Menu
EUR

Deutz-Fahr AgroStar 6.61 tractor parts & technical data

Whether you need trailer couplings, lighting or electrics, this page brings together more than 200 parts for the Deutz-Fahr AgroStar 6.61 tractor.

232 parts found for Deutz-Fahr AgroStar 6.61
Show:
Knott Industrietechnik Tension spring brake lining 89 mm, thread-Ø 2 mm, outer-Ø 10 mm Deutz-Fahr
Knott Industrietechnik
Tension spring brake lining 89 mm, thread-Ø 2 mm, outer-Ø 10 mm Deutz-Fahr
Length: 83,5 mm mm. Wire thickness: 2 mm mm.
€4,53 €3,74
 
GRANIT Brake disc Ø 315 mm, 22 mm thick, 8-hole, for cardan shaft Deutz-Fahr
5%
GRANIT
Brake disc Ø 315 mm, 22 mm thick, 8-hole, for cardan shaft Deutz-Fahr
Menke no.: 68279.
€396,76 €327,90 €376,90 €311,49
 
PTO shaft end piece 299 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
5%
PTO shaft end piece 299 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
Version: Length 299 mm, 1 3/8", 6 splines, for 540 rpm.
€447,82 €370,10 €425,40 €351,57
 
GRANIT Flywheel 129 teeth Deutz-Fahr
5%
GRANIT
Flywheel 129 teeth Deutz-Fahr
Number of teeth: 129.
€2.070,88 €1.711,47 €1.967,30 €1.625,87
 
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
5%
GRANIT
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth.
€79,53 €65,73 €75,55 €62,44
 
GRANIT Shaft seal Ø 25 mm, height 8 mm, FPM Fendt, Deutz-Fahr
5%
GRANIT
Shaft seal Ø 25 mm, height 8 mm, FPM Fendt, Deutz-Fahr
Material: FPM (fluorinated rubber). Inner Ø d1: 25 mm. Height 1: 8 mm.
€46,08 €38,08 €43,75 €36,16
 
O-ring oil pump 14,5 x 3 mm Fendt, Renault, Deutz-Fahr
O-ring oil pump 14,5 x 3 mm Fendt, Renault, Deutz-Fahr
Dimensions: 14.5 x 3 mm.
€7,90 €6,53
 
GRANIT Thrust washer set front and rear thickness 2,94 mm Deutz-Fahr
GRANIT
Thrust washer set front and rear thickness 2,94 mm Deutz-Fahr
Engine types: FL913, BFL913. Dimensions: Thickness 2.94 mm.
€34,75 €28,72
 
GRANIT Seal feed pump
GRANIT
Seal feed pump
€2,76 €2,28
 
Tappet tube spring Fendt, Deutz-Fahr
Tappet tube spring Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL812, FL712.
€7,20 €5,95
 
GRANIT Valve guide inlet and outlet Fendt, Deutz-Fahr
GRANIT
Valve guide inlet and outlet Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€7,75 €6,41
 
Outlet valve new version 3-rings Deutz engine F2L912-BF6L913
Outlet valve new version 3-rings Deutz engine F2L912-BF6L913
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€33,00 €27,27
 
Bolt set 2de steering valve 3x M8 x 180
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit...
€27,90 €23,06
 
GRANIT Control unit 220 bar, 40 l/min, 220 x Ø 58 mm Deutz-Fahr
5%
GRANIT
Control unit 220 bar, 40 l/min, 220 x Ø 58 mm Deutz-Fahr
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 40 l/m...
€595,67 €492,29 €565,85 €467,64
 
GRAMMER Tractor seat Maximo Professional Deutz, Deutz-Fahr
GRAMMER
Tractor seat Maximo Professional Deutz, Deutz-Fahr
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric. Seat cont...
€2.531,15 €2.091,86
 
Bush right lift arm 74 x 80 x 85 mm Deutz-Fahr
5%
Bush right lift arm 74 x 80 x 85 mm Deutz-Fahr
Dimensions: 74 x 80 x 85 mm.
€171,94 €142,10 €163,30 €134,96
 
Sealing ring piston 70 x 89 x 12 mm Deutz-Fahr
5%
Sealing ring piston 70 x 89 x 12 mm Deutz-Fahr
Dimensions: 70 x 89 x 12 mm.
€39,26 €32,45 €37,25 €30,79
 
GRANIT Sealing ring lift shaft left 75 x 90 x 10 mm, NBR Deutz-Fahr
10%
GRANIT
Sealing ring lift shaft left 75 x 90 x 10 mm, NBR Deutz-Fahr
Dimensions: 75 x 90 x 10 mm. Material: NBR.
€38,18 €31,55 €34,50 €28,51
 
Step 340 x 160 x 30 mm Deutz-Fahr Agroprima, Agrostar, Agroxtra, DX
5%
Step 340 x 160 x 30 mm Deutz-Fahr Agroprima, Agrostar, Agroxtra, DX
Dimensions: 340x160x30mm mm.
€90,48 €74,78 €85,95 €71,03
 
GRANIT Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
GRANIT
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade...
€26,20 €21,65
 
Temperature warning switch 6 - 24 V, M14 x 1,5 mm, up to 100 °C
10%
Temperature warning switch 6 - 24 V, M14 x 1,5 mm, up to 100 °C
Version: Flat head | 6 - 24 V | M14 x 1.5 | Up to max. 100. Connection: Flat hea...
€86,68 €71,64 €78,40 €64,79
 
Replacement key plastic-coated black, lock number 14607
Replacement key plastic-coated black, lock number 14607
Version: Locking no. 14607 | To fit: New Holland, Steyr
€7,25 €5,99
 
Showing 97 - 120 of 232

Deutz-Fahr AgroStar 6.61 parts for seals, clutch and cab

Oil weeping from the lift housing, a cab door that no longer stays open, a clutch that starts to slip under heavy draft work. On an AgroStar 6.61 with plenty of hours behind it, these are familiar jobs. This page brings together more than 200 replacement parts that fit this tractor, from makers such as GRANIT, HELLA, Walterscheid, ROCKINGER and Knott Industrietechnik.

Stopping leaks on engine and linkage

For sealing work there are sealing rings, individual seals, complete seal kits and gaskets. Examples include the lift shaft sealing ring, the lift housing gasket and a thin seal for the hydraulic pump. You will also find crankshaft seals for the Deutz engine, shims for setting end play and bleed valves.

A tip for the crankshaft seal: inspect the running surface on the shaft before fitting anything. If the old seal has worn a groove into it, a new seal sitting in exactly the same spot will soon leak again. Clean the surface, wipe a little engine oil on the lip and press the seal in squarely with a suitable drift rather than tapping the seal itself with a hammer.

Driveline, hitch and cab

The driveline side covers clutch kits and V-belts. A belt that squeals or shows glazed flanks is due for replacement, and where two belts run side by side, change them as a pair so they share the load evenly. At the rear there are drawbars for the linkage.

Around the cab you will find gas struts for the door and windows, door locks, contact switches and tractor seats. If a window has to be bonded back in, there is a repair set with sealant and primer. When two gas struts carry the same window, replace both together, otherwise the tired old strut leaves the new one doing all the work.

Picking the part that fits

When a part comes in more than one version, check the type plate of your AgroStar and note the model and chassis number. If you still have the worn part, look for a stamped or cast reference number on it. That number makes it quick to match the old part against what you see on this page.

Running other tractors from the AgroStar series as well? Each of these models has its own page listing the parts that suit it:

Every other model from the brand is listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart