Menu
EUR

Tractor parts Deutz-Fahr DX 85

Looking for parts for your Deutz-Fahr DX 85 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

269 parts found for Deutz-Fahr DX 85
Show:
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor More
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Ze...
€183,88 €151,97 €167,35 €138,31
You save 9%
Replacement key lock number 14610 - 2 pieces
Locking number: 14610. Version: Locking no. 14610. More
Locking number: 14610. Version: Locking no. 14610.
€15,00 €12,40
Alternator 14 V / 33 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holder, Renault, Schlüter More
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holde...
€197,74 €163,42 €180,00 €148,76
You save 9%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €272,80 €225,45
You save 9%
Mirror black unheated 310 x 220 mm, rod Ø 16 - 18 mm
Tractor types: Deutz DX 80, 85, 86, 90, 92, 110, 120, 140, 145, 160, 230, 250, 3.10, 3.30, 3.50, 3.60, 3.65, 3.70, 3.80, 3.90, 4.10, 4.30, 4.50, 4.70,... More
Tractor types: Deutz DX 80, 85, 86, 90, 92, 110, 120, 140, 145, 160, 2...
€48,95 €40,45
LUK Thrust bearing 55 x 90,5 x 22 mm
LUK
Dimensions (mm): 55 x 90.5 x 22 More
Dimensions (mm): 55 x 90.5 x 22
€192,19 €158,83 €174,95 €144,59
You save 9%
Piston set, complete Ø 100 mm, combustion chamber 55 mm
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 55 mm, Combustion chamber depth 15.6 mm. More
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion ...
€152,40 €125,95 €138,70 €114,63
You save 9%
Steering valve ew/dw 220 bar, 60 l/min, system SD60 Deutz
This control valve has been specially developed for Deutz tractors with SD60 hydraulics. Thanks to the high output up to four pieces can be flanged di... More
This control valve has been specially developed for Deutz tractors wit...
€663,73 €548,54 €604,25 €499,38
You save 9%
Window rubber 27,1 x 14,5 mm, clamping range 4 - 6 mm - 5 meter
Clamping range (mm): 4 - 6. Length (m): 5. W (mm): 27.1. H (mm): 14.5. More
Clamping range (mm): 4 - 6. Length (m): 5. W (mm): 27.1. H (mm): 14.5.
€58,54 €48,38 €53,25 €44,01
You save 9%
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustment, longitudinal adjustment and backrest tilt adjustment. Mechanical ... More
Air suspension with 12V compressor. Fore/aft isolator. Continuous heig...
€827,03 €683,50 €792,55 €655,00
You save 4%
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
Stabilus
To fit as: Deutz Door, windscreen or rear screen More
To fit as: Deutz Door, windscreen or rear screen
€47,75 €39,46 €43,45 €35,91
You save 9%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,20 €40,66
You save 9%
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,50 €453,31
You save 4%
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit. More
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Co...
€27,90 €23,06
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.104,81 €913,07 €873,45 €721,86
You save 21%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.146,48 €1.773,95 €1.697,00 €1.402,48
You save 21%
AKS-Dasis Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
AKS-Dasis
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 12 | Additional information: Cylinder head ID: B Inlet: 19.1 mm Outlet: 22.2 mm |... More
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 1...
€504,50 €416,94 €459,25 €379,55
You save 9%
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
€19,15 €15,83
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 26 mm. Menke no.: 45815. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€35,00 €28,93
Wiper motor with switch 12 V, 135°, M12 x 1
With integrated switch. More
With integrated switch.
€127,48 €105,36 €116,00 €95,87
You save 9%
Drive shaft 1050 mm Deutz-Fahr DX 80 - 120, DX 4.10 - 6.05
€992,43 €820,19 €903,50 €746,69
You save 9%
LUK Clutch kit Deutz-Fahr DX 85 - DX 90
LUK
Contents: Pressure plate 458230000911, clutch plate 458328011616 More
Contents: Pressure plate 458230000911, clutch plate 458328011616
€1.299,25 €1.073,76 €1.247,20 €1.030,74
You save 4%
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€662,73 €547,71 €396,90 €328,02
You save 40%
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€80,43 €66,47 €77,45 €64,01
You save 4%
Alternator 14 V / 35 A, flange 56 mm, pulley Ø 68 mm, W-connection
Additional information: with W connection | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Installation angle (°): l 60 | Charging current (A): 35 | Fo... More
Additional information: with W connection | Mounting L / d / R (mm): 5...
€122,13 €100,93 €111,15 €91,86
You save 9%
Filter dryer airco 229 mm, Ø 76 mm, #6 3/8 o-ring Deutz-Fahr, Fendt
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection thread E: 3/8"" | Connection thread A: 3/8"" | Connection thread: 10 | Outer Ø... More
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection...
€60,62 €50,10 €55,15 €45,58
You save 9%
Alternator 14 V / 95 A, flange 56 mm
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Form: B | Flange size (mm): 56,0 | Nominal values (V / A): 1... More
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | ...
€193,94 €160,28 €176,55 €145,91
You save 9%
Rivet copper 5 x 10 mm, DIN 7338-B - 100 pieces
Hole Ø: 5 mm. Length: 10 mm. d2: 9,5 mm. K: 1 mm. e: 2,5 mm. Material: Copper. DIN: 7338-B. More
Hole Ø: 5 mm. Length: 10 mm. d2: 9,5 mm. K: 1 mm. e: 2,5 mm. Material...
€50,38 €41,64 €47,95 €39,63
You save 5%
Temperature warning switch 12 V, M10, flat head
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperature: - °C. More
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperat...
€108,59 €89,74 €98,85 €81,69
You save 9%
Clutch kit flywheel 3 mm raised Deutz, Deutz-Fahr
To fit as: Deutz DX 80, DX 85, DX 86, DX 90, DX 92, DX 110, DX 120, DX 4.10, DX 4.30, DX 4.50, DX 4.70, DX 6.05, DX 6.10, DX 6.30, AgroP... More
To fit as: Deutz DX 80, DX 85, DX 86, DX 90, DX 92, DX 110, DX 1...
€1.197,33 €989,53 €1.090,00 €900,83
You save 9%
Return spring for brake shoe Ø 10 mm, length 83 mm Deutz 3006-6206
To fit as: Deutz 3006, 4006, 5206, 6206 More
To fit as: Deutz 3006, 4006, 5206, 6206
€6,45 €5,33
Bosch/Rexroth Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
Bosch/Rexroth
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole pattern (mm): 60 x 60 (2 x) | Operating pressure max. (bar): 220 | Bosch no.: 151722... More
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole patt...
€653,73 €540,27 €595,15 €491,86
You save 9%
AKS-Dasis Blower switch 3 link steps Deutz-Fahr DX 4.10 - DX 120
AKS-Dasis
Equipment: 3 switching stages More
Equipment: 3 switching stages
€43,95 €36,32 €40,00 €33,06
You save 9%
HELLA Alternator 14 V, 33 A Case IH, Deutz-Fahr, John Deere
HELLA
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal v...
€354,91 €293,31 €273,40 €225,95
You save 23%
Hydraulic cylinder Deutz-Fahr DX 6.05-250, Series DX 6-7
€1.361,03 €1.124,82 €1.239,00 €1.023,97
You save 9%
Walterscheid Flange hitch automatic bolt 38 mm, 140 x 80 mm, M17, 2000 kg
Walterscheid
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value: 65 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Connecting pin:... More
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 k...
€1.582,08 €1.307,50 €1.250,80 €1.033,72
You save 21%
Seal tank cap Deutz-Fahr
Rocker arm shaft engine FL912, FL913, FL712, FL812 Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL712, FL812. More
Engine types: FL912, FL913, FL712, FL812.
€14,55 €12,02
Manifold gasket exhaust Fendt, Deutz-Fahr
Engine types: FL712, FL812. More
Engine types: FL712, FL812.
€4,69 €3,88
Wiper motor without integrated switch 12 V, 135°, M12 x 1
Volts: 12. W: konisch 8 x M6 mm. Angle: 135 °. A: 53 mm. B: 34 mm. C: 28 mm. D: M12 x 1 mm. E: 6 mm. F: M8 mm. G: 50-57 mm. Wiper blade length max.: ... More
Volts: 12. W: konisch 8 x M6 mm. Angle: 135 °. A: 53 mm. B: 34 mm. C:...
€145,99 €120,65 €132,90 €109,83
You save 9%
Angle drive transmission 1:1, 1x M18 x 1,5, 1x M22 x 1,5
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5. More
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5.
€163,89 €135,45 €149,20 €123,31
You save 9%
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.071,98 €1.712,38 €1.638,10 €1.353,80
You save 21%
Track rod 1340 mm, taper 23 - 26 mm Deutz-Fahr DX 85, DX 90
C (mm): 23 - 26 | A (mm): 1340 | G (mm): 23 - 26 More
C (mm): 23 - 26 | A (mm): 1340 | G (mm): 23 - 26
€1.158,13 €957,13 €1.054,35 €871,36
You save 9%
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ring | Dimensions (mm): - | Material: Steel More
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ri...
€65,38 €54,03 €59,50 €49,17
You save 9%
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
MAHLE
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dust-tight, with fan | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Cha... More
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional info...
€334,90 €276,78 €200,55 €165,74
You save 40%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€595,84 €492,43 €459,00 €379,34
You save 23%
Showing 1 - 48 of 269

Parts for your Deutz-Fahr DX 85 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 85. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 85. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 85. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart