Menu
EUR

Deutz-Fahr Agroplus 100 tractor parts & technical data

Electrics, lighting and trailer couplings for the Deutz-Fahr Agroplus 100 are grouped on this page. In total there are more than 160 parts that fit this model.

161 parts found for Deutz-Fahr Agroplus 100
Show:
FEBI Fuel filter Ø 77,5 mm, height 125 mm, M16 x 1,5
€9,76 €8,07 €6,64 €5,49
You save 32%
MAHLE Starter motor with reduction 12 V, 3,2 kW, 10 teeth, flange distance 25,6 mm
€423,96 €350,38 €264,95 €218,97
You save 38%
Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 82,5 mm, flange 22,5 mm
Danfoss Orbitrol OSPC 100 OR Case IH, SAME, Deutz-Fahr
Danfoss
Type: OSPC 100 OR / 150N1222. More
Type: OSPC 100 OR / 150N1222.
€960,29 €793,63 €912,25 €753,93
You save 5%
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
Dimensions: 48 x 5 mm. More
Dimensions: 48 x 5 mm.
€4,28 €3,54
GRANIT Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
GRANIT
Version: 12 V, Thread M12 x 1.25. More
Version: 12 V, Thread M12 x 1.25.
€55,60 €45,95 €52,80 €43,64
You save 5%
GRANIT Inlet valve engine Deutz-Fahr Agroplus 75-100, Agrotron 4.70-115
€37,80 €31,24 €35,90 €29,67
You save 5%
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pulley Ø 102 mm. To fit: Deutz, Lamborghini, Same. More
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pu...
€94,04 €77,72 €89,30 €73,80
You save 5%
Gas strut door screen 200 N, 265 mm, stroke 94 mm Deutz-Fahr
suitable for: Türscheibe. Newtons: 200. A: 265 mm. B: 147 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 94 mm. To fit: Door window. More
suitable for: Türscheibe. Newtons: 200. A: 265 mm. B: 147 mm. C: 10 m...
€64,44 €53,26 €61,20 €50,58
You save 5%
GRANIT Replacement key plastic-coated black, lock number 14644
GRANIT
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: Deutz-Fahr</gt></lt>. More
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: D...
€17,70 €14,63
Vibration damper SAME, Hürlimann, Deutz-Fahr, Lamborghini
Reference no.: 0.019.0172.0/20. More
Reference no.: 0.019.0172.0/20.
€213,69 €176,60 €203,00 €167,77
You save 5%
Cobo Indicator switch
€50,82 €42,00 €48,25 €39,88
You save 5%
Cobo Rear light left 185 x 85 x 72 mm, 12 V, hole spacing 80 mm
Cobo
Bulb: 12V10WK / R10W, 12V21WK / P21W. Connection: Plug connection M42 x 1.5. Width: 185 mm. Form: Rectangular. Height: 85 mm. Hole spacing: 80 mm. Dim... More
Bulb: 12V10WK / R10W, 12V21WK / P21W. Connection: Plug connection M42 ...
€71,77 €59,31 €64,90 €53,64
You save 10%
Stabilus Gas strut roof window 150 N, 235 mm, stroke 81 mm Deutz-Fahr
Stabilus
To fit as: Deutz Roof hatch More
To fit as: Deutz Roof hatch
€28,15 €23,26
Internal plate PTO shaft 2,5 mm, 97,3 mm, 124 mm, 48 teeth
Version: Thickness: 2.5 mm Inner: 97.3 mm Outer: 124 mm 48 teeth More
Version: Thickness: 2.5 mm Inner: 97.3 mm Outer: 124 mm 48 teeth
€38,30 €31,65
Aircon compressor 12 V, Ø 115 mm, 2 grooves, 100 ccm, PAD horizontal
Pulley Ø (mm): 115 | Connection: PAD horizontal | Suitable oil: PAG 46 | No. of grooves: 2 | Refrigerant: R 134a | Nominal voltage (V): 12 | Oil quan... More
Pulley Ø (mm): 115 | Connection: PAD horizontal | Suitable oil: PAG 4...
€277,78 €229,57 €263,85 €218,06
You save 5%
GRANIT Aircon compressor 12 V, pulley-Ø 132 mm, 2 grooves
GRANIT
Pulley Ø (mm): 132 | Nominal voltage (V): 12 | Refrigerant: R 134a | Connection: 1"" x 1"", horizontal | Fixing: EM | Suitable oil: PAG 46 | Oil quan... More
Pulley Ø (mm): 132 | Nominal voltage (V): 12 | Refrigerant: R 134a | ...
€449,51 €371,50 €427,00 €352,89
You save 5%
GRANIT Expansion valve 3/8 - 5/8 inch o-ring
GRANIT
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connection thread A: # 10, 5/8"" O-ring More
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connectio...
€46,71 €38,60 €44,35 €36,65
You save 5%
GRANIT Aircon compressor 12 V, pulley-Ø 148 mm, 2 grooves
GRANIT
Fixing: EM | Reference no.: 4558FK 351130101, QP7H15-8091 | Refrigerant: R 134a | Cylinder capacity (cm³): 155 | Connection type: 7/8"", 3/4"" | Pull... More
Fixing: EM | Reference no.: 4558FK 351130101, QP7H15-8091 | Refrigeran...
€390,06 €322,36 €370,55 €306,24
You save 5%
MAHLE Aircon compressor 12 V, R 134a, pulley-Ø 132 mm, 2 grooves, H/TO
MAHLE
Refrigerant: R 134a | Nominal voltage (V): 12 | Oil quantity (ccm): 135 | Additional information: with seal ring | Fixing: EM | Suitable oil: PAG 100 ... More
Refrigerant: R 134a | Nominal voltage (V): 12 | Oil quantity (ccm): 13...
€547,28 €452,30 €342,00 €282,64
You save 38%
Showing 97 - 120 of 161

Deutz-Fahr Agroplus 100 parts for engine work and clutch jobs

When an Agroplus 100 comes into the workshop for an engine overhaul or a new clutch, you want every part on the bench before the first bolt comes out. This page lists more than 160 parts that fit the Deutz-Fahr Agroplus 100, made by GRANIT, Cobo, MAHLE, VICTOR REINZ and GRAMMER.

What is available

  • Engine sealing: cylinder head gaskets, valve cover gaskets, front cover gaskets, seal kits and hydraulic pump seals
  • Damping: a vibration damper
  • Clutch: clutch plates
  • Electrics: starter motors, gear reduction starters and alternators
  • Fuel: fuel filters
  • Cab and lights: aircon compressors, roof window gas struts, mirrors and lamp glass

Head gasket thickness

Head gaskets for these engines come in more than one thickness, and the right one depends on how far the pistons stand proud of the block. Check the old gasket for its marking, usually holes or notches, and use the same thickness unless the block, pistons or crankshaft have been machined. In that case, measure piston protrusion again. Replace stretch bolts and follow the tightening sequence from the engine maker. Check the head and block for distortion with a straight edge before the new gasket goes on.

Clutch and fuel tips

Fitting a new clutch plate is the moment to renew the release bearing too and to inspect the flywheel for scoring and blue heat marks. After changing a fuel filter, bleed the system with the hand primer until no more air bubbles appear, otherwise the engine will be reluctant to start.

Starter and lights

A gear reduction starter uses a small, fast spinning motor behind a reduction gear, so it delivers plenty of torque and turns the engine over briskly even on a cold morning. When swapping, compare the mounting and the position of the terminals with your old starter. If a lamp glass has cracked, replace just the glass. That keeps moisture away from the reflector and saves buying a complete lamp.

Choosing the right part

Take the model and serial number from the rating plate, and for engine parts also note the engine designation on the block. VICTOR REINZ gaskets and electrical parts normally carry a reference number to compare with the product description.

Other models in the Agroplus range have their own pages, the Deutz-Fahr Agroplus 87 and the Deutz-Fahr Agroplus 95, each showing what fits that tractor. The rest of the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart