Menu
EUR

Deutz-Fahr AgroPrima 6.06 tractor parts & technical data

With more than 300 parts, the Deutz-Fahr AgroPrima 6.06 is well covered on this page. Trailer couplings, lighting and electrics are each grouped together.

318 parts found for Deutz-Fahr AgroPrima 6.06
Show:
KS Connecting rod bearing Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
KS
Dimensions: Ø 60 mm, Width 25 mm. More
Dimensions: Ø 60 mm, Width 25 mm.
€26,51 €21,91
VICTOR REINZ Cylinder head gasket 1,1 mm, outer-Ø 120 mm Fendt, Deutz-Fahr
VICTOR REINZ
Engine types: FL912, FL913, BFL912, BFL913. Colour: A-Form. Outer Ø: 120 mm. Inner Ø: 102,6 mm. Material: Stahl. Thickness: 1,1 mm. More
Engine types: FL912, FL913, BFL912, BFL913. Colour: A-Form. Outer Ø: ...
€10,74 €8,87
Optibelt V-belt AV10 x 1600 LA Deutz-Fahr
€43,88 €36,26 €40,37 €33,36
You save 8%
Flame glow plug 11 V, 20 A, thread M20 x 1,5 Deutz Agrolux 60-90
Version: 11 V, 20 A, thread M20 x 1.5. More
Version: 11 V, 20 A, thread M20 x 1.5.
€96,62 €79,85 €88,89 €73,46
You save 8%
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€14,93 €12,33
Seal 80 x 3 mm Fendt, Deutz-Fahr
Dimensions: 80 x 3 mm. More
Dimensions: 80 x 3 mm.
€15,21 €12,57
Piston pin engine Deutz FL912, FL913
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€27,94 €23,09
Hand throttle cable A 1660 mm, B 1575 mm Deutz-Fahr
A: 1660 mm. B: 1575 mm. More
A: 1660 mm. B: 1575 mm.
€39,27 €32,45 €36,13 €29,86
You save 8%
Thermag nut exhaust manifold M8, height 8,5 mm Deutz FL712, FL812
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8.5 mm. More
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8....
€1,26 €1,04
Push rod tube 220 mm Deutz-Fahr
Engine types: FL912, FL913, FL812. Length: 220 mm. More
Engine types: FL912, FL913, FL812. Length: 220 mm.
€26,51 €21,91
Tappet engine FL912, FL913 Fendt, Deutz-Fahr
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€19,24 €15,90
Crankshaft seal rear engine Deutz FL913, BFL913
€39,99 €33,05 €36,79 €30,41
You save 8%
Valve seat ring inlet valve Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€35,57 €29,40 €32,72 €27,05
You save 8%
Inlet valve 3-rings Deutz engine FL912, FL913, BFL913
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€28,83 €23,82
Control unit 220 bar, 40 l/min, 220 x Ø 58 mm Deutz-Fahr
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 40 l/min., Tightening torque: 25 Nm, Dimensions: 220 x Ø 58 mm. More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€621,58 €513,70 €571,85 €472,61
You save 8%
Steering valve ew/dw with float position 220 bar, 60 l/min, system SD80
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 60 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 130... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€742,76 €613,85 €683,34 €564,74
You save 8%
GRAMMER Tractor seat Maximo Professional Deutz, Deutz-Fahr
GRAMMER
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 mm. Joystick con... More
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric....
€2.581,18 €2.133,21
Gas strut roof window or windshield 200 N, 255 mm, stroke 91 mm Deutz-Fahr
suitable for: Dachluke oder Frontscheibe. Newtons: 200. A: 255 mm. B: 125 mm. C: 6 mm. D: 6 mm. Form: 8. d1: 6 mm. d2: 15 mm. Stroke: 91 mm. To fit: R... More
suitable for: Dachluke oder Frontscheibe. Newtons: 200. A: 255 mm. B: ...
€55,77 €46,09 €51,31 €42,40
You save 8%
Door lock, left Deutz-Fahr AgroPrima 4.31, DX 7.10
€99,19 €81,98 €91,25 €75,42
You save 8%
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 520 mm. Joystick con... More
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric....
€1.905,32 €1.574,64 €1.875,89 €1.550,32
You save 2%
Bush left lift arm 71 x 80 x 85 mm Deutz-Fahr
Dimensions: 71 x 80 x 85 mm. More
Dimensions: 71 x 80 x 85 mm.
€147,22 €121,67 €135,44 €111,94
You save 8%
Lift rod 485 mm, M27 x 3, hole spacing 178 mm Deutz-Fahr
Dimensions: Length = 485, Thread = M27 x 3, Hole spacing = 178 mm. Thread: M27 x 3 mm. Length: 485 mm. More
Dimensions: Length = 485, Thread = M27 x 3, Hole spacing = 178 mm. Thr...
€252,40 €208,60 €232,21 €191,91
You save 8%
ROCKINGER Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.122,48 €927,67 €864,85 €714,76
You save 23%
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€27,39 €22,63
Drive shaft 660 mm, 2x M18 x 1,5
Version: Thread: 2x M18 x 1.5. Length: 660 mm. More
Version: Thread: 2x M18 x 1.5. Length: 660 mm.
€85,48 €70,64 €78,64 €64,99
You save 8%
Push button switch windshield wiper/-nozzle system 12/24 V, button green
Version: 12/24 V, Green button, without lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (01 - S - S1 - 0), dustproof and splashproof. More
Version: 12/24 V, Green button, without lock, Ø 30 mm, 4 blade termin...
€35,51 €29,35
Relays relays changeover contact 12 V / 30 A, 5-pin, with holder
Version: 12 V / 30 A With bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 30 A With bracket, 5-pin, blade terminal 6.3 mm.
€12,99 €10,73
Repair set feed pump set of parts outer-Ø 41 mm
To fit as: Pierburg and Imsa. More
To fit as: Pierburg and Imsa.
€20,01 €16,54
Ball joint 270 mm, taper 24 - 26 mm, M22 x 1,5, M22 x 1,5
A: 270 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 270 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€84,90 €70,17 €78,11 €64,55
You save 8%
Ball joint 60 mm, M27 x 1,5, M18 x 1,5, taper 29 - 32 mm
A: 60 mm. C: M27 x 1,5 mm. D: M18 x 1,5 mm. E: 29 mm. F: 32 mm. Taper: 29 - 32 mm. More
A: 60 mm. C: M27 x 1,5 mm. D: M18 x 1,5 mm. E: 29 mm. F: 32 mm. Taper:...
€101,60 €83,97 €93,47 €77,25
You save 8%
Track rod 761 mm, M18 x 1,5, taper 20 - 22,2 mm, Ø 28 mm
A: 761 mm. C: M18 x 1,5 mm. D: 28 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 761 mm. C: M18 x 1,5 mm. D: 28 mm. E: 20 mm. F: 22,2 mm. Taper: 20 ...
€106,00 €87,60 €97,52 €80,60
You save 8%
Repair set brake cylinder DOT4 Deutz-Fahr
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€56,50 €46,69 €51,98 €42,96
You save 8%
Protective cap brake cylinder DOT4 Deutz D 6807C-7807, DX 3.70SC-86
Set of parts foot brake Deutz-Fahr AgroPrima, AgroStar, AgroXtra
Description: Does NOT fit Agrostar 6.61. More
Description: Does NOT fit Agrostar 6.61.
€62,12 €51,34 €60,17 €49,73
You save 3%
Bleed valve Knott Deutz-Fahr AgroPrima, AgroStar, AgroXtra
Description: Fits fixed caliper 71704068, 71704066, 71704069, 71704070. More
Description: Fits fixed caliper 71704068, 71704066, 71704069, 71704070...
€36,06 €29,80
Fixed caliper, complete without brake lining Knott top right, DOT 4
€783,82 €647,79 €721,11 €595,96
You save 8%
Brake drum / disc left inner-Ø 180 mm, disc-Ø 276 mm
€630,05 €520,70 €579,65 €479,05
You save 8%
Gaiter Ø 31 mm upper Deutz DX 80-145
Inner Ø top: 31 mm. More
Inner Ø top: 31 mm.
€62,40 €51,57 €57,41 €47,44
You save 8%
Air hose air intake pipe inner-Ø 70 mm, length 50 mm Deutz-Fahr
Inner Ø: 70 mm. Outer Ø: 80 mm. Length: 50 mm. More
Inner Ø: 70 mm. Outer Ø: 80 mm. Length: 50 mm.
€37,56 €31,04
Thrust washer for thickness 2,94 mm Deutz-Fahr
Engine types: FL912. Dimensions: Thickness 2.94 mm. More
Engine types: FL912. Dimensions: Thickness 2.94 mm.
€18,91 €15,63
Disc for cylinder head bolt Ø 12 x 23 x 7 mm engine FL912, FL913
Engine types: FL912, FL913. Dimensions: Ø 12 x 23 x 7 mm. More
Engine types: FL912, FL913. Dimensions: Ø 12 x 23 x 7 mm.
€14,35 €11,86
Gasket set complete engine F6L912, F6L913 Deutz-Fahr, Fendt
Engine types: F6L912, F6L913. Additional information: with crankshaft sealing ring / without cylinder head gasket. More
Engine types: F6L912, F6L913. Additional information: with crankshaft ...
€139,53 €115,31 €128,37 €106,09
You save 8%
Showing 145 - 192 of 318

Deutz-Fahr AgroPrima 6.06 parts

An AgroPrima 6.06 tends to stay on the farm for many seasons, and sooner or later the clutch, brakes and charging system need attention. This page carries more than 300 parts for the 6.06, from brands such as GRANIT, HELLA, ROCKINGER, LUK and MAHLE.

For the clutch there are clutch kits, thrust bearings and crankshaft seals. If you are splitting the tractor for a new clutch, change the thrust bearing and the seal while it is apart. A whining bearing or a seal that lets oil onto the plate will otherwise have you splitting it again before long. Look at the flywheel too. Scoring or blue heat marks mean the face needs machining before the new plate goes in.

Brakes and hydraulics

The braking side is covered by fixed calipers and bleed valves. After fitting a caliper, bleed the system starting from the furthest point and keep going until no more bubbles appear. A seized bleed valve is better replaced than forced, because one snapped off inside the caliper costs far more time. For the linkage there are sealing rings for the lift shaft, and repair sets for parts such as the feed pump.

Charging, starting and hitching

Alternators and starter motors keep the AgroPrima running, while push button switches operate items like the work lights. In the cab, gas struts hold the door, front or rear window open. For hitching there are drawbars, drawbar frames and trailer couplings, including ROCKINGER. Exhaust gaskets round off the list.

An alternator that has stopped charging is not always faulty itself. First check whether the charge warning light comes on with the ignition. If it stays dark, the alternator is not being excited and the fault usually lies in the wire or the bulb. After fitting a starter motor, clean all the earth connections or the slow start may come back. A drawbar should slide easily in the rail of its frame, so clean the rail and give it a thin coat of grease to keep the locking reliable. An exhaust gasket is always fitted new, even if the old one still looks intact.

What fits your 6.06

Check the type plate to confirm it is the AgroPrima 6.06, and if in doubt note the number on the old part. Compare that with the reference number shown for the product. With alternators and starter motors that share the same housing shape, this is what prevents a wrong order.

The Deutz-Fahr AgroPrima 6.16 from the same series has its own page with the parts that fit it. Any other Deutz-Fahr tractor can be picked from Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart