Menu
EUR

Deutz-Fahr Agrotron 6.30 tractor parts & technical data

See more than 200 parts for the Deutz-Fahr Agrotron 6.30. The range runs from trailer couplings to lighting and electrics, so the right part is quick to find.

203 parts found for Deutz-Fahr Agrotron 6.30
Show:
Knob green for hydraulics, electronic control
Version: For hydraulics, electronic control. More
Version: For hydraulics, electronic control.
€39,40 €32,56
Centa Elastic clutch 2x 4 bores, size 28 Deutz-Fahr Agrotron
Centa
Version: 2x 4 holes Size 28 More
Version: 2x 4 holes Size 28
€819,36 €677,16 €741,30 €612,64
You save 10%
Sealing ring Deutz-Fahr Agrotron 4.70 - 165, K 90 - 610
€71,34 €58,96 €67,75 €55,99
You save 5%
AKS-Dasis Condenser 310 x 580 x 22 mm Deutz-Fahr Agrotron
AKS-Dasis
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 | Height (mm): 22 | Weight (g): 3.000 More
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 ...
€768,76 €635,34 €730,30 €603,55
You save 5%
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
HELLA
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 95 More
Charging current (A): 95 | Nominal voltage (V): 14 | Additional inform...
€507,13 €419,12 €388,30 €320,91
You save 23%
GRANIT Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
GRANIT
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€11,15 €9,21
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
MAHLE
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dust-tight, with fan | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Cha... More
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional info...
€320,94 €265,24 €200,55 €165,74
You save 38%
Elring Valve cover gasket inlet manifold Deutz engine BF6M1013
€49,38 €40,81 €46,90 €38,76
You save 5%
FEBI Fuel filter Ø 77,5 mm, height 125 mm, M16 x 1,5
€9,76 €8,07 €6,64 €5,49
You save 32%
FEBI Cab filter for C55102 and AF26108
€40,38 €33,37 €11,43 €9,45
You save 72%
Gaiter for brake linkage foot brake
€65,94 €54,50 €62,60 €51,74
You save 5%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
You save 5%
GRANIT Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
€65,62 €54,23 €62,30 €51,49
You save 5%
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth. More
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth.
€34,50 €28,51 €32,75 €27,07
You save 5%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
GRANIT Cylinder head gasket 1,6 mm, 2 bores, Deutz-Fahr Agrotron 100-260
€45,29 €37,43 €43,00 €35,54
You save 5%
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
Dimensions: 48 x 5 mm. More
Dimensions: 48 x 5 mm.
€4,28 €3,54
GRANIT Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
GRANIT
Version: 12 V, Thread M12 x 1.25. More
Version: 12 V, Thread M12 x 1.25.
€55,60 €45,95 €52,80 €43,64
You save 5%
Thrust washer set standard Deutz-Fahr
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E/EC. More
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E...
€36,72 €30,35 €34,85 €28,80
You save 5%
Showing 97 - 120 of 203

Deutz-Fahr Agrotron 6.30 parts for cab, hitch and engine

A roof hatch that will no longer stay open, a dead work lamp on the cab roof, or a hitch that has developed play after years of hauling. For the Agrotron 6.30 you will find more than 200 parts here, from GRANIT and from HELLA, Scharmüller, ROCKINGER and PROBOSS.

Cab and driver's seat

The cab takes up a good share of this page. There are gas struts for the roof hatch, HELLA work lamps, standard and wide-angle mirrors, rocker switches for the lights and symbols for the switches. For long days in the seat there are tractor seats, including the Maximo Professional, plus an adapter plate that lets a different seat sit on the existing console.

A tip on gas struts: wherever possible, fit them with the piston rod pointing down. That keeps the internal seal bathed in oil and the strut holds its force longer. Do not wait until the hatch drops shut by itself either. A strut that is noticeably weakening is the first thing to give up on a frosty morning.

Hitch and engine

For towing there are drawbars, top drawbars and Piton Fix units from Scharmüller and ROCKINGER. On the engine side you will find cylinder head gaskets, an intake manifold gasket, V-belts and ball joints for the steering.

When the head gasket is replaced, the block face has to be spotless. Remove old gasket material with a plastic scraper rather than an abrasive disc, so no grit ends up in coolant passages or oil drillings. Check the head with a straightedge. If it has warped, a new gasket will only help for a short while. Look at the V-belts during the same job, and if the flanks are cracked or glazed, replace them while everything is accessible.

Matching parts to the 6.30

The type plate gives the exact model. The Agrotron 6 models look much alike from the outside, so trust the plate rather than the bonnet. For a drawbar, the rail width of the existing bracket is the key measurement, so check it before ordering. For gaskets and belts, take the number from the old part as a reference number and compare it with the product details.

The Deutz-Fahr Agrotron 6.45 from the same range has its own page too. Every other tractor from the make is on Deutz-Fahr parts, which helps if an older Deutz or another Agrotron works alongside the 6.30.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart