Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Deutz-Fahr AgroStar 6.11 tractor parts & technical data

Is there a Deutz-Fahr AgroStar 6.11 on your farm? Here are more than 250 parts for this model, including electrics, lighting and trailer couplings.

277 parts found for Deutz-Fahr AgroStar 6.11
Show:
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
8%
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor
€183,88 €151,97 €169,17 €139,81
 
Piston set, complete Ø 100 mm, combustion chamber 55 mm
8%
Piston set, complete Ø 100 mm, combustion chamber 55 mm
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 55...
€152,40 €125,95 €140,21 €115,87
 
Ball pin steel M8, wrench size 22, E 13 mm Deutz-Fahr
Ball pin steel M8, wrench size 22, E 13 mm Deutz-Fahr
A: M8 mm. E: 13 mm. SW: 22.
€18,70 €15,45
 
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
21%
Walterscheid
Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 ...
€1.104,81 €913,07 €873,47 €721,88
 
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
8%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €275,71 €227,86
 
LUK Clutch kit Deutz-Fahr AgroStar 4.61 - 6.38
4%
LUK
Clutch kit Deutz-Fahr AgroStar 4.61 - 6.38
Contents: Pressure plate 458133023111, clutch plate 458333006511, release bearin...
€1.343,78 €1.110,56 €1.286,28 €1.063,04
 
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
21%
Walterscheid
Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ...
€2.146,48 €1.773,95 €1.697,03 €1.402,50
 
LUK Clutch kit Deutz-Fahr AgroStar 4.61 - 4.78, 6.08 - 6.61
8%
LUK
Clutch kit Deutz-Fahr AgroStar 4.61 - 4.78, 6.08 - 6.61
Contents: Pressure plate 458133023111, clutch plate 458333005911, release bearin...
€1.229,18 €1.015,85 €1.130,85 €934,58
 
Alternator 14 V / 95 A, flange 56 mm
8%
Alternator 14 V / 95 A, flange 56 mm
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | Pulley Ø (...
€193,94 €160,28 €178,42 €147,46
 
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
4%
HELLA
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning l...
€80,43 €66,47 €77,45 €64,01
 
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VII
GRAMMER
Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VII
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat supplied w...
€2.132,30 €1.762,23
 
Bolt set 2de steering valve 3x M8 x 180
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit...
€29,14 €24,08
 
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
Super comfort seat with low-frequency air suspension and 12V compressor. APS: au...
€1.991,23 €1.645,64
 
MAHLE Alternator 14 V / 80 A, flange 56 mm, pulley-Ø 68 mm
40%
MAHLE
Alternator 14 V / 80 A, flange 56 mm, pulley-Ø 68 mm
Additional information: Dust-tight with W connection | Flange size (mm): 56,0 | ...
€358,59 €296,36 €214,78 €177,50
 
Expansion valve airco 1/2 inch o-ring, 35 g
8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Co...
€54,07 €44,69 €49,74 €41,11
 
Alternator 14 V / 65 A, flange 56 mm Deutz-Fahr, Fendt, Steyr
8%
Alternator 14 V / 65 A, flange 56 mm Deutz-Fahr, Fendt, Steyr
Charging current (A): 65 | Mounting L / d / R (mm): 56,0 / 8,0 / 86,0 | Installa...
€170,34 €140,78 €156,71 €129,51
 
Angle drive transmission 1:1, 1x M18 x 1,5, 1x M22 x 1,5
8%
Angle drive transmission 1:1, 1x M18 x 1,5, 1x M22 x 1,5
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5.
€163,89 €135,45 €150,78 €124,61
 
Walterscheid Trailer coupling hitch pin 38 mm, 65,6 kN, black Deutz-Fahr
21%
Walterscheid
Trailer coupling hitch pin 38 mm, 65,6 kN, black Deutz-Fahr
Colour: Black | Load capacity (kg): 2000 | Lock: Automatic, spherical hitch bolt...
€2.242,44 €1.853,26 €1.772,89 €1.465,20
 
Bosch/Rexroth Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
8%
Bosch/Rexroth
Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole pattern (mm): ...
€653,73 €540,27 €601,43 €497,05
 
Scharmüller Drawbar frame 43,2 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
3%
Scharmüller
Drawbar frame 43,2 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (kg): 2000 | ...
€1.074,22 €887,79 €1.038,28 €858,08
 
Clutch master cylinder Ø 25,4 mm gray cast iron Deutz-Fahr
8%
Clutch master cylinder Ø 25,4 mm gray cast iron Deutz-Fahr
Material: Grey cast iron | Hole Ø (mm): 25.4
€280,27 €231,63 €257,85 €213,10
 
LUK Thrust bearing driving clutch 65 x 96 x 23 mm
8%
LUK
Thrust bearing driving clutch 65 x 96 x 23 mm
Dimensions (mm): 65 x 96 x 23
€162,37 €134,19 €149,38 €123,45
 
Thrust bearing driving clutch closed version 65 x 97 x 23 mm
8%
Thrust bearing driving clutch closed version 65 x 97 x 23 mm
Dimensions (mm): 65 x 97 x 23
€82,54 €68,21 €75,94 €62,76
 
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
40%
MAHLE
Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dus...
€334,90 €276,78 €200,59 €165,78
 
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
40%
MAHLE
Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€662,73 €547,71 €396,94 €328,05
 
Walterscheid Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
21%
Walterscheid
Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
Description: This product is an automatic trailer hitch. The jaw dimensions and ...
€2.193,20 €1.812,56 €1.733,96 €1.433,03
 
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
21%
Walterscheid
Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Description: This product is a ball hitch. The hitch ball 80 dimensions and area...
€2.071,98 €1.712,38 €1.638,13 €1.353,83
 
HELLA Work lamp flood beam Double Beam H3 12 / 24 V, bending angle 25 - 35
4%
HELLA
Work lamp flood beam Double Beam H3 12 / 24 V, bending angle 25 - 35
Installation location: Universal | Bulbs included: No | Connection: Open cable e...
€92,05 €76,07 €88,64 €73,26
 
FTE Clutch slave cylinder Ø 23,81 mm Deutz-Fahr AgroStar 4.61 - 6.61
8%
FTE
Clutch slave cylinder Ø 23,81 mm Deutz-Fahr AgroStar 4.61 - 6.61
Material: Grey cast iron | Hole Ø (mm): 23,81
€1.025,74 €847,72 €943,68 €779,90
 
Filter dryer airco 229 mm, Ø 76 mm, #6 3/8 o-ring Deutz-Fahr, Fendt
8%
Filter dryer airco 229 mm, Ø 76 mm, #6 3/8 o-ring Deutz-Fahr, Fendt
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection thread E:...
€60,62 €50,10 €55,77 €46,09
 
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
23%
HELLA
Alternator CA1433IR 14 V / 95 A without belt pulley
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Wit...
€503,99 €416,52 €388,33 €320,93
 
Knott Industrietechnik Bleed valve Deutz-Fahr AgroPrima, AgroStar, AgroXtra
8%
Knott Industrietechnik
Bleed valve Deutz-Fahr AgroPrima, AgroStar, AgroXtra
€35,13 €29,03 €32,32 €26,71
 
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
8%
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€374,78 €309,74 €344,80 €284,96
 
Repair set polyurethane beglazingskit, Terostat primer - 310 ml
8%
Repair set polyurethane beglazingskit, Terostat primer - 310 ml
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - Wool wiper...
€58,03 €47,96 €53,39 €44,12
 
Hood catch Deutz-Fahr
8%
Hood catch Deutz-Fahr
€86,59 €71,56 €79,66 €65,84
 
Step 340 x 160 x 30 mm Deutz-Fahr Agroprima, Agrostar, Agroxtra, DX
8%
Step 340 x 160 x 30 mm Deutz-Fahr Agroprima, Agrostar, Agroxtra, DX
Dimensions: 340x160x30mm mm.
€94,42 €78,03 €86,87 €71,79
 
Replacement key plastic-coated black, lock number 14607
Replacement key plastic-coated black, lock number 14607
Version: Locking no. 14607 | To fit: New Holland, Steyr
€7,59 €6,27
 
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
8%
Stabilus
Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
To fit as: Deutz Door, windscreen or rear screen
€47,75 €39,46 €43,93 €36,31
 
AKS-Dasis Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
8%
AKS-Dasis
Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 12 | Additio...
€504,50 €416,94 €464,14 €383,59
 
Scharmüller Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
4%
Scharmüller
Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota grey | Guide...
€1.378,56 €1.139,31 €1.318,28 €1.089,49
 
Scharmüller Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
4%
Scharmüller
Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 330 | Detent...
€1.288,81 €1.065,13 €1.235,71 €1.021,25
 
MAHLE Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
40%
MAHLE
Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additional informat...
€326,57 €269,89 €195,60 €161,65
 
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
8%
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ring | Dimens...
€65,38 €54,03 €60,15 €49,71
 
MAHLE Alternator 14 V, 65 A, flange 56 mm, with fan
40%
MAHLE
Alternator 14 V, 65 A, flange 56 mm, with fan
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal values (V / A): 1...
€303,54 €250,86 €181,80 €150,25
 
Alternator 14 V, 65 A, flange 56 mm, pulley Ø 73 mm
8%
Alternator 14 V, 65 A, flange 56 mm, pulley Ø 73 mm
Additional information: With W connection | Charging current (A): 65 | Belt widt...
€144,18 €119,16 €132,65 €109,62
 
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
GRAMMER
Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Restraint syst...
€2.293,87 €1.895,76
 
FEBI Fuel filter WK842
57%
FEBI
Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
 
Showing 1 - 48 of 277

Deutz-Fahr AgroStar 6.11 parts for engine work and servicing

Stripping the engine on an AgroStar 6.11 is a job you want to do once, with every gasket and seal on the bench before you start. This page lists more than 250 parts that fit the Deutz-Fahr AgroStar 6.11, from GRANIT, HELLA, VICTOR REINZ, MAHLE and Walterscheid.

Engine parts

  • Cylinder head gaskets and exhaust gaskets
  • Crankshaft seals for the Deutz engine
  • Shims for the cylinder liners
  • Seal kits
  • Repair sets for the fuel feed pump

Measure liner protrusion before choosing shims

The shim under the collar of each cylinder liner sets how far the liner stands proud of the block. Too little protrusion and the head gasket is not clamped properly, which leads to a blown gasket. During a rebuild, measure the protrusion of every liner with a dial gauge and choose the shim thickness from that reading. Reusing the old shims without measuring is a gamble, as they settle over the years. Then torque the cylinder head down in the correct sequence and in stages.

Beyond the engine

The electrical side is covered with alternators and starter motors. For the driveline there are clutch plates, including versions with a torsion damper. The hydraulics get sealing rings for the lift shaft, and the brakes get fixed calipers supplied complete without lining. In the cab you will find door locks and gas struts for the door and windows, and at the back there are drawbar frames.

One more workshop habit: a new crankshaft seal can leak if its lip runs in the groove worn by the old one. Clean the shaft, oil the lip lightly and, if the groove is deep, press the new seal in slightly less far so it runs on clean metal.

Finding the matching part

The serial number of your AgroStar 6.11 is on the type plate. For engine parts the engine type matters as well, and that is marked on the block. The reference number on an old alternator, starter or caliper makes the comparison with the parts on this page straightforward.

Other AgroStar models

The AgroStar series includes these tractors, each with its own page:

If you run one of them next to the 6.11, check fitment on that model's own page. Older Deutz tractors and other ranges are on the page with all Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart