Menu
EUR

Tractor parts Deutz-Fahr Intrac 2004

Looking for parts for your Deutz-Fahr Intrac 2004 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

223 parts found for Deutz-Fahr Intrac 2004
Show:
LED main headlight 12/24 V, 142 x 171 x 82 mm, H4 + blade terminal
Bulb: LED | Nominal voltage (V): 12 / 24 | Operating temperature (°C): -40°C / +80°C | Connection: H4 + blade terminal | Power consumption (W): The... More
Bulb: LED | Nominal voltage (V): 12 / 24 | Operating temperature (°C)...
€133,97 €110,72 €126,75 €104,75
You save 5%
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor More
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Ze...
€183,88 €151,97 €167,35 €138,31
You save 9%
LUK Clutch kit double clutch Deutz-Fahr D 5006 - D 6907
LUK
Contents: Double clutch 458228000716, clutch plate 458325001216, 2x release bearing 458500028440 + 458500028800 and guide bearing 458410004540 More
Contents: Double clutch 458228000716, clutch plate 458325001216, 2x re...
€1.269,58 €1.049,24 €1.155,80 €955,21
You save 9%
Replacement key lock number 14610 - 2 pieces
Locking number: 14610. Version: Locking no. 14610. More
Locking number: 14610. Version: Locking no. 14610.
€15,00 €12,40
Alternator 14 V / 33 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holder, Renault, Schlüter More
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holde...
€197,74 €163,42 €180,00 €148,76
You save 9%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €272,80 €225,45
You save 9%
Clutch kit double clutch DuT 295 Deutz-Fahr
Contents: Clutch DuT 295 (445K88915001), organic disc (445S64421141), release bearing (445A63100030) More
Contents: Clutch DuT 295 (445K88915001), organic disc (445S64421141), ...
€863,71 €713,81 €786,30 €649,83
You save 9%
Control unit linkage 220 bar, 220 x Ø 57,9 mm Deutz SD60
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 40 l/min., Tightening torque: 25 Nm, Dimensions: 220 x Ø 57.9 mm. Menke no.... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€644,58 €532,71 €586,80 €484,96
You save 9%
Piston set, complete Ø 100 mm, combustion chamber 55 mm
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 55 mm, Combustion chamber depth 15.6 mm. More
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion ...
€152,40 €125,95 €138,70 €114,63
You save 9%
Indicator-width bulb LED 12 / 24 V, 84 x 84 x 51 mm, cable 4000 mm
Connection: Nylon 6.3 | Bulbs included: Yes | Fixing: Screwed | Light function: Indicator, position light | Nominal voltage (V): 12 / 24 | Additional ... More
Connection: Nylon 6.3 | Bulbs included: Yes | Fixing: Screwed | Light ...
€54,98 €45,44 €50,00 €41,32
You save 9%
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustment, longitudinal adjustment and backrest tilt adjustment. Mechanical ... More
Air suspension with 12V compressor. Fore/aft isolator. Continuous heig...
€827,03 €683,50 €792,55 €655,00
You save 4%
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
Stabilus
To fit as: Deutz Door, windscreen or rear screen More
To fit as: Deutz Door, windscreen or rear screen
€47,75 €39,46 €43,45 €35,91
You save 9%
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,50 €453,31
You save 4%
Ball pin steel M8, wrench size 22, E 13 mm Deutz-Fahr
A: M8 mm. E: 13 mm. SW: 22. More
A: M8 mm. E: 13 mm. SW: 22.
€17,90 €14,79
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.104,81 €913,07 €873,45 €721,86
You save 21%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.146,48 €1.773,95 €1.697,00 €1.402,48
You save 21%
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
€19,15 €15,83
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 26 mm. Menke no.: 45815. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€35,00 €28,93
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
Version: Ø 38 x 3 mm. More
Version: Ø 38 x 3 mm.
€7,65 €6,32
Wiper motor with switch 12 V, 135°, M12 x 1
With integrated switch. More
With integrated switch.
€127,48 €105,36 €116,00 €95,87
You save 9%
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€662,73 €547,71 €396,90 €328,02
You save 40%
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€80,43 €66,47 €77,45 €64,01
You save 4%
Alternator 14 V / 35 A, flange 56 mm, pulley Ø 68 mm, W-connection
Additional information: with W connection | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Installation angle (°): l 60 | Charging current (A): 35 | Fo... More
Additional information: with W connection | Mounting L / d / R (mm): 5...
€122,13 €100,93 €111,15 €91,86
You save 9%
Seal feed pump
€2,76 €2,28
Rivet copper 5 x 10 mm, DIN 7338-B - 100 pieces
Hole Ø: 5 mm. Length: 10 mm. d2: 9,5 mm. K: 1 mm. e: 2,5 mm. Material: Copper. DIN: 7338-B. More
Hole Ø: 5 mm. Length: 10 mm. d2: 9,5 mm. K: 1 mm. e: 2,5 mm. Material...
€50,38 €41,64 €47,95 €39,63
You save 5%
Temperature warning switch 12 V, M10, flat head
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperature: - °C. More
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperat...
€108,59 €89,74 €98,85 €81,69
You save 9%
HELLA Headlight left / right 12 / 24 V, R2, dipped beam / main beam, built-in
HELLA
To fit as: Case IH 383, 423, 433, 533, 633, 733, 833, 440, 540, 640, 453, 553, 554, 644, 654, 724, 824, 743, 744, 745, 745 S, 844, 844 S, 946, 1046, 1... More
To fit as: Case IH 383, 423, 433, 533, 633, 733, 833, 440, 540, 640, 4...
€106,89 €88,34 €82,35 €68,06
You save 23%
Return spring for brake shoe Ø 10 mm, length 83 mm Deutz 3006-6206
To fit as: Deutz 3006, 4006, 5206, 6206 More
To fit as: Deutz 3006, 4006, 5206, 6206
€6,45 €5,33
HELLA Alternator 14 V, 33 A Case IH, Deutz-Fahr, John Deere
HELLA
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal v...
€354,91 €293,31 €273,40 €225,95
You save 23%
Walterscheid Flange hitch automatic bolt 38 mm, 140 x 80 mm, M17, 2000 kg
Walterscheid
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value: 65 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Connecting pin:... More
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 k...
€1.582,08 €1.307,50 €1.250,80 €1.033,72
You save 21%
Seal tank cap Deutz-Fahr
Rocker arm shaft engine FL912, FL913, FL712, FL812 Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL712, FL812. More
Engine types: FL912, FL913, FL712, FL812.
€14,55 €12,02
Manifold gasket exhaust Fendt, Deutz-Fahr
Engine types: FL712, FL812. More
Engine types: FL712, FL812.
€4,69 €3,88
Wiper motor without integrated switch 12 V, 135°, M12 x 1
Volts: 12. W: konisch 8 x M6 mm. Angle: 135 °. A: 53 mm. B: 34 mm. C: 28 mm. D: M12 x 1 mm. E: 6 mm. F: M8 mm. G: 50-57 mm. Wiper blade length max.: ... More
Volts: 12. W: konisch 8 x M6 mm. Angle: 135 °. A: 53 mm. B: 34 mm. C:...
€145,99 €120,65 €132,90 €109,83
You save 9%
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.071,98 €1.712,38 €1.638,10 €1.353,80
You save 21%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€595,84 €492,43 €459,00 €379,34
You save 23%
Rocker engine F3L912, F4L912, F6L912, F6L913, BFL913
Engine types: F3L912, F4L912, F6L912, F6L913, BFL913, FL812. More
Engine types: F3L912, F4L912, F6L912, F6L913, BFL913, FL812.
€103,57 €85,60 €94,25 €77,89
You save 9%
Tank cap with ventilation Lockable, tank collar Ø 106 mm
Filler neck Ø: 106 mm. More
Filler neck Ø: 106 mm.
€33,50 €27,69
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 520 mm. Joystick console... More
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Sea...
€1.986,12 €1.641,42 €1.903,30 €1.572,98
You save 4%
Walterscheid Piton Fix rail width 309 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.723,50 €1.424,38 €1.362,60 €1.126,12
You save 21%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.820,72 €1.504,73 €1.439,45 €1.189,63
You save 21%
PROBOSS Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment. Longitudinal adjustment. Backrest tilt adjustment. Lumbar support. Adjustabl... More
Air suspension with 12V compressor. Fore/aft isolator. Height adjustme...
€1.299,25 €1.073,76 €1.245,00 €1.028,93
You save 4%
Showing 1 - 48 of 223

Parts for your Deutz-Fahr Intrac 2004 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr Intrac 2004. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr Intrac 2004. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr Intrac 2004. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart