Menu
EUR

Tractor parts Deutz-Fahr DX 86

Looking for parts for your Deutz-Fahr DX 86 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

261 parts found for Deutz-Fahr DX 86
Show:
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.820,72 €1.504,73 €1.439,45 €1.189,63
You save 21%
Rivet copper 5 x 12 mm, DIN 7338-B - 100 pieces
Hole Ø: 5 mm. Length: 12 mm. d2: 9,5 mm. K: 1 mm. e: 2,5 mm. Material: Copper. DIN: 7338-B. More
Hole Ø: 5 mm. Length: 12 mm. d2: 9,5 mm. K: 1 mm. e: 2,5 mm. Material...
€60,65 €50,12
PROBOSS Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment. Longitudinal adjustment. Backrest tilt adjustment. Lumbar support. Adjustabl... More
Air suspension with 12V compressor. Fore/aft isolator. Height adjustme...
€1.299,25 €1.073,76 €1.245,00 €1.028,93
You save 4%
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.071,98 €1.712,38 €1.638,10 €1.353,80
You save 21%
Bosch/Rexroth Hydraulic pump 11 cm³/rpm., claw 17,8 x 8, left Deutz-Fahr
Bosch/Rexroth
Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 | Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 1517222715 More
Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 | Dr...
€469,70 €388,18 €427,60 €353,39
You save 9%
Filter dryer airco 229 mm, Ø 76 mm, #6 3/8 o-ring Deutz-Fahr, Fendt
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection thread E: 3/8"" | Connection thread A: 3/8"" | Connection thread: 10 | Outer Ø... More
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection...
€60,62 €50,10 €55,15 €45,58
You save 9%
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
LUK
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€35,51 €29,35 €32,30 €26,69
You save 9%
HELLA Alternator 14 V, 33 A Case IH, Deutz-Fahr, John Deere
HELLA
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal v...
€354,91 €293,31 €273,40 €225,95
You save 23%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
MAHLE Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
€699,35 €577,98 €418,85 €346,16
You save 40%
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€662,73 €547,71 €396,90 €328,02
You save 40%
Brake shoe Hand brake 180 x 40 mm Deutz
€52,18 €43,12 €47,50 €39,26
You save 9%
GRANIT Gaiter Ø 33 mm upper, Ø 80 mm lower Deutz DX 80-145
GRANIT
Inner Ø top: 33 mm. Inner Ø bottom: 80 mm. More
Inner Ø top: 33 mm. Inner Ø bottom: 80 mm.
€62,07 €51,30 €56,50 €46,69
You save 9%
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
GRANIT
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€82,99 €68,59 €75,55 €62,44
You save 9%
VICTOR REINZ Crankshaft seal rear Fendt, Deutz-Fahr
€42,88 €35,44 €39,00 €32,23
You save 9%
Thrust washer rear thickness 2,94 mm Deutz-Fahr
Engine types: FL912. Dimensions: Thickness 2.94 mm. More
Engine types: FL912. Dimensions: Thickness 2.94 mm.
€17,30 €14,30
GRANIT Double hydraulic pump 16 + 11 cm³/rpm., taper 1:5 Ø 17 x 17
GRANIT
Output volume: 16 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Bosch no.: 0510665382. More
Output volume: 16 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Bos...
€686,70 €567,52 €625,15 €516,65
You save 9%
GRANIT Gas strut door-, for- or rear window 220 N, 502 mm Deutz-Fahr
GRANIT
Newtons: 220. A: 502 mm. B: 250 mm. C: 10 mm. D: 10 mm. Form: 6. Menke no.: 54804. More
Newtons: 220. A: 502 mm. B: 250 mm. C: 10 mm. D: 10 mm. Form: 6. Menke...
€43,59 €36,02 €39,65 €32,77
You save 9%
Walterscheid Shunting hitch coupling pin 35 mm, hole pattern 140 x 80 mm
Walterscheid
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colour: black. Trailer load: 25000 kg. No. of holes: 4. Description: Towing coupling... More
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colo...
€276,01 €228,11 €218,20 €180,33
You save 21%
GRANIT Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
GRANIT
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€26,20 €21,65
Fuse box 12-pin blade connection, 204 x 63 x 36,5 mm
Version: Suitable for Deutz 01174149 black, without fuses, for flat plug connector L 204 x W 63 x H 36.5 mm. To fit: Flat plug. Number of pins: 12. More
Version: Suitable for Deutz 01174149 black, without fuses, for flat pl...
€136,74 €113,01 €124,45 €102,85
You save 9%
Showing 49 - 72 of 261

Parts for your Deutz-Fahr DX 86 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 86. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 86. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 86. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart