Menu
EUR

Deutz-Fahr AgroPrima 6.06 tractor parts & technical data

With more than 300 parts, the Deutz-Fahr AgroPrima 6.06 is well covered on this page. Trailer couplings, lighting and electrics are each grouped together.

318 parts found for Deutz-Fahr AgroPrima 6.06
Show:
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 26 mm. Menke no.: 45815. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€36,59 €30,24
Tank cap with ventilation, thread Ø 62 / 65 mm, collar Ø 65 mm
Thread Ø mm: 62 / 65. Filler neck Ø: 65 mm. More
Thread Ø mm: 62 / 65. Filler neck Ø: 65 mm.
€54,42 €44,98 €50,07 €41,38
You save 8%
Sealing ring push rod tube Fendt, Deutz-Fahr
Engine types: FL712, FL812. More
Engine types: FL712, FL812.
€1,73 €1,43
Manifold gasket exhaust Fendt, Deutz-Fahr
Engine types: FL712, FL812. More
Engine types: FL712, FL812.
€4,89 €4,04
Silencer vertical 1140 mm, Ø 74/50,5 mm Deutz-Fahr
Version: Length: 1140 mm, Inlet Ø: 74 mm, Outlet Ø: 50.5 mm. To fit: Deutz. More
Version: Length: 1140 mm, Inlet Ø: 74 mm, Outlet Ø: 50.5 mm. To fit:...
€272,89 €225,53 €251,06 €207,49
You save 8%
ROCKINGER Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31,5 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawba... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€910,37 €752,37 €876,79 €724,62
You save 4%
Push button switch hazard lights 12 / 24 V red, with lock
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L- R- 30- 30b- 49a- 15- 49), dustproof and splashproof, With glass soc... More
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6...
€57,83 €47,79 €53,20 €43,97
You save 8%
Rotary switch ventilation, without knob, 5 connections
Version: For blower, 3 switching steps, With 5 blade terminals. More
Version: For blower, 3 switching steps, With 5 blade terminals.
€42,59 €35,20 €39,18 €32,38
You save 8%
Rear light right 155 x 60 x 52 mm, 12 V, hole spacing 45 mm
Nominal voltage: 12 V. Installation location: Right. Bulb: 12V10WK / R10W, 12V21WK / P21W. Bulbs included: No. Light function: Indicator light, rear l... More
Nominal voltage: 12 V. Installation location: Right. Bulb: 12V10WK / R...
€70,46 €58,23 €64,82 €53,57
You save 8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
€56,78 €46,93 €52,24 €43,17
You save 8%
Double clutch DuT 310 41 x 45 mm, 21 splines Deutz-Fahr
Contents: 445K88052034AT | Flywheel dimension (mm): 3 (erhöht) | web (mm): 79 | Dimensions (mm): 41 x 45, 21 grooves | Additional information: Made i... More
Contents: 445K88052034AT | Flywheel dimension (mm): 3 (erhöht) | web ...
€857,96 €709,06 €839,32 €693,65
You save 2%
Clutch kit organic clutch plate Deutz-Fahr
Contents: Clutch (445K88052034), organic disc (445S64452041), release bearing (44504080), release bearing (44504079) More
Contents: Clutch (445K88052034), organic disc (445S64452041), release ...
€1.171,90 €968,51 €1.128,15 €932,36
You save 4%
HELLA Alternator 14 V, 55 A without belt pulley Deutz-Fahr
HELLA
Charging current (A): 55 | Nominal voltage (V): 14 | Additional information: Without pulley More
Charging current (A): 55 | Nominal voltage (V): 14 | Additional inform...
€644,17 €532,37 €496,33 €410,19
You save 23%
Wabco Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
Wabco
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Threa... More
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed:...
€1.893,95 €1.565,25 €1.742,43 €1.440,03
You save 8%
Knott Industrietechnik Indicator brake lining Deutz-Fahr AgroPrima, AgroStar, AgroXtra
€72,22 €59,69 €66,44 €54,91
You save 8%
Brake drum / disc inner-Ø 180 mm, disc-Ø 275 mm, with taper
€284,72 €235,31 €261,94 €216,48
You save 8%
Gaiter Ø 33 mm upper, Ø 80 mm lower Deutz DX 80-145
Inner Ø top: 33 mm. Inner Ø bottom: 80 mm. More
Inner Ø top: 33 mm. Inner Ø bottom: 80 mm.
€62,07 €51,30 €57,10 €47,19
You save 8%
V-belt Deutz-Fahr DX 4.70-6.05, AgroPrima 4.51-6.16
€41,46 €34,26 €38,14 €31,52
You save 8%
Injection nozzle Deutz-Fahr AgroXtra 3.57-6.17, Fendt Farmer 260-275
Type formula: DLLA150P145, 0433171131. Bosch no.: 2580433171131. More
Type formula: DLLA150P145, 0433171131. Bosch no.: 2580433171131.
€45,39 €37,51 €41,76 €34,51
You save 8%
Sealing ring for injection nozzle Ø 19 x 9,2 mm, 2 mm thick, copper Deutz-Fahr
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm. More
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm.
€3,03 €2,50
Cylinder head Deutz-Fahr
Engine types: BFL913, BFL913T. More
Engine types: BFL913, BFL913T.
€296,24 €244,83 €272,54 €225,24
You save 8%
Shock absorber 280 mm, stroke 95 mm, cylinder Ø 22 mm Deutz-Fahr
Stroke: 95 mm. Length: 280 mm. Cylinder Ø: 22 mm. Piston rod Ø: 8 mm. More
Stroke: 95 mm. Length: 280 mm. Cylinder Ø: 22 mm. Piston rod Ø: 8 mm
€79,17 €65,43 €72,84 €60,20
You save 8%
Stop cable A 1350 mm, B 1040 mm Deutz-Fahr AgroPrima, AgroXtra
€160,82 €132,91 €147,95 €122,28
You save 8%
Exhaust manifold Deutz-Fahr
€195,61 €161,66 €179,96 €148,73
You save 8%
Bosch/Rexroth Double pump anticlockwise 19 + 11 cm³/rpm. Deutz-Fahr
Bosch/Rexroth
OEM version: 02239230. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 230/280 bar. Direction of rotation: Anticlockwise. Output volume: ... More
OEM version: 02239230. Drive shaft: Taper 1:5, Ø 17 x 17. Operating p...
€990,03 €818,21 €910,83 €752,75
You save 8%
ROCKINGER Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 102 kN. Load capacity: 4 t. Ball Ø: 80 mm. Lock: KS80. More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.431,83 €1.183,33 €1.103,20 €911,74
You save 23%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.820,72 €1.504,73 €1.439,48 €1.189,65
You save 21%
Scharmüller Drawbar frame standard 330/25/32 mm, 3000 kg, black Deutz-Fahr, Steyr
Scharmüller
To fit as: Deutz-Fahr Serie DX AgroPrima, DX Agrostar, DX AgroXtra, DX-4-Reihe, DX-6-Reihe, DX-Reihe; Steyr Serie 8100 SK-2; More
To fit as: Deutz-Fahr Serie DX AgroPrima, DX Agrostar, DX AgroXtra, DX...
€1.187,63 €981,51 €1.130,71 €934,47
You save 5%
Temperature warning switch 12 V, M10, flat head
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperature: - °C. More
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperat...
€108,59 €89,74 €99,90 €82,56
You save 8%
Sensor speed inductive encoder
Version: Inductive displacement sensor (speed). More
Version: Inductive displacement sensor (speed).
€91,79 €75,86 €84,45 €69,79
You save 8%
Fuse box 12-pin blade connection, 204 x 63 x 36,5 mm
Version: Suitable for Deutz 01174149 black, without fuses, for flat plug connector L 204 x W 63 x H 36.5 mm. To fit: Flat plug. Number of pins: 12. More
Version: Suitable for Deutz 01174149 black, without fuses, for flat pl...
€136,74 €113,01 €125,80 €103,97
You save 8%
Reflector
To fit as: Case IH C 42, 48, 55, 64, 70, CS 48, 52, 58, 63, 68, 75, Deutz-Fahr AgroCompact 3.30 V/F, 3.50 V/F, 3.50 S, 3.70 V/F, 3.90 F, 3.90 S, AgroP... More
To fit as: Case IH C 42, 48, 55, 64, 70, CS 48, 52, 58, 63, 68, 75, De...
€6,68 €5,52
Cobo Lens indicator/position light left / right
Cobo
To fit as: Case IH, Deutz-Fahr, Fiat, Hürlimann, John Deere, Lamborghini, Landini, Massey Ferguson, Mc Cormick, Renault, Same More
To fit as: Case IH, Deutz-Fahr, Fiat, Hürlimann, John Deere, Lamborgh...
€14,73 €12,17
Cobo Indicator/position light left / right 120 x 80 x 56 mm, P21W, R5W
Cobo
To fit as: Deutz-Fahr AgroCompact 3.30 F/V, 3.50 V/F/S, 3.70 F/V, 3.90 F/S, AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16, AgroXtra 3.57, 4.07, 4.17, 4, 47, ... More
To fit as: Deutz-Fahr AgroCompact 3.30 F/V, 3.50 V/F/S, 3.70 F/V, 3.90...
€37,21 €30,75
Clutch kit flywheel 3 mm raised Deutz, Deutz-Fahr
To fit as: Deutz DX 4.10, 4.30 ,4.31, 4.50, 4.51, 4.70, 5.30, 5.50, 5.70, 6.05, Agroprima 4.31, 4.51, 4.56, 6.06, 6.16 More
To fit as: Deutz DX 4.10, 4.30 ,4.31, 4.50, 4.51, 4.70, 5.30, 5.50, 5....
€1.065,75 €880,79 €1.030,49 €851,64
You save 3%
Control unit 220 bar, 40 l/min, 220 x Ø 57,9 mm Deutz-Fahr
Max. operating pressure: 220 bar Nominal flow rate: max. 40 l/min. Tightening torque: 25 Nm Dimensions: 220 x Ø 57.9 mm More
Max. operating pressure: 220 bar Nominal flow rate: max. 40 l/min. Tig...
€645,84 €533,75 €594,17 €491,05
You save 8%
MAHLE Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
€699,35 €577,98 €418,87 €346,18
You save 40%
Hydraulic cylinder telescopic axle Deutz-Fahr
€617,73 €510,52 €568,31 €469,68
You save 8%
Ball joint 225 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,5 mm
A: 225 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 225 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€82,12 €67,87 €75,55 €62,44
You save 8%
Universal joint 30,2 x 82 mm, bush lubrication
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Bush lubrication. More
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Bush...
€171,77 €141,96 €158,03 €130,60
You save 8%
Repair set brake cylinder DOT4 Deutz-Fahr
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€61,12 €50,51 €56,23 €46,47
You save 8%
Master brake cylinder DOT 4, Ø 20,64 mm Deutz DX, AgroPrima, AgroXtra
€526,32 €434,98 €484,21 €400,18
You save 8%
Repair set foot brake without piston Knott version Deutz-Fahr
€65,99 €54,54 €60,71 €50,17
You save 8%
Showing 97 - 144 of 318

Deutz-Fahr AgroPrima 6.06 parts

An AgroPrima 6.06 tends to stay on the farm for many seasons, and sooner or later the clutch, brakes and charging system need attention. This page carries more than 300 parts for the 6.06, from brands such as GRANIT, HELLA, ROCKINGER, LUK and MAHLE.

For the clutch there are clutch kits, thrust bearings and crankshaft seals. If you are splitting the tractor for a new clutch, change the thrust bearing and the seal while it is apart. A whining bearing or a seal that lets oil onto the plate will otherwise have you splitting it again before long. Look at the flywheel too. Scoring or blue heat marks mean the face needs machining before the new plate goes in.

Brakes and hydraulics

The braking side is covered by fixed calipers and bleed valves. After fitting a caliper, bleed the system starting from the furthest point and keep going until no more bubbles appear. A seized bleed valve is better replaced than forced, because one snapped off inside the caliper costs far more time. For the linkage there are sealing rings for the lift shaft, and repair sets for parts such as the feed pump.

Charging, starting and hitching

Alternators and starter motors keep the AgroPrima running, while push button switches operate items like the work lights. In the cab, gas struts hold the door, front or rear window open. For hitching there are drawbars, drawbar frames and trailer couplings, including ROCKINGER. Exhaust gaskets round off the list.

An alternator that has stopped charging is not always faulty itself. First check whether the charge warning light comes on with the ignition. If it stays dark, the alternator is not being excited and the fault usually lies in the wire or the bulb. After fitting a starter motor, clean all the earth connections or the slow start may come back. A drawbar should slide easily in the rail of its frame, so clean the rail and give it a thin coat of grease to keep the locking reliable. An exhaust gasket is always fitted new, even if the old one still looks intact.

What fits your 6.06

Check the type plate to confirm it is the AgroPrima 6.06, and if in doubt note the number on the old part. Compare that with the reference number shown for the product. With alternators and starter motors that share the same housing shape, this is what prevents a wrong order.

The Deutz-Fahr AgroPrima 6.16 from the same series has its own page with the parts that fit it. Any other Deutz-Fahr tractor can be picked from Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart