Menu
EUR

Tractor parts Deutz-Fahr AgroStar 6.31

Looking for parts for your Deutz-Fahr AgroStar 6.31 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

274 parts found for Deutz-Fahr AgroStar 6.31
Show:
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
9%
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor
€183,88 €151,97 €167,35 €138,31
 
PROBOSS Tractor seat air suspended fabric, 480 mm, 12 V, AS2480
4%
PROBOSS
Tractor seat air suspended fabric, 480 mm, 12 V, AS2480
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment, longit...
€861,12 €711,67 €825,20 €681,98
 
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
9%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €272,80 €225,45
 
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
4%
PROBOSS
Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustm...
€827,03 €683,50 €792,55 €655,00
 
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
9%
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€374,78 €309,74 €341,15 €281,94
 
MAHLE Alternator 14 V / 80 A, flange 56 mm, pulley-Ø 68 mm
40%
MAHLE
Alternator 14 V / 80 A, flange 56 mm, pulley-Ø 68 mm
Additional information: Dust-tight with W connection | Flange size (mm): 56,0 | ...
€358,59 €296,36 €214,75 €177,48
 
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
Version: Set of parts.
€19,15 €15,83
 
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
9%
Stabilus
Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
To fit as: Deutz Door, windscreen or rear screen
€47,75 €39,46 €43,45 €35,91
 
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
40%
MAHLE
Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€662,73 €547,71 €396,90 €328,02
 
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
4%
BOSCH
Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,50 €453,31
 
GRANIT Repair set polyurethane beglazingskit, Terostat primer - 310 ml
9%
GRANIT
Repair set polyurethane beglazingskit, Terostat primer - 310 ml
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - Wool wiper...
€58,03 €47,96 €52,80 €43,64
 
Cobo Contact switch mechanical PTO clutch 540 / 1000 rpm.
9%
Cobo
Contact switch mechanical PTO clutch 540 / 1000 rpm.
Version: For PTO clutch, 540/1000 rpm. To fit: Deutz, Lamborghini, Same.
€38,45 €31,78 €34,95 €28,88
 
AKS-Dasis Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
9%
AKS-Dasis
Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 12 | Additio...
€504,50 €416,94 €459,25 €379,55
 
LUK Clutch kit Deutz-Fahr AgroStar 4.61 - 4.78, 6.08 - 6.61
5%
LUK
Clutch kit Deutz-Fahr AgroStar 4.61 - 4.78, 6.08 - 6.61
Contents: Pressure plate 458133023111, clutch plate 458333005911, release bearin...
€1.229,18 €1.015,85 €1.172,45 €968,97
 
Expansion valve airco 1/2 inch o-ring, 35 g
9%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Co...
€54,07 €44,69 €49,20 €40,66
 
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€32,10 €26,53
 
GRANIT Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
GRANIT
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, ...
€35,00 €28,93
 
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
21%
Walterscheid
Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 ...
€1.104,81 €913,07 €873,45 €721,86
 
MANN-FILTER Air filter C17225/3
40%
MANN-FILTER
Air filter C17225/3
Suitable secondary element 565CF800
€67,77 €56,01 €40,55 €33,51
 
Walterscheid Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
21%
Walterscheid
Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
Description: This product is an automatic trailer hitch. The jaw dimensions and ...
€2.193,20 €1.812,56 €1.733,95 €1.433,02
 
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
21%
Walterscheid
Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ...
€2.146,48 €1.773,95 €1.697,00 €1.402,48
 
Bosch/Rexroth Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
9%
Bosch/Rexroth
Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole pattern (mm): ...
€653,73 €540,27 €595,15 €491,86
 
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
Version: Ø 38 x 3 mm.
€7,65 €6,32
 
Showing 1 - 24 of 274

Parts for your Deutz-Fahr AgroStar 6.31 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr AgroStar 6.31. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr AgroStar 6.31. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr AgroStar 6.31. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart