Menu
EUR

Tractor parts Deutz-Fahr DX 90

Looking for parts for your Deutz-Fahr DX 90 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

282 parts found for Deutz-Fahr DX 90
Show:
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
9%
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor
€183,88 €151,97 €167,35 €138,31
 
Cylinder head with valves Deutz-Fahr
9%
Cylinder head with valves Deutz-Fahr
Engine types: FL912, FL913. Menke no.: 70536.
€288,40 €238,35 €262,55 €216,98
 
Alternator 14 V / 33 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
9%
Alternator 14 V / 33 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holder, Renault...
€197,74 €163,42 €180,00 €148,76
 
GRANIT Replacement key lock number 14610 - 2 pieces
GRANIT
Replacement key lock number 14610 - 2 pieces
Locking number: 14610. Version: Locking no. 14610.
€15,00 €12,40
 
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
9%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €272,80 €225,45
 
GRANIT Piston set, complete Ø 100 mm, combustion chamber 55 mm
9%
GRANIT
Piston set, complete Ø 100 mm, combustion chamber 55 mm
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 55...
€152,40 €125,95 €138,70 €114,63
 
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
4%
PROBOSS
Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustm...
€827,03 €683,50 €792,55 €655,00
 
Mirror black unheated 310 x 220 mm, rod Ø 16 - 18 mm
Mirror black unheated 310 x 220 mm, rod Ø 16 - 18 mm
Tractor types: Deutz DX 80, 85, 86, 90, 92, 110, 120, 140, 145, 160, 230, 250, 3...
€48,95 €40,45
 
LUK Thrust bearing 55 x 90,5 x 22 mm
9%
LUK
Thrust bearing 55 x 90,5 x 22 mm
Dimensions (mm): 55 x 90.5 x 22
€192,19 €158,83 €174,95 €144,59
 
Clutch kit flywheel 3 mm raised Deutz, Deutz-Fahr
9%
Clutch kit flywheel 3 mm raised Deutz, Deutz-Fahr
To fit as: Deutz DX 4.10, 4.30 ,4.31, 4.50, 4.51, 4.70, 5.30, 5.50, 5.70, 6.05, ...
€1.065,75 €880,79 €970,25 €801,86
 
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
9%
Stabilus
Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
To fit as: Deutz Door, windscreen or rear screen
€47,75 €39,46 €43,45 €35,91
 
Window rubber 27,1 x 14,5 mm, clamping range 4 - 6 mm - 5 meter
9%
Window rubber 27,1 x 14,5 mm, clamping range 4 - 6 mm - 5 meter
Clamping range (mm): 4 - 6. Length (m): 5. W (mm): 27.1. H (mm): 14.5.
€58,54 €48,38 €53,25 €44,01
 
GRANIT Steering valve ew/dw 220 bar, 60 l/min, system SD60 Deutz
9%
GRANIT
Steering valve ew/dw 220 bar, 60 l/min, system SD60 Deutz
This control valve has been specially developed for Deutz tractors with SD60 hyd...
€663,73 €548,54 €604,25 €499,38
 
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
4%
BOSCH
Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,50 €453,31
 
GRANIT Temperature warning switch 12 V, M10, flat head
9%
GRANIT
Temperature warning switch 12 V, M10, flat head
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperature: - °C.
€108,59 €89,74 €98,85 €81,69
 
GRANIT Wiper motor with switch 12 V, 135°, M12 x 1
9%
GRANIT
Wiper motor with switch 12 V, 135°, M12 x 1
With integrated switch.
€127,48 €105,36 €116,00 €95,87
 
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
Version: Set of parts.
€19,15 €15,83
 
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€32,10 €26,53
 
GRANIT Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
GRANIT
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, ...
€35,00 €28,93
 
GRANIT Cylinder head Deutz-Fahr
9%
GRANIT
Cylinder head Deutz-Fahr
Engine types: BFL913, BFL913T.
€296,24 €244,83 €269,65 €222,85
 
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
21%
Walterscheid
Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ...
€2.146,48 €1.773,95 €1.697,00 €1.402,48
 
AKS-Dasis Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
9%
AKS-Dasis
Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 12 | Additio...
€504,50 €416,94 €459,25 €379,55
 
Bosch/Rexroth Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
9%
Bosch/Rexroth
Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole pattern (mm): ...
€653,73 €540,27 €595,15 €491,86
 
Expansion valve airco 1/2 inch o-ring, 35 g
9%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Co...
€54,07 €44,69 €49,20 €40,66
 
Showing 1 - 24 of 282

Parts for your Deutz-Fahr DX 90 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 90. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 90. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 90. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart