Menu
EUR

Tractor parts Deutz-Fahr DX 6.05

Looking for parts for your Deutz-Fahr DX 6.05 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

320 parts found for Deutz-Fahr DX 6.05
Show:
MANN-FILTER Filter set engine oil, fuel, air, air inner
MANN-FILTER
To fit: Deutz. To fit type: Agrotron. Set consisting of: Engine oil filter, Main fuel filter, Air filter, Secondary element. More
To fit: Deutz. To fit type: Agrotron. Set consisting of: Engine oil fi...
€133,61 €110,42 €80,00 €66,12
You save 40%
Fan built-in-Ø 290 mm, impeller-Ø 274 mm Deutz-Fahr
Dimensions: Installation Ø 290, Vane Ø 274, Pulley Ø 125 mm. More
Dimensions: Installation Ø 290, Vane Ø 274, Pulley Ø 125 mm.
€868,91 €718,11 €791,00 €653,72
You save 9%
Brass nut exhaust manifold M8, height 10 mm Deutz-Fahr
Version: Thread M8, Height: 10 mm. Thread: M8. More
Version: Thread M8, Height: 10 mm. Thread: M8.
€7,55 €6,24
GRANIT Valve spring engine F2L912-F6L913, BF6L913 Deutz-Fahr, Fendt
GRANIT
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€11,45 €9,46
Shim 0,5 mm liner Bottom, Ø 117,6 x 112 mm Fendt, Deutz-Fahr
Outer Ø: 117,6 mm. Inner Ø: 112 mm. Material: Steel. Thickness: 0,5 mm. More
Outer Ø: 117,6 mm. Inner Ø: 112 mm. Material: Steel. Thickness: 0,5 ...
€3,44 €2,84
Shim cylinder liner 0,2 mm, Ø 117,6 x 110,1 mm Deutz-Fahr
Outer Ø: 117,6 mm. Inner Ø: 110,1 mm. Material: Steel. Thickness: 0,2 mm. More
Outer Ø: 117,6 mm. Inner Ø: 110,1 mm. Material: Steel. Thickness: 0,...
€2,71 €2,24
GRANIT Bolt set 3de steering valve M10 x 190 Deutz-Fahr
GRANIT
Technical data: M10 x 190. More
Technical data: M10 x 190.
€35,35 €29,21
Bolt set 2de steering valve M10 x 150 Deutz-Fahr
Technical data: M10 x 150. More
Technical data: M10 x 150.
€25,25 €20,87
Steering valve dw afgedicht 210 bar, 70 l/min, system SD80
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 70 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 130... More
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: m...
€759,50 €627,69 €691,40 €571,41
You save 9%
GRANIT Door lock, right Deutz-Fahr AgroPrima 4.31, DX 7.10
€76,54 €63,26 €69,65 €57,56
You save 9%
GRANIT Handle right Deutz-Fahr DX 4.10-160, Series DX 4-7
€139,39 €115,20 €126,90 €104,88
You save 9%
GRANIT Inner ring front left lift arm 75 x 88,6 x 1 mm Deutz-Fahr
GRANIT
Dimensions: 75 x 88.6 x 1 mm. More
Dimensions: 75 x 88.6 x 1 mm.
€49,68 €41,06 €45,20 €37,36
You save 9%
Protective ring front right lift arm 85 x 70 x 10 mm Deutz-Fahr
Dimensions: 85 x 70 x 10 mm. More
Dimensions: 85 x 70 x 10 mm.
€34,72 €28,69 €31,60 €26,12
You save 9%
Sealing ring piston 84 x 88 x 1,5 mm Deutz-Fahr
Dimensions: 84 x 88 x 1.5 mm. More
Dimensions: 84 x 88 x 1.5 mm.
€33,20 €27,44
Sealing ring piston 88 x 3 mm Deutz-Fahr
Dimensions: 88 x 3 mm. More
Dimensions: 88 x 3 mm.
€34,60 €28,60
GRANIT Pin 20 x 105 mm Deutz-Fahr
GRANIT
Dimensions: 20 x 105 mm. More
Dimensions: 20 x 105 mm.
€55,75 €46,07 €50,70 €41,90
You save 9%
Push button switch windshield wiper 12/24 V, button yellow, Ø 30 mm
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 5 blade terminals 6.3 x 0.8 (+- 53a- 53- 31b- 31), Dustproof and splashproof, With glass socket ... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 5 blade terminal...
€41,28 €34,12 €37,55 €31,03
You save 9%
HELLA Glass rear light right, 4 light functions, with red spare lens
HELLA
To fit as: Deutz-Fahr DX 3 V/F/S 3.10, 3.30, 3.50, 3.70, 3.90, DX 4.10, 4.30, 4.50, 4.70, 6.05, 6.10, 6.30, 6.50, 7.10, DX 3.10SC, 3.30, 3.50, 3.60, 3... More
To fit as: Deutz-Fahr DX 3 V/F/S 3.10, 3.30, 3.50, 3.70, 3.90, DX 4.10...
€18,00 €14,88
LUK Double clutch 310/310TGU 41 x 45 mm, 21 splines sintered Deutz-Fahr
LUK
Material specifications: Sintered clutch lining | Dimensions (mm): 41 x 45, 21 grooves More
Material specifications: Sintered clutch lining | Dimensions (mm): 41 ...
€1.194,07 €986,83 €1.087,00 €898,35
You save 9%
Scharmüller Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
Scharmüller
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota grey | Guide width (mm): 32 | Load capacity (kg): 1500 | Category: Bearing support... More
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota gr...
€1.378,56 €1.139,31 €1.327,65 €1.097,23
You save 4%
SACHS Clutch plate 330, 44 x 48 mm, 22 splines sintered Deutz-Fahr
SACHS
Dimensions (mm): 44 x 48 22 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 44 x 48 22 grooves | Material specifications: Sintere...
€795,65 €657,56 €724,35 €598,64
You save 9%
LUK Thrust bearing PTO shaft 70 x 110 x 20 mm
LUK
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€116,29 €96,11 €114,80 €94,88
You save 1%
LUK Clutch plate 44 x 48 mm, 22 splines Deutz-Fahr AgroStar 4.61 - 6.38
LUK
Dimensions (mm): 44 x 48 22 grooves More
Dimensions (mm): 44 x 48 22 grooves
€694,97 €574,36 €632,70 €522,89
You save 9%
Showing 289 - 312 of 320

Parts for your Deutz-Fahr DX 6.05 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 6.05. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 6.05. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 6.05. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart