Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Deutz-Fahr AgroStar 6.11 tractor parts & technical data

Is there a Deutz-Fahr AgroStar 6.11 on your farm? Here are more than 250 parts for this model, including electrics, lighting and trailer couplings.

277 parts found for Deutz-Fahr AgroStar 6.11
Show:
Piston ring set 4 rings, Ø 100 mm, 2,5/2,5/2,5/5 mm Deutz-Fahr
8%
Piston ring set 4 rings, Ø 100 mm, 2,5/2,5/2,5/5 mm Deutz-Fahr
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (trapezoidal ring), 2.5 mm, 2.5 mm, 5 mm.
€109,98 €90,89 €101,18 €83,62
 
Piston ring set 3 rings Ø 100 mm, 3 mm trapezoidal ring / 2 mm / 3,5 mm
8%
Piston ring set 3 rings Ø 100 mm, 3 mm trapezoidal ring / 2 mm / 3,5 mm
Dimensions: 3 rings, Ø 100 mm, 3 mm (trapezoidal ring) / 2 mm / 3.5 mm.
€42,77 €35,35 €39,35 €32,52
 
Steering valve ew/dw with float position 220 bar, 70 l/min, system SB23OC
8%
Steering valve ew/dw with float position 220 bar, 70 l/min, system SB23OC
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 70 l/m...
€602,59 €498,01 €554,38 €458,17
 
Seal kit steering valve SD60 Deutz-Fahr
Seal kit steering valve SD60 Deutz-Fahr
Description: for control unit 02379662, 04360637, 04331325, 02940278.
€10,14 €8,38
 
Bosch/Rexroth Hydraulic pump 19 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
8%
Bosch/Rexroth
Hydraulic pump 19 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
Output volume: 19 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure ...
€402,77 €332,87 €370,55 €306,24
 
Door lock, right Deutz-Fahr AgroStar 4.61-6.61
8%
Door lock, right Deutz-Fahr AgroStar 4.61-6.61
€82,74 €68,38 €76,12 €62,91
 
Door lock, right Deutz-Fahr AgroPrima 4.31, DX 7.10
8%
Door lock, right Deutz-Fahr AgroPrima 4.31, DX 7.10
€76,54 €63,26 €70,42 €58,20
 
Handle left Deutz-Fahr AgroStar 4.61-6.61
8%
Handle left Deutz-Fahr AgroStar 4.61-6.61
€87,50 €72,31 €80,50 €66,53
 
Inner ring front left lift arm 75 x 88,6 x 1 mm Deutz-Fahr
8%
Inner ring front left lift arm 75 x 88,6 x 1 mm Deutz-Fahr
Dimensions: 75 x 88.6 x 1 mm.
€49,68 €41,06 €45,71 €37,77
 
O-ring for oil dipstick 30 x 3,5 mm Deutz-Fahr
O-ring for oil dipstick 30 x 3,5 mm Deutz-Fahr
Dimensions: 30 x 3.5 mm.
€16,79 €13,87
 
Sealing ring piston 84 x 88 x 1,5 mm Deutz-Fahr
Sealing ring piston 84 x 88 x 1,5 mm Deutz-Fahr
Dimensions: 84 x 88 x 1.5 mm.
€34,64 €28,63
 
Pin 20 x 105 mm Deutz-Fahr
8%
Pin 20 x 105 mm Deutz-Fahr
Dimensions: 20 x 105 mm.
€55,75 €46,07 €51,29 €42,39
 
Windshield frame shock absorber or rear window 230 N, 505 mm Deutz-Fahr
8%
Windshield frame shock absorber or rear window 230 N, 505 mm Deutz-Fahr
suitable for: Frontscheibe oder Heckscheibe. Newtons: 230. A: 505 mm. B: 255 mm....
€49,15 €40,62 €45,22 €37,37
 
Temperature warning switch 6 - 24 V, M14 x 1,5 mm, up to 100 °C
8%
Temperature warning switch 6 - 24 V, M14 x 1,5 mm, up to 100 °C
Version: Flat head | 6 - 24 V | M14 x 1.5 | Up to max. 100. Connection: Flat hea...
€86,14 €71,19 €79,25 €65,49
 
Pto switch PTO clutch M14 x 1, 12 V / 24 V, make contact
8%
Pto switch PTO clutch M14 x 1, 12 V / 24 V, make contact
Version: Make contact, mechanical, Thread M14 x 1 with 2 hexagon nuts (AF 19), O...
€33,75 €27,89 €31,05 €25,66
 
Driver for angle drive / drive shaft
8%
Driver for angle drive / drive shaft
Version: For angle drive.
€64,27 €53,12 €59,13 €48,87
 
Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switching funct...
€6,45 €5,33
 
Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€11,13 €9,19
 
HELLA Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
HELLA
Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€20,33 €16,80
 
Repair set brake cylinder without piston Deutz-Fahr
8%
Repair set brake cylinder without piston Deutz-Fahr
Additional information: Without piston.
€51,25 €42,36 €47,15 €38,97
 
Repair set brake cylinder without piston Valtra-Valmet, Deutz-Fahr
8%
Repair set brake cylinder without piston Valtra-Valmet, Deutz-Fahr
Additional information: Without piston.
€44,94 €37,14 €41,34 €34,17
 
Oil drain valve M18 x 1,5
8%
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€68,16 €56,33 €62,71 €51,82
 
Shim liner Top 1,2 mm, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Shim liner Top 1,2 mm, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,2 mm.
€10,38 €8,57
 
Brass nut exhaust manifold M8, height 10 mm Deutz-Fahr
Brass nut exhaust manifold M8, height 10 mm Deutz-Fahr
Version: Thread M8, Height: 10 mm. Thread: M8.
€7,93 €6,55
 
Thrust washer for thickness 1,3 mm Fendt, Deutz-Fahr
Thrust washer for thickness 1,3 mm Fendt, Deutz-Fahr
Engine types: FL812, FL912. Dimensions: 5.
€16,23 €13,41
 
Tappet tube spring Fendt, Deutz-Fahr
Tappet tube spring Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL812, FL712.
€7,51 €6,21
 
Air receiver gasket Fendt, Deutz-Fahr
Air receiver gasket Fendt, Deutz-Fahr
Engine types: FL712, FL812.
€3,18 €2,62
 
Valve guide inlet and outlet Fendt, Deutz-Fahr
Valve guide inlet and outlet Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€8,10 €6,69
 
Protective ring front right lift arm 85 x 70 x 10 mm Deutz-Fahr
8%
Protective ring front right lift arm 85 x 70 x 10 mm Deutz-Fahr
Dimensions: 85 x 70 x 10 mm.
€34,72 €28,69 €31,94 €26,40
 
Gasket exhaust Deutz, Deutz-Fahr
Gasket exhaust Deutz, Deutz-Fahr
To fit as: Deutz series 07, 4007, 4507, 4807, 5207, 6007, 6207, 6507, 6807, 6907...
€7,55 €6,24
 
Showing 241 - 277 of 277

Deutz-Fahr AgroStar 6.11 parts for engine work and servicing

Stripping the engine on an AgroStar 6.11 is a job you want to do once, with every gasket and seal on the bench before you start. This page lists more than 250 parts that fit the Deutz-Fahr AgroStar 6.11, from GRANIT, HELLA, VICTOR REINZ, MAHLE and Walterscheid.

Engine parts

  • Cylinder head gaskets and exhaust gaskets
  • Crankshaft seals for the Deutz engine
  • Shims for the cylinder liners
  • Seal kits
  • Repair sets for the fuel feed pump

Measure liner protrusion before choosing shims

The shim under the collar of each cylinder liner sets how far the liner stands proud of the block. Too little protrusion and the head gasket is not clamped properly, which leads to a blown gasket. During a rebuild, measure the protrusion of every liner with a dial gauge and choose the shim thickness from that reading. Reusing the old shims without measuring is a gamble, as they settle over the years. Then torque the cylinder head down in the correct sequence and in stages.

Beyond the engine

The electrical side is covered with alternators and starter motors. For the driveline there are clutch plates, including versions with a torsion damper. The hydraulics get sealing rings for the lift shaft, and the brakes get fixed calipers supplied complete without lining. In the cab you will find door locks and gas struts for the door and windows, and at the back there are drawbar frames.

One more workshop habit: a new crankshaft seal can leak if its lip runs in the groove worn by the old one. Clean the shaft, oil the lip lightly and, if the groove is deep, press the new seal in slightly less far so it runs on clean metal.

Finding the matching part

The serial number of your AgroStar 6.11 is on the type plate. For engine parts the engine type matters as well, and that is marked on the block. The reference number on an old alternator, starter or caliper makes the comparison with the parts on this page straightforward.

Other AgroStar models

The AgroStar series includes these tractors, each with its own page:

If you run one of them next to the 6.11, check fitment on that model's own page. Older Deutz tractors and other ranges are on the page with all Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart