Menu
EUR

Deutz-Fahr DX 6.50 tractor parts & technical data

More than 250 parts are listed for the Deutz-Fahr DX 6.50, a tractor from the DX 6 series. Trailer couplings, lighting and electrics are some of the groups.

271 parts found for Deutz-Fahr DX 6.50
Show:
Bleed valve ATE version DOT4 Deutz
€16,03 €13,24
Brake disc Ø 315 mm, 22 mm thick, 8-hole, for cardan shaft Deutz-Fahr
€401,01 €331,41 €368,93 €304,90
You save 8%
PTO shaft end piece 335 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
Version: Length 335 mm, 1 3/8", 6 grooves, For 540 rpm. More
Version: Length 335 mm, 1 3/8", 6 grooves, For 540 rpm.
€509,31 €420,92 €468,57 €387,24
You save 8%
VICTOR REINZ Crankshaft seal for Ø 65 x 85 x 10,5 mm engine FL912, FL913 Deutz-Fahr
€37,37 €30,88 €34,38 €28,41
You save 8%
VICTOR REINZ Crankshaft seal rear Fendt, Deutz-Fahr
€42,88 €35,44 €39,45 €32,60
You save 8%
Crankshaft seal rear outer-Ø 130 mm, inner-Ø 110 mm, width 13 mm
Outer Ø: 130 mm. Width: 13 mm. Inner Ø: 110 mm. More
Outer Ø: 130 mm. Width: 13 mm. Inner Ø: 110 mm.
€26,36 €21,79
Piston ring set 4 rings, Ø 102 mm, 3/2,5/2,5/5 mm Deutz-Fahr
Dimensions: 4 rings, Ø 102 mm, 3 mm (trapezoidal ring) / 2.5 mm / 2.5 mm / 5 mm. Menke no.: 59629. More
Dimensions: 4 rings, Ø 102 mm, 3 mm (trapezoidal ring) / 2.5 mm / 2.5...
€44,72 €36,96 €41,14 €34,00
You save 8%
Cover engine Deutz FL812-FL913
Engine types: FL912, FL913, FL812. More
Engine types: FL912, FL913, FL812.
€12,56 €10,38
O-ring oil pump 14,5 x 3 mm Fendt, Renault, Deutz-Fahr
Dimensions: 14.5 x 3 mm. More
Dimensions: 14.5 x 3 mm.
€8,25 €6,82
Connecting rod bush Ø 40 mm Deutz-Fahr
Engine types: FL812, FL912. Dimensions: BF4L913, BF6L913. More
Engine types: FL812, FL912. Dimensions: BF4L913, BF6L913.
€10,95 €9,05
Valve spring engine F2L912-F6L913, BF6L913 Deutz-Fahr, Fendt
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€11,95 €9,88
Push rod Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL812, F712. More
Engine types: FL912, FL913, FL812, F712.
€60,95 €50,37 €56,07 €46,34
You save 8%
Valve cover bolt sealing ring nylon, Ø 16 x 8 mm, thickness 3,7 mm
Engine types: FL712, FL812. Outer Ø: 16 mm. Form: Asymmetrical. Inner Ø: 8 mm. Material: Nylon. Thickness: 3,7 mm. More
Engine types: FL712, FL812. Outer Ø: 16 mm. Form: Asymmetrical. Inner...
€1,63 €1,34
Shim liner Top 1,1 mm, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Form: A form. Inner Ø: 102,6 mm. Material: steel. Thickness: 1,1 mm. More
Outer Ø: 120 mm. Form: A form. Inner Ø: 102,6 mm. Material: steel. T...
€4,75 €3,93
Shim 0,5 mm liner Bottom, Ø 117,6 x 112 mm Fendt, Deutz-Fahr
Outer Ø: 117,6 mm. Inner Ø: 112 mm. Material: Steel. Thickness: 0,5 mm. More
Outer Ø: 117,6 mm. Inner Ø: 112 mm. Material: Steel. Thickness: 0,5 ...
€3,59 €2,96
Shim cylinder liner 0,2 mm, Ø 117,6 x 110,1 mm Deutz-Fahr
Outer Ø: 117,6 mm. Inner Ø: 110,1 mm. Material: Steel. Thickness: 0,2 mm. More
Outer Ø: 117,6 mm. Inner Ø: 110,1 mm. Material: Steel. Thickness: 0,...
€2,83 €2,33
Cylinder head gasket set engine FL912, FL913, BFL913 Fendt, Deutz-Fahr, Linde
Engine types: FL912, FL913, BFL913. Supplementary set: For one cylinder head. Additional information: Without cylinder head gasket. More
Engine types: FL912, FL913, BFL913. Supplementary set: For one cylinde...
€19,35 €15,99
Connecting rod bearing standard, Ø 66 mm Deutz-Fahr
Dimensions: Ø 66 mm mm. More
Dimensions: Ø 66 mm mm.
€22,34 €18,46
Connecting rod bolt M12 x 1,5 x 65 mm Fendt, Deutz-Fahr
Engine types: FL913, BFL913. Dimensions: M12 x 1.5 x 65 mm. More
Engine types: FL913, BFL913. Dimensions: M12 x 1.5 x 65 mm.
€23,13 €19,11
Valve seat ring outlet valve Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€28,38 €23,45
Valve cover gewelfd Fendt, Deutz-Fahr
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€32,10 €26,53
Bolt set 3de steering valve M10 x 190 Deutz-Fahr
Technical data: M10 x 190. More
Technical data: M10 x 190.
€36,94 €30,53
Bolt set 1ste steering valve M10 x 100 Deutz-Fahr
Technical data: M10 x 100. More
Technical data: M10 x 100.
€16,33 €13,49
Single pump 16,8 cm³/rpm., taper 1:5, Ø 17 x 17, left
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 45 mm. B: 107,5 mm. Direction of rotation: Anticlockwise. Line connection suction s... More
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 45 ...
€232,74 €192,35 €214,12 €176,96
You save 8%
Double hydraulic pump 22,5 + 16 cm³/rpm., 9 teeth, B 17 x 14
Output volume: 22,5 + 16 cc/rev. Drive shaft: Splined shaft 9 splines, 17 x 14. Bosch no.: 0510765337. More
Output volume: 22,5 + 16 cc/rev. Drive shaft: Splined shaft 9 splines,...
€494,76 €408,89 €455,18 €376,18
You save 8%
Door lock, right Case IH CX 50, MX 90C, Deutz-Fahr D 4507C, Intrac 2004
Handle right and left Deutz-Fahr Actor 5510, Topliner 4090
€152,40 €125,95 €140,21 €115,87
You save 8%
Replacement key lock number 1012
Locking number: 1012. More
Locking number: 1012.
€38,75 €32,02
Inner ring front right lift arm 70 x 84 x 1 mm Deutz-Fahr
Dimensions: 70 x 84 x 1 mm. More
Dimensions: 70 x 84 x 1 mm.
€53,35 €44,09 €49,08 €40,56
You save 8%
Sealing ring piston 88 x 3 mm Deutz-Fahr
Dimensions: 88 x 3 mm. More
Dimensions: 88 x 3 mm.
€36,14 €29,87
Gas strut roof window or windshield 200 N, 255 mm Deutz-Fahr
suitable for: Dachluke oder Frontscheibe. Newtons: 200. A: 255 mm. B: 125 mm. C: 8 mm. D: 6 mm. Form: 8. To fit: roof hatch or windscreen. More
suitable for: Dachluke oder Frontscheibe. Newtons: 200. A: 255 mm. B: ...
€48,95 €40,45 €45,03 €37,22
You save 8%
Walterscheid Piton Fix rail width 309 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.723,50 €1.424,38 €1.362,61 €1.126,13
You save 21%
Walterscheid Shunting hitch coupling pin 35 mm, hole pattern 140 x 80 mm
Walterscheid
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colour: black. Trailer load: 25000 kg. No. of holes: 4. Description: Towing coupling... More
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colo...
€276,01 €228,11 €218,22 €180,35
You save 21%
Drive shaft 2130 mm, M18 x 1,5 / M22 x 1,5
Version: Thread: M18 x 1.5 / M22 x 1.5. More
Version: Thread: M18 x 1.5 / M22 x 1.5.
€194,70 €160,91 €179,12 €148,04
You save 8%
MANN-FILTER Fuel filter WK842
€18,79 €15,53
Bleed valve M7 x 1 x 16 mm Deutz-Fahr
Dimensions: M7 x 1 x 16 mm. To fit: 71704081. Version: Can be used for any vehicle. More
Dimensions: M7 x 1 x 16 mm. To fit: 71704081. Version: Can be used for...
€45,90 €37,93 €43,98 €36,35
You save 4%
Repair set brake cylinder without piston Deutz DX 80-250
Additional information: Without piston. More
Additional information: Without piston.
€49,66 €41,04 €45,69 €37,76
You save 8%
Brake disc Ø 284 mm, 22 mm thick, 8-hole, for cardan shaft Deutz-Fahr
Repair set brake cylinder without piston Valtra-Valmet, Deutz-Fahr
Additional information: Without piston. More
Additional information: Without piston.
€44,94 €37,14 €41,34 €34,17
You save 8%
Flywheel 129 teeth Deutz-Fahr
Number of teeth: 129. More
Number of teeth: 129.
€2.160,96 €1.785,92 €1.988,08 €1.643,04
You save 8%
KS Connecting rod bearing Ø 66 mm, width 25 mm Deutz-Fahr, Fendt
KS
Dimensions: Ø 66 mm, Width 25 mm. More
Dimensions: Ø 66 mm, Width 25 mm.
€39,23 €32,42
Turbocharger mounting kit Fendt, Deutz-Fahr
Contents: 1x turbine inlet gasket, 1x turbine outlet gasket, 1x oil inlet gasket, 1x oil outlet gasket, 4x stud bolt, 4x copper-plated nut. More
Contents: 1x turbine inlet gasket, 1x turbine outlet gasket, 1x oil in...
€130,62 €107,95 €120,17 €99,31
You save 8%
Valve cover gasket engine FL912, FL913, BFL913 Fendt, Deutz-Fahr, Linde
Showing 193 - 240 of 271

Deutz-Fahr DX 6.50 parts: cab, hitch, engine and hydraulics

On a DX 6.50 with a lot of hours behind it, the first complaints usually come from the cab. A door lock that no longer catches, a gas strut that will not hold the rear window, a push button for the work lamps that sticks. This page covers those small jobs and the larger ones too, with more than 250 Deutz-Fahr DX 6.50 parts.

In the cab

There are push button switches, gas struts for the door, front window and rear window, door locks and air suspended tractor seats. Fit a gas strut with the piston rod pointing down. That keeps the seal inside bathed in oil, and the strut holds its force for longer.

At the back

For towing there are automatic drawbars and drawbar frames from makers such as Walterscheid and ROCKINGER. On a hitch that has seen years of use, check the locking mechanism and the coupling pin for wear as well, not just the jaw.

Engine, lift and brakes

  • Crankshaft seals for both ends of the crank.
  • Piston ring sets and seal kits for an engine rebuild.
  • Sealing rings for the lift shaft and a gasket for the lift housing.
  • Seals for the hydraulic pump and shims for setting end play.
  • Repair sets for the brake cylinder.
  • Vented tank caps, including lockable versions.

Before fitting a brake cylinder repair set, look at the cylinder bore. If it is scored or pitted, new seals will not stop the leak, and the whole cylinder needs replacing instead. With the crankshaft seals, take care not to fit the new seal on the exact groove the old lip has worn into the shaft.

When the engine dies with fuel in the tank

A blocked vent in the tank cap lets vacuum build up as fuel is drawn off. After a while the engine starves and stops, even with a full tank. Before you suspect the lift pump, try running with the cap loosened. If the engine keeps going, a new vented cap solves it.

Finding the matching part

Your type plate should read DX 6.50. For seals, shims and sealing rings it all comes down to size, and the quickest way to get that is from the old part, which often has a reference number moulded or stamped into it. Besides GRANIT, Walterscheid and ROCKINGER, you will find PROBOSS and GRAMMER here. Other tractors from the brand are on Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart