38
You save 9%
Repair set brake cylinder DOT4 Deutz-Fahr
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€46,06 €38,07 €41,90 €34,63
You save 9%
LUK Pilot bearing 20 x 52 x 15 mm
LUK
Dimensions: 20 x 52 x 15 mm. More
Dimensions: 20 x 52 x 15 mm.
€32,83 €27,13 €32,45 €26,82
You save 1%
GRANIT Repair set foot brake ATE version Deutz-Fahr DX
€48,84 €40,36 €44,45 €36,74
You save 9%
GRANIT Brake caliper ATE bottom left, DOT 4, without brake pads
GRANIT
Description: Bottom left, Suitable brake pad set 71704019. More
Description: Bottom left, Suitable brake pad set 71704019.
€922,99 €762,80 €840,25 €694,42
You save 9%
Fixed caliper, complete ATE bottom right, DOT 4, without brake pads
Description: Suitable brake pad set 71704019. More
Description: Suitable brake pad set 71704019.
€991,80 €819,67 €902,90 €746,20
You save 9%
Showing 217 - 240 of 320

Parts for your Deutz-Fahr DX 6.05 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 6.05. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 6.05. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 6.05. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart