Menu
EUR

Tractor parts Deutz-Fahr DX 86

Looking for parts for your Deutz-Fahr DX 86 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

261 parts found for Deutz-Fahr DX 86
Show:
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
21%
Walterscheid
Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.820,72 €1.504,73 €1.439,45 €1.189,63
 
Rivet copper 5 x 12 mm, DIN 7338-B - 100 pieces
Rivet copper 5 x 12 mm, DIN 7338-B - 100 pieces
Hole Ø: 5 mm. Length: 12 mm. d2: 9,5 mm. K: 1 mm. e: 2,5 mm. Material: Copper. D...
€60,65 €50,12
 
PROBOSS Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
4%
PROBOSS
Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment. Longit...
€1.299,25 €1.073,76 €1.245,00 €1.028,93
 
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
21%
Walterscheid
Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Description: This product is a ball hitch. The hitch ball 80 dimensions and area...
€2.071,98 €1.712,38 €1.638,10 €1.353,80
 
Bosch/Rexroth Hydraulic pump 11 cm³/rpm., claw 17,8 x 8, left Deutz-Fahr
9%
Bosch/Rexroth
Hydraulic pump 11 cm³/rpm., claw 17,8 x 8, left Deutz-Fahr
Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 | Drive shaft:...
€469,70 €388,18 €427,60 €353,39
 
Filter dryer airco 229 mm, Ø 76 mm, #6 3/8 o-ring Deutz-Fahr, Fendt
9%
Filter dryer airco 229 mm, Ø 76 mm, #6 3/8 o-ring Deutz-Fahr, Fendt
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection thread E:...
€60,62 €50,10 €55,15 €45,58
 
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
9%
LUK
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
Dimensions (mm): 20 x 52 x 15
€35,51 €29,35 €32,30 €26,69
 
HELLA Alternator 14 V, 33 A Case IH, Deutz-Fahr, John Deere
23%
HELLA
Alternator 14 V, 33 A Case IH, Deutz-Fahr, John Deere
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal voltage (V)...
€354,91 €293,31 €273,40 €225,95
 
FEBI Fuel filter WK842
57%
FEBI
Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
 
MAHLE Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
40%
MAHLE
Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
€699,35 €577,98 €418,85 €346,16
 
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
40%
MAHLE
Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€662,73 €547,71 €396,90 €328,02
 
GRANIT Seal kit Deutz-Fahr DX 4.10-92, Series DX 4-6
GRANIT
Seal kit Deutz-Fahr DX 4.10-92, Series DX 4-6
€227,70 €188,18
 
Brake shoe Hand brake 180 x 40 mm Deutz
9%
Brake shoe Hand brake 180 x 40 mm Deutz
€52,18 €43,12 €47,50 €39,26
 
GRANIT Gaiter Ø 33 mm upper, Ø 80 mm lower Deutz DX 80-145
9%
GRANIT
Gaiter Ø 33 mm upper, Ø 80 mm lower Deutz DX 80-145
Inner Ø top: 33 mm. Inner Ø bottom: 80 mm.
€62,07 €51,30 €56,50 €46,69
 
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
9%
GRANIT
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth.
€82,99 €68,59 €75,55 €62,44
 
VICTOR REINZ Crankshaft seal rear Fendt, Deutz-Fahr
9%
VICTOR REINZ
Crankshaft seal rear Fendt, Deutz-Fahr
€42,88 €35,44 €39,00 €32,23
 
GRANIT Rubber grommet cooling fan Fendt, Deutz-Fahr
GRANIT
Rubber grommet cooling fan Fendt, Deutz-Fahr
€6,55 €5,41
 
Thrust washer rear thickness 2,94 mm Deutz-Fahr
Thrust washer rear thickness 2,94 mm Deutz-Fahr
Engine types: FL912. Dimensions: Thickness 2.94 mm.
€17,30 €14,30
 
GRANIT Double hydraulic pump 16 + 11 cm³/rpm., taper 1:5 Ø 17 x 17
9%
GRANIT
Double hydraulic pump 16 + 11 cm³/rpm., taper 1:5 Ø 17 x 17
Output volume: 16 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Bosch no.: 051...
€686,70 €567,52 €625,15 €516,65
 
GRANIT Gas strut door-, for- or rear window 220 N, 502 mm Deutz-Fahr
9%
GRANIT
Gas strut door-, for- or rear window 220 N, 502 mm Deutz-Fahr
Newtons: 220. A: 502 mm. B: 250 mm. C: 10 mm. D: 10 mm. Form: 6. Menke no.: 5480...
€43,59 €36,02 €39,65 €32,77
 
Walterscheid Shunting hitch coupling pin 35 mm, hole pattern 140 x 80 mm
21%
Walterscheid
Shunting hitch coupling pin 35 mm, hole pattern 140 x 80 mm
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colour: black. ...
€276,01 €228,11 €218,20 €180,33
 
GRANIT Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
GRANIT
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade...
€26,20 €21,65
 
Fuse box 12-pin blade connection, 204 x 63 x 36,5 mm
9%
Fuse box 12-pin blade connection, 204 x 63 x 36,5 mm
Version: Suitable for Deutz 01174149 black, without fuses, for flat plug connect...
€136,74 €113,01 €124,45 €102,85
 
Showing 49 - 72 of 261

Parts for your Deutz-Fahr DX 86 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 86. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 86. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 86. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart