Menu
EUR

Deutz-Fahr AgroPrima 6.06 tractor parts & technical data

With more than 300 parts, the Deutz-Fahr AgroPrima 6.06 is well covered on this page. Trailer couplings, lighting and electrics are each grouped together.

318 parts found for Deutz-Fahr AgroPrima 6.06
Show:
MAHLE Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
MAHLE
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additional information: Dust-tight | Installation angle (°): l 60 | Mounting L / d / R... More
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additio...
€326,57 €269,89 €195,60 €161,65
You save 40%
Clutch cable driving clutch 1285 mm, sleeve 955 mm, M8, M12 Deutz-Fahr
Sleeve length (mm): 955 | Cable length (mm): 1285 | Thread: M08, M12 More
Sleeve length (mm): 955 | Cable length (mm): 1285 | Thread: M08, M12
€91,49 €75,61 €84,17 €69,56
You save 8%
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ring | Dimensions (mm): - | Material: Steel More
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ri...
€65,38 €54,03 €60,15 €49,71
You save 8%
Thrust bearing closed version 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€134,70 €111,32 €123,92 €102,42
You save 8%
MAHLE Alternator 14 V, 65 A, flange 56 mm, with fan
MAHLE
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Nominal voltag... More
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal value...
€303,54 €250,86 €181,80 €150,25
You save 40%
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
GRAMMER
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Restraint system: Optional | - Super comfort seat with air suspension and 12V compre... More
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Rest...
€2.293,87 €1.895,76
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
FEBI Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
€212,35 €175,50 €38,55 €31,86
You save 82%
BOSCH Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
€512,28 €423,37 €493,38 €407,75
You save 4%
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,54 €453,34
You save 4%
Knott Industrietechnik Bleed valve Knott version Deutz
€15,98 €13,20
Master brake cylinder piston Ø 19,05 mm, DOT 4 Deutz-Fahr
€483,27 €399,40 €444,61 €367,45
You save 8%
MANN-FILTER Filter set engine oil filter, air filter, hydraulic filter
MANN-FILTER
To fit: Deutz. To fit type: AgroPrima, AgroXtra. Set consisting of: Engine oil filter, Main fuel filter, Air filter, Secondary element, Hydraulic filt... More
To fit: Deutz. To fit type: AgroPrima, AgroXtra. Set consisting of: En...
€251,53 €207,88 €150,65 €124,50
You save 40%
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
€20,01 €16,54
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm. More
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€33,53 €27,71
Valve stem seal Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€5,00 €4,13
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
Version: Ø 38 x 3 mm. More
Version: Ø 38 x 3 mm.
€7,99 €6,60
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm. More
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€374,78 €309,74 €344,80 €284,96
You save 8%
Start switch 12 V / 24 V, built-in-Ø 28 mm - 2 keys
To fit as: Case IH 485XL, 585, 585XL, 685, 685XL, 785XL, 885, 885XL 743XL, 745XL, 844XL, 845XL, 856XL 955XL, 1055XL, Deutz-Fahr AgroPrima 4.31, 4.51, ... More
To fit as: Case IH 485XL, 585, 585XL, 685, 685XL, 785XL, 885, 885XL 74...
€48,78 €40,31 €44,88 €37,09
You save 8%
LUK Clutch kit Ø 280 mm Deutz-Fahr AgroPrima 4.31 - 6.16, DX 4.10 - 120
LUK
Contents: Pressure plate 458231002017, clutch plate 458328011616 More
Contents: Pressure plate 458231002017, clutch plate 458328011616
€1.199,68 €991,47 €1.153,71 €953,48
You save 4%
Bosch/Rexroth Hydraulic pump 19 cm³ anticlockwise, taper 1:5, Ø 17 x 17 Deutz-Fahr
Bosch/Rexroth
Bosch no.: 1517222716 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 19 | Drive shaft: Taper 1:5, Ø 17 x 17 More
Bosch no.: 1517222716 | Direction of rotation: Anticlockwise | Output ...
€633,15 €523,26 €582,50 €481,40
You save 8%
Bosch/Rexroth Hydraulic pump 11 cm³/rpm., claw 17,8 x 8, left Deutz-Fahr
Bosch/Rexroth
Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 | Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 1517222715 More
Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 | Dr...
€469,70 €388,18 €432,12 €357,13
You save 8%
Scharmüller Clutch complete type 1120 coupling pin 38 mm, nose weight 1250 kg
Scharmüller
Hole (mm): M20 | Overhang (mm): 211 | Thread: M20 | Lock: Automatic | Internal width (mm): 98 | Colour: Black | Hole spacing (mm): 129 | D-value (kN):... More
Hole (mm): M20 | Overhang (mm): 211 | Thread: M20 | Lock: Automatic | ...
€1.364,15 €1.127,40 €1.261,52 €1.042,58
You save 8%
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
MAHLE
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation angle (°): l + r 60 | Belt width (mm) / type: - | Direction of rot... More
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | ...
€468,16 €386,91 €280,40 €231,74
You save 40%
SACHS Thrust bearing 106 x 140 x 25 mm
SACHS
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€205,54 €169,87 €189,10 €156,28
You save 8%
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
LUK
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€35,51 €29,35 €32,67 €27,00
You save 8%
LUK Clutch plate 280UKF 31 x 36 mm, 16 splines Deutz-Fahr
LUK
Dimensions (mm): 31 x 36 16 grooves More
Dimensions (mm): 31 x 36 16 grooves
€215,77 €178,32 €198,51 €164,06
You save 8%
Clutch plate 310, 31 x 36 mm, 16 splines Deutz-Fahr
Additional information: Made in Germany | Dimensions (mm): 31 x 36, 16 grooves More
Additional information: Made in Germany | Dimensions (mm): 31 x 36, 16...
€199,10 €164,55 €183,17 €151,38
You save 8%
MAHLE Alternator 14 V, 55 A, flange 56 mm Deutz-Fahr, Fendt
MAHLE
Direction of rotation: ↻ | Belt width (mm) / type: - | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Pulley Ø (mm): - | Nominal voltage (V): 14 | Mo... More
Direction of rotation: ↻ | Belt width (mm) / type: - | Mounting L / ...
€319,94 €264,41 €191,62 €158,36
You save 40%
Alternator 14 V / 80 A, flange 55,5 mm
Belt width (mm) / type: - | Pulley spacing (mm): - | Direction of rotation: ↻ | Additional information: Dust-tight, with W connection | Belt tension... More
Belt width (mm) / type: - | Pulley spacing (mm): - | Direction of rota...
€236,43 €195,40 €217,52 €179,77
You save 8%
Alternator 14 V, 55 A, flange 56 mm, Deutz-Fahr, Fendt
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values (V / A): 14 / 55 | Flange size (mm): 56,0 | Installation angle (°): l 60 | Pull... More
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values ...
€161,58 €133,54 €148,65 €122,85
You save 8%
Elring Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
Elring
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary set: For one cylinder head | AF (mm): 17 More
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary se...
€118,56 €97,98 €109,08 €90,14
You save 8%
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
€541,43 €447,46 €498,12 €411,67
You save 8%
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€82,99 €68,59 €76,35 €63,10
You save 8%
Seal feed pump
€2,89 €2,39
HELLA Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
HELLA
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment: Front. Connection: Blade terminal. Width: 120 mm. Form: Rectangular. Height: 80... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment:...
€28,18 €23,29
SACHS Thrust bearing 65 x 96 x 23 mm
SACHS
Dimensions (mm): 65 x 96 x 23 More
Dimensions (mm): 65 x 96 x 23
€140,56 €116,17 €129,32 €106,87
You save 8%
LUK Clutch plate 310UKF 31 x 35 mm 16 splines Deutz-Fahr
LUK
Dimensions (mm): 31 x 35 16 grooves More
Dimensions (mm): 31 x 35 16 grooves
€250,68 €207,17 €230,63 €190,60
You save 8%
Clutch plate 280, 31 x 36 mm, 16 splines Deutz-Fahr
Dimensions (mm): 31 x 36, 16 grooves | Additional information: Made in Germany More
Dimensions (mm): 31 x 36, 16 grooves | Additional information: Made in...
€145,49 €120,24 €133,85 €110,62
You save 8%
Elring Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
Elring
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: FPM (fluoro rubber) More
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: F...
€70,51 €58,27 €64,87 €53,61
You save 8%
Master brake cylinder Ø 20,64 mm, DOT4 Deutz-Fahr AgroPrima, AgroXtra
Medium: DOT4. Hole Ø: 20.64 mm. More
Medium: DOT4. Hole Ø: 20.64 mm.
€629,26 €520,05 €578,92 €478,45
You save 8%
Push rod brake cylinder DOT4 Deutz-Fahr
€36,41 €30,09 €33,50 €27,68
You save 8%
Fixed caliper, complete without brake lining Knott top left, DOT 4
€783,82 €647,79 €721,11 €595,96
You save 8%
PTO shaft end piece 299 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
Version: Length 299 mm, 1 3/8", 6 splines, for 540 rpm. More
Version: Length 299 mm, 1 3/8", 6 splines, for 540 rpm.
€467,30 €386,20 €429,92 €355,30
You save 8%
Showing 49 - 96 of 318

Deutz-Fahr AgroPrima 6.06 parts

An AgroPrima 6.06 tends to stay on the farm for many seasons, and sooner or later the clutch, brakes and charging system need attention. This page carries more than 300 parts for the 6.06, from brands such as GRANIT, HELLA, ROCKINGER, LUK and MAHLE.

For the clutch there are clutch kits, thrust bearings and crankshaft seals. If you are splitting the tractor for a new clutch, change the thrust bearing and the seal while it is apart. A whining bearing or a seal that lets oil onto the plate will otherwise have you splitting it again before long. Look at the flywheel too. Scoring or blue heat marks mean the face needs machining before the new plate goes in.

Brakes and hydraulics

The braking side is covered by fixed calipers and bleed valves. After fitting a caliper, bleed the system starting from the furthest point and keep going until no more bubbles appear. A seized bleed valve is better replaced than forced, because one snapped off inside the caliper costs far more time. For the linkage there are sealing rings for the lift shaft, and repair sets for parts such as the feed pump.

Charging, starting and hitching

Alternators and starter motors keep the AgroPrima running, while push button switches operate items like the work lights. In the cab, gas struts hold the door, front or rear window open. For hitching there are drawbars, drawbar frames and trailer couplings, including ROCKINGER. Exhaust gaskets round off the list.

An alternator that has stopped charging is not always faulty itself. First check whether the charge warning light comes on with the ignition. If it stays dark, the alternator is not being excited and the fault usually lies in the wire or the bulb. After fitting a starter motor, clean all the earth connections or the slow start may come back. A drawbar should slide easily in the rail of its frame, so clean the rail and give it a thin coat of grease to keep the locking reliable. An exhaust gasket is always fitted new, even if the old one still looks intact.

What fits your 6.06

Check the type plate to confirm it is the AgroPrima 6.06, and if in doubt note the number on the old part. Compare that with the reference number shown for the product. With alternators and starter motors that share the same housing shape, this is what prevents a wrong order.

The Deutz-Fahr AgroPrima 6.16 from the same series has its own page with the parts that fit it. Any other Deutz-Fahr tractor can be picked from Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart