Web Analytics
Deutz-Fahr AgroStar 6.31 tractor parts
Menu
EUR

Tractor parts Deutz-Fahr AgroStar 6.31

Looking for parts for your Deutz-Fahr AgroStar 6.31 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

255 parts found for Deutz-Fahr AgroStar 6.31
Show:
HELLA Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
15%
HELLA
Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€15,58 €12,88 €13,19 €10,90
 
GRANIT Silencer vertical 1210 mm, Ø 74 mm Deutz-Fahr
15%
GRANIT
Silencer vertical 1210 mm, Ø 74 mm Deutz-Fahr
To fit as: Deutz AgroStar 4.61, 4.71, 6.11, 6.21, 6.31, 4.68, 4.78, 6.08, 6.28, ...
€232,86 €192,45 €198,64 €164,17
 
HELLA Work lamp flood beam Double Beam H3 12 / 24 V, bending angle 25 - 35
HELLA
Work lamp flood beam Double Beam H3 12 / 24 V, bending angle 25 - 35
Installation location: Universal | Bulbs included: No | Connection: Open cable e...
€99,50 €82,23
 
Bosch/Rexroth Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
Bosch/Rexroth
Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole pattern (mm): ...
€621,91 €513,98
 
Scharmüller Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
Scharmüller
Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota grey | Guide...
€1.490,33 €1.231,68
 
Scharmüller Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
Scharmüller
Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 330 | Detent...
€1.393,30 €1.151,49
 
Scharmüller Drawbar frame 43,2 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Scharmüller
Drawbar frame 43,2 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (kg): 2000 | ...
€1.161,31 €959,76
 
MAHLE Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
25%
MAHLE
Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additional informat...
€293,92 €242,91 €221,04 €182,68
 
GRANIT Clutch master cylinder Ø 25,4 mm gray cast iron Deutz-Fahr
GRANIT
Clutch master cylinder Ø 25,4 mm gray cast iron Deutz-Fahr
Material: Grey cast iron | Hole Ø (mm): 25.4
€266,63 €220,36
 
LUK Clutch kit Deutz-Fahr AgroStar 4.61 - 6.38
2%
LUK
Clutch kit Deutz-Fahr AgroStar 4.61 - 6.38
Contents: Pressure plate 458133023111, clutch plate 458333006511, release bearin...
€1.287,77 €1.064,27 €1.259,04 €1.040,53
 
LUK Clutch plate 41 x 45 mm, 21 splines Deutz-Fahr AgroStar 4.61 - 6.38
2%
LUK
Clutch plate 41 x 45 mm, 21 splines Deutz-Fahr AgroStar 4.61 - 6.38
Dimensions (mm): 41 x 45 21 grooves
€621,96 €514,02 €608,08 €502,55
 
LUK Single clutch TGFR Deutz-Fahr AgroStar 4.61 - 6.38
2%
LUK
Single clutch TGFR Deutz-Fahr AgroStar 4.61 - 6.38
€772,31 €638,27 €755,08 €624,03
 
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
10%
HELLA
Alternator CA1433IR 14 V / 95 A without belt pulley
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Wit...
€482,98 €399,16 €435,89 €360,24
 
GRANIT Clutch plate 330 44 x 48 mm, 22 splines Deutz-Fahr
GRANIT
Clutch plate 330 44 x 48 mm, 22 splines Deutz-Fahr
Material specifications: Sintered clutch lining | Additional information: Made i...
€526,38 €435,02
 
GRANIT Diaphragm pressure plate GMF 330 Deutz-Fahr AgroStar 4.61 - 6.38
GRANIT
Diaphragm pressure plate GMF 330 Deutz-Fahr AgroStar 4.61 - 6.38
Additional information: Made in Germany
€677,00 €559,50
 
MAHLE Alternator 14 V, 55 A, flange 56 mm Deutz-Fahr, Fendt
25%
MAHLE
Alternator 14 V, 55 A, flange 56 mm Deutz-Fahr, Fendt
Direction of rotation: ↻ | Belt width (mm) / type: - | Mounting L / d / R (mm): ...
€301,87 €249,48 €227,03 €187,63
 
MAHLE Alternator 14 V, 65 A, flange 56 mm, with fan
25%
MAHLE
Alternator 14 V, 65 A, flange 56 mm, with fan
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal values (V / A): 1...
€275,76 €227,90 €207,39 €171,40
 
GRANIT Alternator 14 V / 65 A, flange 56 mm Deutz-Fahr, Fendt, Steyr
GRANIT
Alternator 14 V / 65 A, flange 56 mm Deutz-Fahr, Fendt, Steyr
Charging current (A): 65 | Mounting L / d / R (mm): 56,0 / 8,0 / 86,0 | Installa...
€162,05 €133,93
 
BOSCH Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
5%
BOSCH
Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
€490,92 €405,72 €466,67 €385,68
 
Master brake cylinder Ø 20,64 mm, DOT4 Deutz-Fahr AgroStar 4.61-6.61
15%
Master brake cylinder Ø 20,64 mm, DOT4 Deutz-Fahr AgroStar 4.61-6.61
Medium: DOT4. Hole Ø: 20.64 mm.
€570,79 €471,73 €485,17 €400,97
 
GRANIT Fixed caliper, complete for cardan shaft, DOT 4 Deutz-Fahr
15%
GRANIT
Fixed caliper, complete for cardan shaft, DOT 4 Deutz-Fahr
€748,24 €618,38 €636,00 €525,62
 
GRANIT Indicator brake lining foot brake Deutz-Fahr AgroPrima, AgroStar, AgroXtra
2%
GRANIT
Indicator brake lining foot brake Deutz-Fahr AgroPrima, AgroStar, AgroXtra
€51,91 €42,90 €50,87 €42,04
 
GRANIT Set of parts foot brake Deutz-Fahr AgroPrima, AgroStar, AgroXtra
2%
GRANIT
Set of parts foot brake Deutz-Fahr AgroPrima, AgroStar, AgroXtra
Description: Does NOT fit Agrostar 6.61.
€66,67 €55,10 €65,34 €54,00
 
GRANIT Repair set brake cylinder without piston Deutz-Fahr
GRANIT
Repair set brake cylinder without piston Deutz-Fahr
Additional information: Without piston.
€53,61 €44,31
 
Showing 121 - 144 of 255

Parts for your Deutz-Fahr AgroStar 6.31 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr AgroStar 6.31. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr AgroStar 6.31. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr AgroStar 6.31. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart