Menu
EUR

Deutz-Fahr Agrotron 6.30 tractor parts & technical data

See more than 200 parts for the Deutz-Fahr Agrotron 6.30. The range runs from trailer couplings to lighting and electrics, so the right part is quick to find.

203 parts found for Deutz-Fahr Agrotron 6.30
Show:
GRANIT Air receiver gasket
€12,40 €10,25
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pulley Ø 102 mm. To fit: Deutz, Lamborghini, Same. More
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pu...
€94,04 €77,72 €89,30 €73,80
You save 5%
GRANIT Hydraulic pump 32 cm³/rpm., 13 splines Deutz-Fahr Agrotron 106-150
GRANIT
Drive shaft: Splined shaft SAE, Ø 21.8 Z13. Direction of rotation: Clockwise. Output volume: 32 cc/rev. More
Drive shaft: Splined shaft SAE, Ø 21.8 Z13. Direction of rotation: Cl...
€1.238,65 €1.023,68
GRANIT Replacement key plastic-coated black, lock number 14644
GRANIT
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: Deutz-Fahr</gt></lt>. More
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: D...
€17,70 €14,63
GRANIT Replacement glass 300 x 214 x 3 mm, can be heated, right / left, 12 V
GRANIT
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation location: Right/left. Volts: 12. Radius of curvature: 1800 mm. More
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation loc...
€70,52 €58,28 €63,80 €52,73
You save 10%
Gas strut hood 450 N, 325 mm Deutz-Fahr Agrotron 4.70-150
Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. To fit: bonnet. Form: 6. More
Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. To fit: bonnet...
€68,63 €56,72 €62,00 €51,24
You save 10%
Scharmüller Drawbar frame K80 330/25/32, 3500/4000 kg, black
Scharmüller
To fit as: Case IH Serie CS, CVX; Deutz-Fahr Serie Agrotron 4.70-6.45 (MK1), Agrotron 80-165 (MK2/MK3), Agrotron 80-180.7, Agrotron M, Agrotron TTV; H... More
To fit as: Case IH Serie CS, CVX; Deutz-Fahr Serie Agrotron 4.70-6.45 ...
€2.505,76 €2.070,88 €2.216,00 €1.831,41
You save 12%
HELLA Replacement cover orange with optics, test mark E4 6509 ECE
HELLA
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional information: • With pattern. More
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional informati...
€42,40 €35,04
HELLA Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
HELLA
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power consumption: 55 W. Type: Halogen. Light function: Close-range illumination. Additio... More
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power con...
€54,11 €44,72
Stabilus Gas strut roof window 150 N, 235 mm, stroke 81 mm Deutz-Fahr
Stabilus
To fit as: Deutz Roof hatch More
To fit as: Deutz Roof hatch
€28,15 €23,26
HELLA Work lamp flood beam Ultra beam H3 65 W, 12 / 24 V
HELLA
Connection: AMP plug | Power consumption (W): 65 | Bending angle: 15 - 20 | Dimensions W x H x D (mm): 115 x 214 x 97 | Light aperture (mm): □ 83 | ... More
Connection: AMP plug | Power consumption (W): 65 | Bending angle: 15 -...
€67,95 €56,16
FTE Clutch master cylinder mineral oil, gray cast iron, with piston rod
FTE
Medium: Mineral oil | Additional information: With piston rod | Material: Grey cast iron More
Medium: Mineral oil | Additional information: With piston rod | Materi...
€318,06 €262,86 €302,15 €249,71
You save 5%
GRANIT Aircon compressor 12 V, pulley-Ø 148 mm, 2 grooves
GRANIT
Fixing: EM | Reference no.: 4558FK 351130101, QP7H15-8091 | Refrigerant: R 134a | Cylinder capacity (cm³): 155 | Connection type: 7/8"", 3/4"" | Pull... More
Fixing: EM | Reference no.: 4558FK 351130101, QP7H15-8091 | Refrigeran...
€390,06 €322,36 €370,55 €306,24
You save 5%
Push button switch PTO shaft 48 V, button yellow, Ø 30 mm Agrotron
Version: 48 V switching voltage Yellow button, make contact Total button travel: 5 mm Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustproof and... More
Version: 48 V switching voltage Yellow button, make contact Total butt...
€38,00 €31,41
Elring Cylinder head gasket 1,4 mm, 1 bore, Ø 119 mm engine BF6M1013
Elring
Ø (mm): 119 | Material: Combined soft material/metal gasket More
Ø (mm): 119 | Material: Combined soft material/metal gasket
€105,88 €87,50 €100,55 €83,10
You save 5%
GRANIT Ball joint, complete left 450 mm, M22 x 1,5, M24 x 1,5
GRANIT
A: 450 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 28 mm. Taper: 24 - 28 mm. More
A: 450 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 28 mm. Taper...
€234,43 €193,74 €222,70 €184,05
You save 5%
Hand brake cable 1855 mm, M12 x 1,5 Deutz-Fahr Agrotron 4.70-150
Length: 1855 mm. Thread: M12 x 1.5. Dimensions: Length: 1855 mm, Thread M12 x 1.5. More
Length: 1855 mm. Thread: M12 x 1.5. Dimensions: Length: 1855 mm, Threa...
€198,92 €164,40 €188,95 €156,16
You save 5%
GRANIT Brake disc steel Ø 227 mm, knott version
€49,17 €40,64 €46,70 €38,60
You save 5%
Master brake cylinder Ø 23,81 mm, mineral oil Deutz-Fahr Agrotron
€279,96 €231,37 €265,95 €219,79
You save 5%
Internal plate powershift 1,5 mm thick, inner 70,7 mm, outer 110,9 mm
Version: Thickness: 1.5 mm, Inner: 70.7 mm, Outer: 110.9 mm, 36 teeth. More
Version: Thickness: 1.5 mm, Inner: 70.7 mm, Outer: 110.9 mm, 36 teeth.
€12,85 €10,62
VICTOR REINZ Cylinder head gasket thickness 1,7 mm, 3 bores
€125,38 €103,62 €119,10 €98,43
You save 5%
Showing 121 - 144 of 203

Deutz-Fahr Agrotron 6.30 parts for cab, hitch and engine

A roof hatch that will no longer stay open, a dead work lamp on the cab roof, or a hitch that has developed play after years of hauling. For the Agrotron 6.30 you will find more than 200 parts here, from GRANIT and from HELLA, Scharmüller, ROCKINGER and PROBOSS.

Cab and driver's seat

The cab takes up a good share of this page. There are gas struts for the roof hatch, HELLA work lamps, standard and wide-angle mirrors, rocker switches for the lights and symbols for the switches. For long days in the seat there are tractor seats, including the Maximo Professional, plus an adapter plate that lets a different seat sit on the existing console.

A tip on gas struts: wherever possible, fit them with the piston rod pointing down. That keeps the internal seal bathed in oil and the strut holds its force longer. Do not wait until the hatch drops shut by itself either. A strut that is noticeably weakening is the first thing to give up on a frosty morning.

Hitch and engine

For towing there are drawbars, top drawbars and Piton Fix units from Scharmüller and ROCKINGER. On the engine side you will find cylinder head gaskets, an intake manifold gasket, V-belts and ball joints for the steering.

When the head gasket is replaced, the block face has to be spotless. Remove old gasket material with a plastic scraper rather than an abrasive disc, so no grit ends up in coolant passages or oil drillings. Check the head with a straightedge. If it has warped, a new gasket will only help for a short while. Look at the V-belts during the same job, and if the flanks are cracked or glazed, replace them while everything is accessible.

Matching parts to the 6.30

The type plate gives the exact model. The Agrotron 6 models look much alike from the outside, so trust the plate rather than the bonnet. For a drawbar, the rail width of the existing bracket is the key measurement, so check it before ordering. For gaskets and belts, take the number from the old part as a reference number and compare it with the product details.

The Deutz-Fahr Agrotron 6.45 from the same range has its own page too. Every other tractor from the make is on Deutz-Fahr parts, which helps if an older Deutz or another Agrotron works alongside the 6.30.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart