Menu
EUR

Tractor parts Deutz-Fahr Intrac 2003

Looking for parts for your Deutz-Fahr Intrac 2003 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

192 parts found for Deutz-Fahr Intrac 2003
Show:
Single pump 16,8 cm³/rpm., taper 1:5, Ø 17 x 17, left
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 45 mm. B: 107,5 mm. Direction of rotation: Anticlockwise. Line connection suction s... More
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 45 ...
€232,74 €192,35 €211,85 €175,08
You save 9%
GRAMMER Tractor seat Maximo Professional Deutz, Deutz-Fahr
GRAMMER
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 mm. Joystick con... More
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric....
€2.531,15 €2.091,86
O-ring for oil dipstick 30 x 3,5 mm Deutz-Fahr
Dimensions: 30 x 3.5 mm. More
Dimensions: 30 x 3.5 mm.
€16,00 €13,22
Lifting strut upper part right 438 mm, thread M22 x 2 Deutz-Fahr
Dimensions: Length = 438, Thread = M22 x 2 mm. More
Dimensions: Length = 438, Thread = M22 x 2 mm.
€138,64 €114,58 €126,20 €104,30
You save 9%
HELLA Steering column switch 45° curved, 380 mm, shift linkage 123 mm
HELLA
Version: Functions: indicators, horn and headlight flasher, lever 123 mm long, curved 45°, 60 mm cable with, blade terminal 6.3 mm. Length: 380 mm. More
Version: Functions: indicators, horn and headlight flasher, lever 123 ...
€104,29 €86,19 €100,40 €82,98
You save 4%
HELLA Lens headlight left and right, test mark E1 4488
HELLA
Installation location: Right, left. Test mark: E1 4488, ECE. More
Installation location: Right, left. Test mark: E1 4488, ECE.
€50,82 €42,00 €42,40 €35,04
You save 17%
Starter motor 12 V, 2,7 kW, 9 teeth, 223 mm, clockwise
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teeth: 9 | Holes / PCD (mm): 3 x 10,7 / 127,0 | Spacing flange to flywheel (mm): 28,... More
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teet...
€297,93 €246,22 €271,20 €224,13
You save 9%
Shim 0,2 mm, inner-Ø 110,1 mm, outer-Ø 117,6 mm Fendt F 231 GT
To fit as: Fendt F 231 GT from serial no. 16774 More
To fit as: Fendt F 231 GT from serial no. 16774
€2,71 €2,24
GRANIT Elastic clutch chain pitch Ø 80 mm, 6x bore Ø 12 mm Deutz-Fahr
GRANIT
Version: PCD: 80 mm, 6x hole Ø 12 mm More
Version: PCD: 80 mm, 6x hole Ø 12 mm
€478,24 €395,24 €435,35 €359,79
You save 9%
GRANIT Double clutch DuT 250/280 K 36 x 40 mm, 20 splines Deutz-Fahr
GRANIT
Additional information: Made in Germany | Dimensions (mm): 36 x 40, 20 grooves | Flywheel design: Flat | Material specifications: Organic clutch linin... More
Additional information: Made in Germany | Dimensions (mm): 36 x 40, 20...
€762,35 €630,04 €694,00 €573,55
You save 9%
GRANIT Brake drum for brake pads 60 mm wide Deutz-Fahr
€321,59 €265,78 €295,60 €244,30
You save 8%
Sealing ring for injection nozzle Ø 19 x 9,2 mm, 2 mm thick, copper Deutz-Fahr
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm. More
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm.
€2,90 €2,40
GRANIT Piston ring set 4 rings, Ø 100 mm, 2,5/2,5/2,5/5 mm Deutz-Fahr
GRANIT
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (trapezoidal ring), 2.5 mm, 2.5 mm, 5 mm. More
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (trapezoidal ring), 2.5 mm, 2.5...
€109,98 €90,89 €100,10 €82,73
You save 9%
Piston ring set 4 rings, Ø 100 mm Fendt, Deutz-Fahr
Dimensions: 4 rings, Ø 100 mm, 3 mm (trapezoidal ring) / 2.5 mm / 2.5 mm / 5 mm. More
Dimensions: 4 rings, Ø 100 mm, 3 mm (trapezoidal ring) / 2.5 mm / 2.5...
€43,73 €36,14 €39,80 €32,89
You save 9%
Piston pin engine Deutz FL912, FL913
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€26,75 €22,11
Cover engine Deutz FL812-FL913
Engine types: FL912, FL913, FL812. More
Engine types: FL912, FL913, FL812.
€12,00 €9,92
GRANIT Disc for cylinder head bolt Ø 12 x 23 x 7 mm engine FL912, FL913
GRANIT
Engine types: FL912, FL913. Dimensions: Ø 12 x 23 x 7 mm. More
Engine types: FL912, FL913. Dimensions: Ø 12 x 23 x 7 mm.
€13,75 €11,36
GRANIT Air receiver gasket Fendt, Deutz-Fahr
GRANIT
Engine types: FL712, FL812. More
Engine types: FL712, FL812.
€3,04 €2,51
Fuel tap thread 12 mm Deutz-Fahr
Thread: 12 mm. More
Thread: 12 mm.
€65,03 €53,74 €59,15 €48,88
You save 9%
Sealing ring piston 84 x 3 mm Deutz-Fahr
Dimensions: 84 x 3 mm. More
Dimensions: 84 x 3 mm.
€16,70 €13,80
Showing 145 - 168 of 192

Parts for your Deutz-Fahr Intrac 2003 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr Intrac 2003. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr Intrac 2003. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr Intrac 2003. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart