Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Deutz-Fahr AgroStar 6.11 tractor parts & technical data

Is there a Deutz-Fahr AgroStar 6.11 on your farm? Here are more than 250 parts for this model, including electrics, lighting and trailer couplings.

277 parts found for Deutz-Fahr AgroStar 6.11
Show:
FEBI Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
82%
FEBI
Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
€212,35 €175,50 €38,55 €31,86
 
BOSCH Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
4%
BOSCH
Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
€512,28 €423,37 €493,38 €407,75
 
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
4%
BOSCH
Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,54 €453,34
 
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
Version: Set of parts.
€20,01 €16,54
 
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€33,53 €27,71
 
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
Version: Ø 38 x 3 mm.
€7,99 €6,60
 
HELLA Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
HELLA
Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment: Front. Co...
€28,18 €23,29
 
SACHS Clutch plate 330 sintered, 41 x 45, 21 splines Deutz-Fahr AgroStar
8%
SACHS
Clutch plate 330 sintered, 41 x 45, 21 splines Deutz-Fahr AgroStar
Dimensions (mm): 41 x 45 21 grooves | Material specifications: Sintered clutch l...
€770,56 €636,83 €708,92 €585,88
 
Scharmüller Clutch complete type 1120 coupling pin 38 mm, nose weight 1250 kg
8%
Scharmüller
Clutch complete type 1120 coupling pin 38 mm, nose weight 1250 kg
Hole (mm): M20 | Overhang (mm): 211 | Thread: M20 | Lock: Automatic | Internal w...
€1.364,15 €1.127,40 €1.261,52 €1.042,58
 
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
40%
MAHLE
Alternator 14 V / 120 A, flange 56 mm, form B, fan
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation...
€468,16 €386,91 €280,40 €231,74
 
Rotary switch on / off, 3 blade terminals, Ø 12 mm
8%
Rotary switch on / off, 3 blade terminals, Ø 12 mm
Version: Universal, circuit: on/off, 3 blade terminals, mounting opening Ø 12 mm...
€106,69 €88,17 €98,15 €81,12
 
LUK Clutch plate 41 x 45 mm, 21 splines Deutz-Fahr AgroStar 4.61 - 6.38
8%
LUK
Clutch plate 41 x 45 mm, 21 splines Deutz-Fahr AgroStar 4.61 - 6.38
Dimensions (mm): 41 x 45 21 grooves
€649,02 €536,38 €597,10 €493,47
 
LUK Single clutch TGFR Deutz-Fahr AgroStar 4.61 - 6.38
8%
LUK
Single clutch TGFR Deutz-Fahr AgroStar 4.61 - 6.38
€805,90 €666,03 €741,43 €612,75
 
MAHLE Alternator 14 V, 55 A, flange 56 mm Deutz-Fahr, Fendt
40%
MAHLE
Alternator 14 V, 55 A, flange 56 mm Deutz-Fahr, Fendt
Direction of rotation: ↻ | Belt width (mm) / type: - | Mounting L / d / R (mm): ...
€319,94 €264,41 €191,62 €158,36
 
Alternator 14 V / 80 A, flange 55,5 mm
8%
Alternator 14 V / 80 A, flange 55,5 mm
Belt width (mm) / type: - | Pulley spacing (mm): - | Direction of rotation: ↻ | ...
€236,43 €195,40 €217,52 €179,77
 
Alternator 14 V, 55 A, flange 56 mm, Deutz-Fahr, Fendt
8%
Alternator 14 V, 55 A, flange 56 mm, Deutz-Fahr, Fendt
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values (V / A): 1...
€161,58 €133,54 €148,65 €122,85
 
Elring Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
8%
Elring
Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary set: For one...
€118,56 €97,98 €109,08 €90,14
 
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
8%
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
€541,43 €447,46 €498,12 €411,67
 
Knott Industrietechnik Bleed valve Knott version Deutz
Knott Industrietechnik
Bleed valve Knott version Deutz
€15,98 €13,20
 
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
8%
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth.
€82,99 €68,59 €76,35 €63,10
 
Sealing ring push rod tube Fendt, Deutz-Fahr
Sealing ring push rod tube Fendt, Deutz-Fahr
Engine types: FL712, FL812.
€1,73 €1,43
 
Manifold gasket exhaust Fendt, Deutz-Fahr
Manifold gasket exhaust Fendt, Deutz-Fahr
Engine types: FL712, FL812.
€4,89 €4,04
 
Rotary switch ventilation, without knob, 5 connections
8%
Rotary switch ventilation, without knob, 5 connections
Version: For blower, 3 switching steps, With 5 blade terminals.
€42,59 €35,20 €39,18 €32,38
 
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
4%
HELLA
Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensio...
€38,51 €31,83 €37,08 €30,65
 
Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
8%
Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
€56,78 €46,93 €52,24 €43,17
 
End plate steering valve 210 bar, 140 x 40 x 104 mm
8%
End plate steering valve 210 bar, 140 x 40 x 104 mm
Description: Diese Endsektion ist zum Abschluss einer Wegeventilkombination erfo...
€363,63 €300,52 €334,54 €276,48
 
Bosch/Rexroth Triple pump 14 + 8 + 16 cm³, left Deutz-Fahr
8%
Bosch/Rexroth
Triple pump 14 + 8 + 16 cm³, left Deutz-Fahr
OEM version: 02239230 | Direction of rotation: Anticlockwise | Drive shaft: Spli...
€1.946,98 €1.609,07 €1.791,22 €1.480,35
 
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
8%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"", vertica...
€426,97 €352,87 €392,81 €324,64
 
SACHS Thrust bearing 65 x 96 x 23 mm
8%
SACHS
Thrust bearing 65 x 96 x 23 mm
Dimensions (mm): 65 x 96 x 23
€140,56 €116,17 €129,32 €106,87
 
LUK Clutch plate 44 x 48 mm, 22 splines Deutz-Fahr AgroStar 4.61 - 6.38
8%
LUK
Clutch plate 44 x 48 mm, 22 splines Deutz-Fahr AgroStar 4.61 - 6.38
Dimensions (mm): 44 x 48 22 grooves
€694,97 €574,36 €639,37 €528,41
 
Diaphragm pressure plate GMF 330 Deutz-Fahr AgroStar 4.61 - 6.38
8%
Diaphragm pressure plate GMF 330 Deutz-Fahr AgroStar 4.61 - 6.38
Additional information: Made in Germany
€711,62 €588,12 €654,69 €541,07
 
Elring Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
8%
Elring
Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: FPM (fluoro r...
€70,51 €58,27 €64,87 €53,61
 
Hand brake cable 810 mm, M14 Deutz-Fahr AgroStar 4.61-6.61
8%
Hand brake cable 810 mm, M14 Deutz-Fahr AgroStar 4.61-6.61
Length: 810 mm. Thread: M14. Dimensions: Length = 810 mm, Thread M14.
€348,88 €288,33 €320,97 €265,26
 
Fixed caliper, complete without brake lining Knott top left, DOT 4
8%
Fixed caliper, complete without brake lining Knott top left, DOT 4
€783,82 €647,79 €721,11 €595,96
 
PTO shaft end piece 299 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
8%
PTO shaft end piece 299 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
Version: Length 299 mm, 1 3/8", 6 splines, for 540 rpm.
€467,30 €386,20 €429,92 €355,30
 
VICTOR REINZ Valve cover gasket Deutz engine FL912, FL913, BFL913
VICTOR REINZ
Valve cover gasket Deutz engine FL912, FL913, BFL913
€10,01 €8,27
 
Clutch cooling fan Fendt, Deutz-Fahr
Clutch cooling fan Fendt, Deutz-Fahr
€656,05 €542,19
 
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, ...
€36,59 €30,24
 
Connecting rod bolt M12 x 1,5 x 55 mm Deutz-Fahr
Connecting rod bolt M12 x 1,5 x 55 mm Deutz-Fahr
Dimensions: M12 x 1.5 x 55 mm.
€31,71 €26,21
 
Bolt set 1ste steering valve 3x M8 x 90
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90.
€18,40 €15,21
 
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 4...
€48,67 €40,22 €44,78 €37,01
 
Hydraulic pump 16,8 cm³, anticlockwise rotation, taper 17 mm
8%
Hydraulic pump 16,8 cm³, anticlockwise rotation, taper 17 mm
€132,96 €109,88 €122,32 €101,09
 
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustm...
€842,55 €696,32
 
SACHS Clutch plate 330, 44 x 48 mm, 22 splines sintered Deutz-Fahr
8%
SACHS
Clutch plate 330, 44 x 48 mm, 22 splines sintered Deutz-Fahr
Dimensions (mm): 44 x 48 22 grooves | Material specifications: Sintered clutch l...
€795,65 €657,56 €732,00 €604,96
 
Clutch plate 330 44 x 48 mm, 22 splines Deutz-Fahr
8%
Clutch plate 330 44 x 48 mm, 22 splines Deutz-Fahr
Material specifications: Sintered clutch lining | Additional information: Made i...
€553,30 €457,27 €509,04 €420,69
 
Clutch plate 330 with torsion damper, 41 x 45 mm, 21 splines, sintered
8%
Clutch plate 330 with torsion damper, 41 x 45 mm, 21 splines, sintered
Dimensions (mm): 41 x 45, 21 grooves | Material specifications: Sintered clutch ...
€517,97 €428,07 €476,53 €393,83
 
HELLA Alternator 14 V, 55 A without belt pulley Deutz-Fahr
23%
HELLA
Alternator 14 V, 55 A without belt pulley Deutz-Fahr
Charging current (A): 55 | Nominal voltage (V): 14 | Additional information: Wit...
€644,17 €532,37 €496,33 €410,19
 
Showing 49 - 96 of 277

Deutz-Fahr AgroStar 6.11 parts for engine work and servicing

Stripping the engine on an AgroStar 6.11 is a job you want to do once, with every gasket and seal on the bench before you start. This page lists more than 250 parts that fit the Deutz-Fahr AgroStar 6.11, from GRANIT, HELLA, VICTOR REINZ, MAHLE and Walterscheid.

Engine parts

  • Cylinder head gaskets and exhaust gaskets
  • Crankshaft seals for the Deutz engine
  • Shims for the cylinder liners
  • Seal kits
  • Repair sets for the fuel feed pump

Measure liner protrusion before choosing shims

The shim under the collar of each cylinder liner sets how far the liner stands proud of the block. Too little protrusion and the head gasket is not clamped properly, which leads to a blown gasket. During a rebuild, measure the protrusion of every liner with a dial gauge and choose the shim thickness from that reading. Reusing the old shims without measuring is a gamble, as they settle over the years. Then torque the cylinder head down in the correct sequence and in stages.

Beyond the engine

The electrical side is covered with alternators and starter motors. For the driveline there are clutch plates, including versions with a torsion damper. The hydraulics get sealing rings for the lift shaft, and the brakes get fixed calipers supplied complete without lining. In the cab you will find door locks and gas struts for the door and windows, and at the back there are drawbar frames.

One more workshop habit: a new crankshaft seal can leak if its lip runs in the groove worn by the old one. Clean the shaft, oil the lip lightly and, if the groove is deep, press the new seal in slightly less far so it runs on clean metal.

Finding the matching part

The serial number of your AgroStar 6.11 is on the type plate. For engine parts the engine type matters as well, and that is marked on the block. The reference number on an old alternator, starter or caliper makes the comparison with the parts on this page straightforward.

Other AgroStar models

The AgroStar series includes these tractors, each with its own page:

If you run one of them next to the 6.11, check fitment on that model's own page. Older Deutz tractors and other ranges are on the page with all Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart